Publications

Found 161 results
Author Title [ Type(Asc)] Year
Filters: Author is Lou Cattafesta  [Clear All Filters]
Conference Paper
Kasyap, A., A. Phipps, T. Nishida, M. Sheplak, and L. Cattafesta, "Development of MEMS-based Piezoelectric Vibration Energy Harvesters", SEC IMAC, 02/2010.
Agashe, J., D. P. Arnold, and L. Cattafesta, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2009.
Homeijer, B., L. Cattafesta, T. Nishida, and M. Sheplak, "Design of a MEMS Piezoresistive Microphone for use in Aeroacoustic Measurements", 13th AIAA/CEAS Aeroacoustics Conference and Exhibit, Rome, Italy, May, 2007.
Kadirvel, K., D. Martin, J. Liu, R. M. Fox, M. Sheplak, L. Cattafesta, and T. Nishida, "Design, Modeling and Simulation of a Closed-Loop Controller for a Dual Backplate MEMS Capacitive Microphone", 6th IEEE Conference on Sensors, Atlanta, GA, pp. 87-90, October, 2007.
Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.
Jansson, D., J. Mathew, J. Hubner, M. Sheplak, and L. Cattafesta, "Design and Validation of an Aeroacoustic Test Facility", 8th AIAA / CEAS Aeroacoustics Conference, AIAA Paper 2002-2466, Breckenridge, CO, June, 2002.
Oyarzun, M., and L. Cattafesta, "Design and Optimization of Piezoceramic Zero-Net Mass-Flux Actuators", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 07/2010.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.
Griffin, J., M. Oyarzun, L. Cattafesta, J. H. Tu, C. W. Rowley, and R. Mittal, "Control of a canonical separated flow", 43rd AIAA Fluid Dynamics Conference, San Diego, CA, 06/2013.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Compliant-Backplate Helmholtz Resonators for Active Noise Control Applications", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0817, Reno, NV, January, 2001.
Schultz, T., F. Liu, M. Sheplak, L. Cattafesta, and M. Jones, "A Comparison Study of Normal-Incidence Acoustic Impedance Measurements of a Perforate Liner", 15th AIAA/CEAS Aeroacoustics conference, AIAA 2009-3301, Miami, FL, May, 2009.
Bahr, C., and L. Cattafesta, "Comparison of Trailing Edge Noise Measurement Methods", Florida Center for Advanced Aero-Propulsion (FCAAP) - Annual Technical Symposium 2010, Tallahassee, August 2010.
Schultz, T., L. Cattafesta, and M. Sheplak, "Comparison of the two microphone method and the modal decomposition method for acoustic impedance testing", 12th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2006-2695, Cambridge, MA, May, 2006.
Sawant, S. G., I. Eskinazi, M. Sheplak, L. Cattafesta, and D. P. Arnold, "A comparative study of two methods for driving electrodynamic zero-net-mass-flux actuators", 6th AIAA Flow Control Conf., New Orleans, LA, AIAA, 06/2012.
Zawodny, N., F. Liu, T. Yardibi, and L. Cattafesta, "A Comparative Study of a 1/4-scale Gulfstream G550 Aircraft Nose Gear Model", 15th AIAA/CEAS Aeroacoustics Conference (30th AIAA Aeroacoustics Conference), AIAA Paper 2009-3153, May, 2009.
Sawant, S. G., E. A. Deem, D.J. Agentis, L. Cattafesta, and D. P. Arnold, "Chip-scale electrodynamic synthetic jet actuators", 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2015), Estoril, Portugal, IEEE, 01/2015.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0666, Reno, NV, January, 2002.
Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.
Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.
Benard, N., J-P. Bonnet, E. Moreau, J. Griffin, and L. Cattafesta, "Benefits of Using Hysteresis Effects for Closed-Loop Separation Control by Plasma Actuator", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.
Chandrasekaran, V., B. V. Sankar, L. Cattafesta, T. Nishida, and M. Sheplak, "An Analytical Model for Thermoelastic Actuation of Composite Diaphragms", 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.
Bahr, C., T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.
Bahr, C., F. Liu, and L. Cattafesta, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.
Wang, G., B. V. Sankar, L. Cattafesta, and M. Sheplak, "Analysis of a Composite Piezoelectric Circular Plate with Initial Stresses for MEMS", International Mechanical Engineering Congress & Exposition, ASME Paper IMECE2002-39337, New Orleans, LA, November, 2002.
Carroll, B., E. Boulos, M. Sytsma, L. Cattafesta, J. Hubner, and M. Sheplak, "Aero-Optic Measurement Facility Characterization", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.