Publications

Wu, L., S. Maley, S. Dooley, T.R. Nelson, P. F. McManamon, and H. Xie, "A large-aperture, piston-tip-tilt micromirror for optical phase array applications", 2008 IEEE 21st International Conference on Micro Electro Mechanical Systems2008 IEEE 21st International Conference on Micro Electro Mechanical Systems, Tucson, AZ, USA, IEEE, pp. 754 - 757, 2008.

Xie, H., "Large-Range Large-Aperture MEMS Micromirrors for Biomedical Imaging Applications", The 9th International Conference on Solid-State and Integrated-Circuit Technology , Beijing, China, 2008.

Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.

Shetye, S., and D. P. Arnold, "Magnetic self-assembly of millimeter scale components", 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN, 01/2008.

Cattafesta, L., "Measurement in Fluid Mechanics by S. Tavoularis", Theoretical and Computational Fluid Dynamics, vol. 22, no. 5, pp. 403-406, JUN, 2008.

Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.

Qu, H., D. Fang, and H. Xie, "A Monolithic CMOS-MEMS 3-Axis Accelerometer With a Low-Noise, Low-Power Dual-Chopper Amplifier", IEEE Sensors Journal, vol. 8, issue 9, pp. 1511 - 1518, 09/2008.

Cheng, S., and D. P. Arnold, "A Multi-Pole Magnetic Generator with Enhanced Voltage Output for Low-Frequency Vibrational Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2008), Sendai Japan, pp. 125-128, November, 2008.

Morrish, D., L. Wu, H. Xie, A. Boussioutas, and M. Gu, "Nonlinear imaging of tissue by an endoscope probe incorporating a 3D scanning MEMS mirror", Australian Institute of Physics 18th Annual Conference, Adelaide, Australia, 2008.

Liu, J., D. Martin, K. Kadirvel, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Nonlinear Model and System Identification of a Capacitive Dual-Backplate MEMS Microphone", J. Sound Vib., vol. 309, no. 1-2, pp. 276-292, JAN, 2008.

Yuan, Z. J., H. Ren, W.C. Waltzer, J. Kim, J. Liu, K. Jia, H. Xie, and Y. Pan, "Optical coherence tomography for bladder cancer diagnosis: from animal study to clinical diagnosis", Journal of Innovative Optical Health Sciences, vol. 1, 2008.

Papila, M., M. Sheplak, and L. Cattafesta, "Optimization of Clamped Circular Piezoelectric Composite Actuators", Sensors & Actuators A, vol. 147, no. 1, pp. 310-323, SEP, 2008.

Boniche, I., B. C. Morgan, P. Taylor, C. D. Meyer, and D. P. Arnold, "Process development and material characterization of polycrystalline Bi2Te3, PbTe, and PbSnSeTe thin films on silicon for millimeter-scale thermoelectric generators", J. Vacuum Sci. Tech. A, vol. 26, no. 4, pp. 739-744, JUL, 2008.

Pal, S., K. Jia, S. Maley, and H. Xie, "Reduced order thermal modeling of a one-dimensional electrothermally actuated micromirror device", MEMS/MOEMS Components and Their Applications V. Special Focus Topics: Transducers at the Micro-Nano Interface, vol. 6885, San Jose, CA, USA, SPIE, pp. 68850B - 68850B-11, 01/2008.

Shetye, S., I. Eskinazi, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", IEEE Trans. Magn., vol. 44, no. 11, pp. 4293-4296, NOV, 2008.

Smarslok, B. P., D. Alexander, R. T. Haftka, L. Carraro, and D. Ginsbourger, "Separable Monte Carlo Simulation Applied to Laminated Composite Plates Reliability", 49th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, AIAA, 04/2008.

Yardibi, T., J. Li, P. Stoica, and L. Cattafesta, "Sparsity Constrained Deconvolution Approaches for Acoustic Source Mapping", J. Acous. Soc. Amer., vol. 123, no. 5, pp. 2631-2642, MAY, 2008.

Bowers, B., and D. P. Arnold, "Spherical Magnetic Generators for Bio-Motional Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (Power MEMS 2008), Sendai, Japan, pp. 281-284, November, 2008.

Suthram, S., Y. Sun, P. Majhi, I. Ok, H. Kim, H. R. Harris, N. Goel, S. Parthasarathy, A. D. Koehler, A. Acosta, et al., "Strain Additivity in III-V Channels for CMOSFETs beyond 22nm Technology Node", 2008 VLSI Symposium on VLSI Technology, pp. 182-183, October, 2008.

Son, S. Y., Y. Choi, P. Kumar, H. W. Park, T. Nishida, R. K. Singh, and S. Thompson, "Strain induced changes in gate leakage current and dielectric constant of nitrided Hf-silicate metal oxide semiconductor capacitors", Appl. Phys. Lett., vol. 93, pp. 153505-1–153505-3, OCT, 2008.

Agashe, J., and D. P. Arnold, "A study of scaling and geometry effects on the forces between cuboidal and cylindrical magnets using analytical force solutions", J. Phys. D: Appl. Phys., vol. 41, no. 10, pp. 105001-1–105001-9, MAY, 2008.

Wang, M., K. Ngo, and H. Xie, "SU8 Enhanced High Power Density MEMS Inductors", Proc. of the 34th Annual Conference of the IEEE Industrial Electronics Society (IECON’08), Orlando, FL, USA, Nov. 10-13, 2008.

Martin, D., K. Kadirvel, T. Nishida, and M. Sheplak, "A Surface Micromachined Capacitive Microphone for Aeroacoustic Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2008.

Sanchez, J. C., J. Principe, T. Nishida, R. Bashirullah, J. Harris, and J. Fortes, "Technology and Signal Processing for Brain-Machine Interfaces", IEEE Signal Processing Magazine, vol. 25, pp. 29-40, SEP, 2008.

Yang, X., S. Parthasarathy, Y. Sun, A. D. Koehler, T. Nishida, and S. Thompson, "Temperature dependence of enhanced hole mobility in uniaxial strained p-channel metal-oxide-semiconductor field-effect transistors and insight into the physical mechanisms", Appl. Phys. Lett., vol. 93, pp. 243503-1–243503-3, DEC, 2008.