Publications

Found 1228 results
Author Title [ Type(Desc)] Year
Conference Paper
Carroll, R. E., J. A. Little, B. P. Mann, and D. P. Arnold, "Demonstration of tunable energy propagation using magneto-mechanical oscillator arrays", 2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), Las Vegas, NV, USA, IEEE, 2017.
Jia, K., S. Pal, L. Wu, D. Hamilton, and H. Xie, "Dental optical coherence tomography employing miniaturized MEMS-based imaging probe", Optical MEMS and Nanophotonics, 2009 IEEE/LEOS International Conference on, pp. 1 -2, 2009.
Kadirvel, K., R. Taylor, S. Horowitz, W. Hunt, M. Sheplak, and T. Nishida, "Design and Characterization of a MEMS Optical Microphone", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1030, Reno, NV, January, 2004.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.
Sun, J., C. Duan, S. Samuelson, and H. Xie, "Design and Characterization of MEMS Based Optical Coherence Tomography Endoscopic Probe", Biomedical OpticsBiomedical Optics and 3-D Imaging, Miami, FloridaWashington, D.C., OSA, pp. BTu3A.79, 2012.
Pal, S., and H. Xie, "Design and Fabrication of 2D Fast Electrothermal Micromirrors with Large Scan Range and Small Center Shift", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.
Wang, H., Y. Yu, Z. Chen, H. Yang, H. Jiang, and H. Xie, "Design and Fabrication of a Piezoelectric Micromachined Ultrasonic Transducer Array Based on Ceramic PZT", IEEE Sensors, New Delhi, India, IEEE, 2018.
Tseng, V.F.-G., J. Li, X. Zhang, and H. Xie, "Design and fabrication of an electromagnetically actuated optical switch with precise tilt angle control", Optical MEMS and Nanophotonics (OMN), 2013 International Conference on, pp. 67-68, Aug, 2013.
Xie, H., Z. Pan, W. Frey, and G. K. Fedder, "Design and fabrication of an integrated CMOS-MEMS 3-axis accelerometer", Proc. of the 2003 Nanotechnology Conference, San Francisco, CA, USA, 2003.
Patrick, E., M. Ordonez, C. Batich, J. C. Sanchez, and T. Nishida, "Design and Fabrication of Flexible Substrate Microelectrode Array for Brain Machine Interfaces", IEEE EMBS, New York, NY, August, 2006.
Wang, M., I. Batarseh, K. Ngo, and H. Xie, "Design and Fabrication of Integrated Power Inductor Based on Silicon Molding Technology", Proc. of the 38th Annual IEEE Power Electronics Specialists Conference (PESC'07), Orlando, FL, IEEE, 06/2007.
Zhou, Y., J. Johnson, L. Wu, S. Maley, A. Ural, and H. Xie, "Design and Fabrication of Microheaters for Localized Carbon Nanotube Growth", 2008 8th IEEE Conference on Nanotechnology (NANO)2008 8th IEEE Conference on Nanotechnology, Arlington, Texas, USA, IEEE, pp. 452 - 455, 2008.
Oyarzun, M., and L. Cattafesta, "Design and Optimization of Piezoceramic Zero-Net Mass-Flux Actuators", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 07/2010.
Jansson, D., J. Mathew, J. Hubner, M. Sheplak, and L. Cattafesta, "Design and Validation of an Aeroacoustic Test Facility", 8th AIAA / CEAS Aeroacoustics Conference, AIAA Paper 2002-2466, Breckenridge, CO, June, 2002.
Desai, V. H., B. S. Spearman, C. S. Shafor, S. Natt, B. Teem, J. B. Graham, E. W. Atkinson, R. A. Wachs, E. A. Nunamaker, K. J. Otto, et al., "Design, fabrication, and characterization of a scalable tissue-engineered-electronic-nerve-interface (TEENI) device", 2017 8th International IEEE/EMBS Conference on Neural Engineering (NER), Shanghai, China, IEEE, 2017.
Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.
Kadirvel, K., D. Martin, J. Liu, R. M. Fox, M. Sheplak, L. Cattafesta, and T. Nishida, "Design, Modeling and Simulation of a Closed-Loop Controller for a Dual Backplate MEMS Capacitive Microphone", 6th IEEE Conference on Sensors, Atlanta, GA, pp. 87-90, October, 2007.
Homeijer, B., L. Cattafesta, T. Nishida, and M. Sheplak, "Design of a MEMS Piezoresistive Microphone for use in Aeroacoustic Measurements", 13th AIAA/CEAS Aeroacoustics Conference and Exhibit, Rome, Italy, May, 2007.
Masilamani, S., I. Boniche, C. D. Meyer, R. Durscher, and D. P. Arnold, "Design of a tubular microfabricated power generation system for hot exhaust streams", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Germany, pp. 249-252, November, 2007.
Williams, M. D., J. Zito, J. Agashe, A. Sopeju, and D. P. Arnold, "Design of an Electrodynamically Actuated Microvalve Using COMSOL Multiphysics and MATLAB", COMSOL Conference, Hannover, Germany, November, 2008.
Patrick, E., V. Sankar, W. Rowe, J. C. Sanchez, and T. Nishida, "Design of an Implantable Intracortical Microelectrode System for Brain-Machine Interfaces", 4th International IEEE EMBS Conference on Neural Engineering, Antalya, Turkey, April, 2009.
Wang, D., L. Fu, J. Sun, H. Jia, and H. Xie, "Design Optimization and Implementation of a Miniature Optical Coherence Tomography Probe Based on a MEMS Mirror", the 4th International Symposium on Photoelectronic Detection and Imaging (ISPDI 2011), Beijing, China, May 24- 26, 2011.
Liu, H., D. Wang, D. F. Wang, and D. Wang, "Developing a passive DC current sensor", 2016 IEEE SENSORS2016 IEEE SENSORS, Orlando, FL, USA, IEEE, 2016.
Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "Development of a MEMS Dual Backplate Capacitive Microphone for Aeroacoustic Measurements", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-1246, Reno, NV, January, 2006.
Freidkes, B., D. A. Mills, C. Keane, L. S. Ukeiley, and M. Sheplak, "Development of a Two-Dimensional Wall Shear Stress Sensor for Wind Tunnel Applications", AIAA Scitech 2019 ForumAIAA Scitech 2019 Forum, San Diego, CaliforniaReston, Virginia, American Institute of Aeronautics and Astronautics, 2019.