Publications

Song, Q., Y. Tian, and L. Cattafesta, "MIMO Feedback Control of Flow Separation", 45th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2007-0109, Reno, NV, January, 2007.

Wu, L., A. Pais, S. Samuelson, S. Guo, and H. Xie, "A Miniature Fourier Transform Spectrometer by a Large-Vertical-Displacement Microelectromechanical Mirror", OSA Spring Optics & Photonics Congress,, Vancouver, Canada, April, 2009.

Wu, L., A. Pais, S. Samuelson, S. Guo, and H. Xie, "A Miniature Fourier Transform Spectrometer by a Large-Vertical-Displacement Microelectromechanical Mirror", Fourier Transform Spectroscopy: Optical Society of America, pp. FWD4, 2009.

Zhou, L., X. Zhang, Y. Sung, W-C. Shih, and H. Xie, "A Miniature Lens Scanner with an Electrothermally-Actuated Micro-Stage", 2018 International Conference on Optical MEMS and Nanophotonics (OMN)2018 International Conference on Optical MEMS and Nanophotonics (OMN), Lausanne, Switzerland, IEEE, 2018.

Liao, W., W. Liu, L. Xi, J. Sun, Y. Zhu, L. Wu, H. Jiang, and H. Xie, "Miniature Photoacoustic Imaging Probe Using MEMS Scanning Micromirror", IEEE Optical MEMS and Nanophotonics, Istanbul, Turkey, 08/2011.

Wu, L., A. Pais, S. Samuelson, S. Guo, and H. Xie, "A mirror-tilt-insensitive Fourier transform spectrometer based on a large vertical displacement micromirror with dual reflective surface", 15th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2009), Denver, CO., IEEE, 06/2009.

Oniku, O. D., and D. P. Arnold, "Mitigation of interfacial silicide reactions for electroplated CoPt films on Si substrates", Journal of Physics: Conference Series, vol. 660, no. 1, pp. 012140, 2015.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.

Cattafesta, L., J. Mathew, and A. Kurdila, "Modeling and Design of Piezoelectric Actuators for Fluid Control", World Aviation Conference, San Diego, CA, October, 2000.

Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.

Oniku, O. D., A. Garraud, E. Shorman, W. C. Patterson, and D. P. Arnold, "Modeling of a micromagnetic imprinting process", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2014), Hilton Head, SC, pp. 187-190, 06/2014.

Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", 2009 ASME International Mechanical Engineering Congress, Lake Buena Vista, FL, November, 2009.

Yu, D., J. Chung, and S. Moghaddam, "Modeling of Membrane-based Absorption Process in a New Generation LiBr-Water Absorption Refrigeration System", ASME 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, Atlanta, GA, 03/2012.

Arunajatesan, S., M. Oyarzun, M. Palavicini, and L. Cattafesta, "Modeling of Zero-Net Mass-Flux Actuators for Feedback Flow Control", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0743, January, 2009.

Naughton, J., and M. Sheplak, "Modern Skin Friction Measurement Techniques: Description, Use, and What to Do with the Data", 21st AIAA Advanced Measurement Technology and Ground Testing Conference, AIAA Paper 2000-2521, Denver, CO, June, 2000.

Chung, J., and S. Moghaddam, "Molecular Dynamics Simulation of Phases Interactions in Membrane-based Absorption and Desorption Processes", ASME 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, Atlanta, GA, 03/2012.

Qu, H., D. Fang, and H. Xie, "A Monolithic CMOS-MEMS 3-Axis Accelerometer with A Low-Noise, Low-Power Dual Chopper Amplifier", Solid-state Sensors, Actuators and Microsystem Workshop, Hilton Head, SC, pp. 224-227, June, 2006.

Xie, H., "Monolithic CNT-CMOS Integration by Maskless Post-CMOS Microfabrication and Localized Heating", CMOS Emerging Technologies Workshop, Vancouver, BC, Canada, 2009.

Sun, H., K. Jia, Y. Ding, Z. Yang Guo, X. Liu, G. Zhen Yan, and H. Xie, "A monolithic inertial measurement unit fabricated with improved DRIE post-CMOS process", 2010 Ninth IEEE Sensors Conference (SENSORS 2010)2010 IEEE Sensors, Kona, HI, IEEE, pp. 1198 - 1202, 2010.

Sun, H., K. Jia, Z. Yang Guo, X. S. Liu, G. Zhen Yan, and H. Xie, A Monolithic Inertial Measurement Unit Fabricated with Improved DRIE Post-CMOS Process: IEEE, 2010.

Wang, W., J. Chen, Q. Tanguy, and H. Xie, "A Monolithic Michelson interferometer with a large piston MEMS micromirror", 2016 International Conference on Optical MEMS and Nanophotonics (OMN), Singapore, Singapore, IEEE, 2016.

Jia, K., and H. Xie, "Multi-Axis Electrothermal Scanning Micromirror with Low Driving Voltage", 2007 Conference on Lasers and Electro-Optics (CLEO)2007 Conference on Lasers and Electro-Optics (CLEO), Baltimore, MD, USA, IEEE, pp. 1 - 2, 2007.

Xie, H., H. Sun, K. Jia, D. Fang, and H. Qu, "Multi-axis integrated CMOS-MEMS inertial sensors", 2010 10th IEEE International Conference on Solid-State and Integrated Circuit Technology (ICSICT)2010 10th IEEE International Conference on Solid-State and Integrated Circuit Technology, Shanghai, China, IEEE, pp. 1394 - 1395, 2010.

Cheng, S., and D. P. Arnold, "A Multi-Pole Magnetic Generator with Enhanced Voltage Output for Low-Frequency Vibrational Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2008), Sendai Japan, pp. 125-128, November, 2008.