Publications

Shekhawat, A., G. Walters, N. Yang, J. Guo, T. Nishida, and S. Moghaddam, Data retention and low voltage operation of Al2O3/Hf0.5Zr0.5O2 based ferroelectric tunnel junctions, 2020.

Xia, Z., L. Cattafesta, and H. Z. Fan, "Deconvolution microscopy for flow visualization in microchannels", Analytical Chemistry, vol. 79, no. 6, pp. 2576-2582, JUN, 2007.

Cheng, S., and D. P. Arnold, "Defining the coupling coefficient for electrodynamic transducers", J. Acous. Soc. Amer., vol. 134, no. 5, 11/2013.

Cheng, S., and D. P. Arnold, "Demonstration of a micromachined electrodynamic transformer and application in a resonant dc/ac power inverter", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Phipps, A., F. Liu, L. Cattafesta, M. Sheplak, and T. Nishida, "Demonstration of a wireless, self-powered electroacoustic liner system", J. Acoust. Soc. Am, vol. 125, no. 2, pp. 873-881, FEB, 2009.

Boniche, I., and C. Waits, "Demonstration of Ethanol and JP-8 Fuel Atomization Using Micromachined Silicon Multiplexed Electrosprays", U.S. Army Research Laboratory Technical Reports, ARL-TR-4816, May, 2009.

Kim, H-in., R. Bowrothu, W. Lee, C. Smith, L. Hayati, D. P. Arnold, and Y-K. Yoon, "Demonstration of Substrate-Embedded Nonreciprocal Millimeter-Wave Circulators For System-In-Packaging", 2022 IEEE 35th International Conference on Micro Electro Mechanical Systems Conference (MEMS)2022 IEEE 35th International Conference on Micro Electro Mechanical Systems Conference (MEMS), Tokyo, Japan, IEEE, 2022.

Kim, H-in., D. P. Arnold, and Y-K. Yoon, "Demonstration of Substrate-Embedded Nonreciprocal Millimeter-Wave Circulators For System-In-Packaging", 2022 IEEE 35th International Conference on Micro Electro Mechanical Systems Conference (MEMS), 2022.

Carroll, R. E., J. A. Little, B. P. Mann, and D. P. Arnold, "Demonstration of tunable energy propagation using magneto-mechanical oscillator arrays", Proc. 30th IEEE Conf. Micro Electro Mechanical Systems (MEMS 2017), Las Vegas, NV, 01/2017.

Carroll, R. E., J. A. Little, B. P. Mann, and D. P. Arnold, "Demonstration of tunable energy propagation using magneto-mechanical oscillator arrays", 2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), Las Vegas, NV, USA, IEEE, 2017.

Jia, K., S. Pal, L. Wu, D. Hamilton, and H. Xie, "Dental optical coherence tomography employing miniaturized MEMS-based imaging probe", Optical MEMS and Nanophotonics, 2009 IEEE/LEOS International Conference on, pp. 1 -2, 2009.

Filangeri, E., and T. Nishida, "Depth profile of thermal donor in boron-doped Czochralski-grown silicon", Journal of Applied Physics, vol. 75, pp. 7931-7934, JUN, 1994.

Kadirvel, K., R. Taylor, S. Horowitz, W. Hunt, M. Sheplak, and T. Nishida, "Design and Characterization of a MEMS Optical Microphone", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1030, Reno, NV, January, 2004.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.

Sun, J., C. Duan, S. Samuelson, and H. Xie, "Design and Characterization of MEMS Based Optical Coherence Tomography Endoscopic Probe", Biomedical OpticsBiomedical Optics and 3-D Imaging, Miami, FloridaWashington, D.C., OSA, pp. BTu3A.79, 2012.

Pal, S., and H. Xie, "Design and Fabrication of 2D Fast Electrothermal Micromirrors with Large Scan Range and Small Center Shift", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.

Tanguy, Q., S. Bargiel, H. Xie, N. Passilly, M. Barthès, O. Gaiffe, J. Rutkowski, P. Lutz, and C. Gorecki, "Design and Fabrication of a 2-Axis Electrothermal MEMS Micro-Scanner for Optical Coherence Tomography", Micromachines, vol. 8, issue 6, pp. 146, Jan-06-2017.

Tseng, V. F. G., and H. Xie, "Design and fabrication of a high-density multilayer metal–insulator–metal capacitor based on selective etching", Journal of Micromechanics and Microengineering, vol. 23, issue 3, pp. 035025, 03/2013.

Wang, H., Y. Yu, Z. Chen, H. Yang, H. Jiang, and H. Xie, "Design and Fabrication of a Piezoelectric Micromachined Ultrasonic Transducer Array Based on Ceramic PZT", IEEE Sensors, New Delhi, India, IEEE, 2018.

Tseng, V.F.-G., J. Li, X. Zhang, and H. Xie, "Design and fabrication of an electromagnetically actuated optical switch with precise tilt angle control", Optical MEMS and Nanophotonics (OMN), 2013 International Conference on, pp. 67-68, Aug, 2013.

Xie, H., Z. Pan, W. Frey, and G. K. Fedder, "Design and fabrication of an integrated CMOS-MEMS 3-axis accelerometer", Proc. of the 2003 Nanotechnology Conference, San Francisco, CA, USA, 2003.

Patrick, E., M. Ordonez, C. Batich, J. C. Sanchez, and T. Nishida, "Design and Fabrication of Flexible Substrate Microelectrode Array for Brain Machine Interfaces", IEEE EMBS, New York, NY, August, 2006.

Wang, M., I. Batarseh, K. Ngo, and H. Xie, "Design and Fabrication of Integrated Power Inductor Based on Silicon Molding Technology", Proc. of the 38th Annual IEEE Power Electronics Specialists Conference (PESC'07), Orlando, FL, IEEE, 06/2007.

Zhou, Y., J. Johnson, L. Wu, S. Maley, A. Ural, and H. Xie, "Design and Fabrication of Microheaters for Localized Carbon Nanotube Growth", 2008 8th IEEE Conference on Nanotechnology (NANO)2008 8th IEEE Conference on Nanotechnology, Arlington, Texas, USA, IEEE, pp. 452 - 455, 2008.

Oyarzun, M., and L. Cattafesta, "Design and Optimization of Piezoceramic Zero-Net Mass-Flux Actuators", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 07/2010.