Publications

Found 57 results
Author Title Type [ Year(Asc)]
Filters: First Letter Of Title is A  [Clear All Filters]
2020
Rassay, S., F. Hakim, M. Ramezani, and R. Tabrizian, "Acoustically Coupled Wideband RF Filters with Bandwidth Reconfigurablity Using Ferroelectric Aluminum Scandium Nitride Film", 2020 IEEE 33rd International Conference on Micro Electro Mechanical Systems (MEMS)2020 IEEE 33rd International Conference on Micro Electro Mechanical Systems (MEMS), Vancouver, BC, Canada, IEEE, 2020.
Tasneem, Z., C. Adhivarahan, D. Wang, H. Xie, and K. Dantu, Adaptive fovea for scanning depth sensors, 2020.
2018
Bauer, M., D. P. Arnold, and J. Andrew, "Arrays of Janus-Type Magnetoelectric Nanowires for Passive Magnetic Field Sensing", 2018 IEEE 18th International Conference on Nanotechnology (IEEE-NANO), Cork, Ireland, IEEE, 2018.
2017
Liu, Y., D. Wang, and D. F. Wang, "Analytical study on effect of piezoelectric patterns on frequency shift and support loss in ring-shaped resonators for biomedical applications", Microsystem Technologies, vol. 23, issue 7, pp. 2899 - 2909, Jan-07-2017.
Jo, B., M. Ghatge, and R. Tabrizian, "Anti-symmetric shear-extensional AlN lamb-wave resonators with kt 2 > 4%", 2017 Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium ((EFTF/IFC), BESANÇON, France, IEEE, 2017.
Bauer, M., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Assembly of magnetoelectric nanowires into magnetic field sensors", 2017 Electronic Materials and Applications Conference, Orlando, FL, 2017.
Cheng, J., W. Liu, Q. Chen, N. Xu, Q. Sun, Y. Liu, W. Wang, and H. Xie, "An auto-aligned vertical comb drive for low-cost variable optical attenuators", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.
Hsu, A., C. Cowan, W. Chu, B. McCoy, A. Wong-Foy, R. Pelrine, C. Velez, D. P. Arnold, J. Lake, J. Ballard, et al., "Automated 2D micro-assembly using diamagnetically levitated milli-robots", 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Montreal, QC, IEEE, 2017.
2016
Garraud, A., and D. P. Arnold, "Advancements in electrodynamic wireless power transmission", IEEE Sensors Conf., Orlando,FL, 10.2016.
Garraud, A., and D. P. Arnold, "Advancements in electrodynamic wireless power transmission", 2016 IEEE SENSORS, Orlando, FL, USA, IEEE, 2016.
Bigham, S., and S. Moghaddam, "Analysis of Microchannel Flow Boiling Process using Unprecedented Microscale Experimental Data", ASME HT/FE/ICNMM 2016, 2016.
Lomenzo, P. D., Q. Takmeel, S. Moghaddam, and T. Nishida, "Annealing behavior of ferroelectric Si-doped HfO2 thin films", Thin Solid Films, vol. 615, pp. 139 - 144, Jan-09-2016.
Zhang, J., and H. Z. Fan, "Aptamer-enabled tumor cell isolation", Circulating Tumor Cells: Isolation and Analysis : Wiley, 2016.
2013
Isfahani, R. Nasr, and S. Moghaddam, "Absorption characteristics of lithium bromide (LiBr) solution constrained by superhydrophobic nanofibrous structures", International Journal of Heat and Mass Transfer, vol. 63, pp. 82 - 90, Jan-08-2013.
R Isfahani, N., and S. Moghaddam, "Absorption Characteristics of Thin Lithium Bromide (LiBr) Solution Film Constrained by a Porous Hydrophobic Membrane", ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, Sapporo, Japan, 06/2013.
Rao, Y., and D. P. Arnold, "An ac/dc voltage doubler with configurable power supply schemes for vibrational energy harvesting", Proc. 28th Applied Power Electronics Conf. & Exposition (APEC 2013), Long Beach, CA, IEEE, 03/2013.
2011
Cheng, S., Y. Jin, Y. Rao, and D. P. Arnold, "An active voltage doubling ac/dc converter for low-voltage energy harvesting applications", IEEE Transactions on Power Electronics, vol. 26, no. 8, pp. 2258-2265, 08/2011.
Cattafesta, L., and M. Sheplak, "Actuators for Active Flow Control", Annual Review of Fluid Mechanics, vol. 43, no. 1, pp. 247–272, 2011.
Arnold, D. P., Y.K. Yoon, and M. Saumer, "Additive Processes for Metals", MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.