Publications

Found 1228 results
Author [ Title(Desc)] Type Year
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
O
Gallas, Q., G. Wang, M. Papila, M. Sheplak, and L. Cattafesta, "Optimization of Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0635, Reno, NV, January, 2003.
Mathew, J., Q. Song, B. V. Sankar, M. Sheplak, and L. Cattafesta, "Optimized Design of Piezoelectric Flap Actuators for Active Flow Control", AIAA Journal, vol. 44, no. 12, pp. 2919-2928, SEP, 2006.
Nishida, T., and S. Thompson, "Oxide field and thickness dependence of trap generation in 9-30 nm dry and dry/wet/dry oxides", Journal of Applied Physics, vol. 69, pp. 3986-3994, DEC, 1991.
P
Pal, S., and H. Xie, "A parametric dynamic compact thermal model of an electrothermally actuated micromirror", Journal of Micromechanics and Microengineering, vol. 19, no. 6, pp. 065007, 2009.
Ravi, S., D. Horner, and S. Moghaddam, "Parametric Study of The Transport Properties of Wicking Micro-Pillar Arrays", ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, 2013.
Yu, D., J. Chung, and S. Moghaddam, "Parametric study of water vapor absorption into a constrained thin film of lithium bromide solution", International Journal of Heat and Mass Transfer, vol. 55, issue 21-22, pp. 5687 - 5695, Jan-10-2012.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Part-to-Part and Part-to-Substarte Magnetic Self-Assembly of Millimeter Scale Components with Angular Orientation", Tech. Dig. 22nd IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2009), Sorrento, Italy, pp. 669-672, January, 2009.
Palavicini, M., B. George, and L. Cattafesta, "Passive Flow Control over a Three-Dimensional Turret with a Flat Aperture", 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, AIAA, 07/2011.
Sells, J., V. Chandrasekharan, H. Zmuda, M. Sheplak, and D. P. Arnold, "Passive Wireless Direct Shear Stress Measurement", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 368-371, 06/2010.
Rogers, J. E., Y-K. Yoon, M. Sheplak, and J. W. Judy, "A Passive Wireless Microelectromechanical Pressure Sensor for Harsh Environments", Journal of Microelectromechanical Systems, vol. 27, issue 1, pp. 73 - 85, Jan-02-2018.
Wang, Y., R. Bowrothu, Y-K. Yoon, and D. P. Arnold, "Patterning of thick electroplated CoPt magnets using SU-8 micromoulds", Micro & Nano Letters, vol. 14, issue 14, pp. 1393 - 1396, Jun-12-2020, 2019.
Heymann, D., C. D. Meyer, N. Jankowski, and B. C. Morgan, "Performance Modeling of Thermoelectric Generators as a Function of System Thermal Management", PowerMEMS, Washington, DC, Technical Digest of the 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, 12/2009.
Oniku, O. D., B. Bowers, S. B. Shetye, N. Wang, and D. P. Arnold, "Permanent magnet microstructures using dry-pressed magnetic powders", Journal of Micromechanics and Microengineering, vol. 23, issue 7, pp. 075027, 07/2013.
Arnold, D. P., and N. Wang, "Permanent Magnets for MEMS", J. Microelectromech. Syst., vol. 18, no. 6, pp. 1255-1266, 12/2009.
Z. Fan, H., and D. J. Harrison, "Permeability of glucose and other neutral species through recast perfluorosulfonated ionomer films", Analytical Chemistry, vol. 64, pp. 1304-1311, SEP, 1992.
Xie, H., G. K. Fedder, Z. Pan, and W. Frey, "Phase and Vibration Analysis for a CMOS-MEMS Gyroscope", Proc. of the International Conference on Micro and Nano Systems, Kunming, China, 2002.
Xie, H., G. K. Fedder, Y. Pan, and W. Frey, "Phase and Vibration Analysis for a CMOS-MEMS Gyroscope", International Journal of Nonlinear Sciences and Numerical Simulation, vol. 3, no. 3-4, 2002.
Rosenberg, K. T., S. Duvvuri, M. Luhar, B. J. McKeon, C. Barnard, B. Freidkes, J. Meloy, and M. Sheplak, "Phase relationships between velocity, wall pressure, and wall shear stress in a forced turbulent boundary layer", 46th AIAA Fluid Dynamics Conference, Washington, D.C.Reston, Virginia, American Institute of Aeronautics and Astronautics, 2016.
Li, X., E. Larsson, M. Sheplak, and J. Li, "Phase-Shift Based Time-Delay Estimators for Proximity Acoustic Sensors", IEEE Journal of Oceanic Engineering, vol. 27, no. 1, pp. 47-56, JUL, 2002.
Ghatge, M., G. Walters, T. Nishida, and R. Tabrizian, "Phononic detection of morphological phase transition in atomic-layered Hafnium-Zirconium-Oxide", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, Taiwan, IEEE, 2017.
Guo, H., C. Song, H. Xie, and L. Xi, "Photoacoustic endomicroscopy based on a MEMS scanning mirror", Optics Letters, vol. 42, issue 22, pp. 4615, Jan-01-2017.
Liu, T., L. Cattafesta, R. Radeztsky, and A. Burner, "Photogrammetry Applied to Wind-Tunnel Testing", AIAA Journal, vol. 38, no. 6, pp. 964-971, JUN, 2000.
Nishida, T., and C-T. Sah, "A physically based mobility model for MOSFET numerical simulation", IEEE Trans. Electron Devices, vol. 34, no. 2, pp. 310-320, FEB, 1987.
Peng, C., S. Ravi, V. K. Patel, A. M. Momen, and S. Moghaddam, "Physics of direct-contact ultrasonic cloth drying process", Energy, vol. 125, pp. 498 - 508, Feb-27-2017.
Peng, C., and S. Moghaddam, "Physics of direct-contact ultrasonic cloth drying process", International Mechanical Engineering Congress & Exposition (IMECE), Tampa, FL, 2017.