Publications

Wu, L., A. Pais, S. Samuelson, S. Guo, and H. Xie, "A Miniature Fourier Transform Spectrometer by a Large-Vertical-Displacement Microelectromechanical Mirror", OSA Spring Optics & Photonics Congress,, Vancouver, Canada, April, 2009.

Wu, L., A. Pais, S. Samuelson, S. Guo, and H. Xie, "A mirror-tilt-insensitive Fourier transform spectrometer based on a large vertical displacement micromirror with dual reflective surface", 15th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2009), Denver, CO., IEEE, 06/2009.

Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", 2009 ASME International Mechanical Engineering Congress, Lake Buena Vista, FL, November, 2009.

Arunajatesan, S., M. Oyarzun, M. Palavicini, and L. Cattafesta, "Modeling of Zero-Net Mass-Flux Actuators for Feedback Flow Control", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0743, January, 2009.

Xie, H., "Monolithic CNT-CMOS Integration by Maskless Post-CMOS Microfabrication and Localized Heating", CMOS Emerging Technologies Workshop, Vancouver, BC, Canada, 2009.

Shetye, S., and D. P. Arnold, "Magnetic self-assembly of millimeter scale components", 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN, 01/2008.

Cattafesta, L., "Measurement in Fluid Mechanics by S. Tavoularis", Theoretical and Computational Fluid Dynamics, vol. 22, no. 5, pp. 403-406, JUN, 2008.

Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.

Qu, H., D. Fang, and H. Xie, "A Monolithic CMOS-MEMS 3-Axis Accelerometer With a Low-Noise, Low-Power Dual-Chopper Amplifier", IEEE Sensors Journal, vol. 8, issue 9, pp. 1511 - 1518, 09/2008.

Cheng, S., and D. P. Arnold, "A Multi-Pole Magnetic Generator with Enhanced Voltage Output for Low-Frequency Vibrational Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2008), Sendai Japan, pp. 125-128, November, 2008.

Choi, Y., J-S. Lim, T. Numata, T. Nishida, T. Nishida, and S. Thompson, "Mechanical stress altered electron gate tunneling current and extraction of conduction band deformation potentials for germanium", Journal of Applied Physics, vol. 102, pp. 104507-1–104507-5, DEC, 2007.

Xie, H., "MEMS-based endoscopic optical coherence tomography", (invited) Proc. of the 3rd Asian and Pacific Rim Symposium on Biophotonics, Cairns, Australia, July, 2007.

Bowers, B., J. Agashe, and D. P. Arnold, "A method to form bonded micromagnets embedded in silicon", Proc. 14th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 07), vol. 2, pp. 1581-1584, June, 2007.

Jain, A., and H. Xie, "Microendoscopic Confocal Imaging Probe Based on an LVD Microlens Scanner", IEEE Journal of Selected Topics in Quantum Electronics, vol. 13, issue 2, pp. 228 - 234, 3/2007.

Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.

Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.

Song, Q., Y. Tian, and L. Cattafesta, "MIMO Feedback Control of Flow Separation", 45th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2007-0109, Reno, NV, January, 2007.

Cheng, S., N. Wang, and D. P. Arnold, "Modeling of magnetic vibrational energy harvesters using equivalent circuit representations", J. Micromech. Microeng., vol. 17, no. 11, pp. 2328-2335, NOV, 2007.

Murray, N., and L. Ukeiley, "Modified Quadratic Stochastic Estimation of Resonating Subsonic Cavity Flow", Journal of Turbulence, vol. 8, no. 53, DEC, 2007.

Jia, K., and H. Xie, "Multi-Axis Electrothermal Scanning Micromirror with Low Driving Voltage", 2007 Conference on Lasers and Electro-Optics (CLEO)2007 Conference on Lasers and Electro-Optics (CLEO), Baltimore, MD, USA, IEEE, pp. 1 - 2, 2007.

Guo, B., J. Li, H. Zmuda, and M. Sheplak, "Multifrequency Microwave-Induced Thermal Acoustic Imaging for Breast Cancer Detection", IEEE Trans. Bio. Eng., vol. 54, no. 11, pp. 2000-2010, NOV, 2007.

Liu, F., S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, "A multiple degree of freedom electromechanical Helmholtz resonator", J. Acoust. Soc. Am., vol. 122, no. 1, pp. 291-301, JUL, 2007.

Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines integrated into bulk-micromachined silicon", J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.

Lim, J., X. Yang, T. Nishida, and S. Thompson, "Measurement of Conduction Band Deformation Potential Constants Using Gate Direct Tunneling Current in n-MOSFETs Under Mechanical Stress", Applied Physics Letters, vol. 89, pp. 073509, AUG, 2006.

Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "A MEMS Acoustic Energy Harvester", J. Micromech. Microeng., vol. 16, pp. S174-S181, SEP, 2006.