Publications

Found 249 results
Author Title [ Type(Desc)] Year
Filters: Author is David P. Arnold  [Clear All Filters]
Conference Paper
Carroll, R. E., J. A. Little, B. P. Mann, and D. P. Arnold, "Demonstration of tunable energy propagation using magneto-mechanical oscillator arrays", 2017 IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), Las Vegas, NV, USA, IEEE, 2017.
Masilamani, S., I. Boniche, C. D. Meyer, R. Durscher, and D. P. Arnold, "Design of a tubular microfabricated power generation system for hot exhaust streams", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Germany, pp. 249-252, November, 2007.
Williams, M. D., J. Zito, J. Agashe, A. Sopeju, and D. P. Arnold, "Design of an Electrodynamically Actuated Microvalve Using COMSOL Multiphysics and MATLAB", COMSOL Conference, Hannover, Germany, November, 2008.
Agashe, J., D. P. Arnold, and L. Cattafesta, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2009.
Smith, S. E., M. A. Halim, A. A. Rendon-Hernandez, and D. P. Arnold, "Dual-Transduction Electromechanical Receiver for Near-Field Wireless Power Transmission", 2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS)2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS), Gainesville, FL, USA, IEEE, 2021.
Oniku, O. D., B. Qi, and D. P. Arnold, "Effect of current density on electroplated CoPt thick films", TRANSDUCERS 2015 - 2015 18th International Solid-State Sensors, Actuators and Microsystems Conference2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, AK, USA, IEEE, pp. 596 - 601, 2015.
Chandrasekharan, V., J. Sells, D. P. Arnold, and M. Sheplak, "Effect of dynamic pressure on direct shear stress sensor design", 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-004, 01/2010.
Smith, C. S., K. Sondhi, H. Z. Fan, T. Nishida, and D. P. Arnold, "Effect of Mechanical Cycling on the Magnetic Properties of Permalloy Films Electroplated on Stretchable Substrates", 2019 IEEE International Flexible Electronics Technology Conference (IFETC)2019 IEEE International Flexible Electronics Technology Conference (IFETC), Vancouver, BC, Canada, IEEE, 2019.
Halim, M. A., A. A. Rendon-Hernandez, and D. P. Arnold, "An Electrodynamic Wireless Power Receiver ‘Chip’ for Wearables and Bio-implants", 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW)2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Seoul, Korea (South), IEEE, 2020.
McEachern, K. M., and D. P. Arnold, "Electrodynamic Wireless Power Transmission to a Torsional Receiver", Journal of Physics: Conference Series, vol. 476, London, UK, IOP Publishing, pp. 012004, 12/2013.
Garraud, A., J. D. Jimenez, N. Garraud, and D. P. Arnold, "Electrodynamic Wireless Power Transmission to Rotating Magnet Receivers", Tech. Dig. 14th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2014), Awaji, Japan, 11/2014.
Challa, V. R., D. P. Arnold, and J. Oscar Mur-Miranda, "Electrodynamic wireless power transmission using low-frequency fields", 2nd Int. Workshop Wireless Energy Transport and Harvesting, Leuven, Belgium, 05/2012.
Je, S. - S., N. Wang, H. C. Brown, D. P. Arnold, and J. Chae, "An electromagnetically actuated microspeaker with fully-integrated wax-bonded Nd–Fe–B micromagnets for hearing aid applications", 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, 06/2009.
Zhang, Y., and D. P. Arnold, "Electromechanical inductors for power converter applications", 10th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2010), Leuven, Belgium, pp. 131-134, 12/2010.
Halim, M. A., S. E. Smith, A. A. Rendon-Hernandez, and D. P. Arnold, "Electromechanical Modeling and Experimental Validation of a Dual-Transduction Electrodynamic Wireless Power Receiver", Transducers-2021, Jun-21, 2021.
Meloy, J., J. Sells, V. Chandrasekharan, J. Griffin, L. Cattafesta, D. P. Arnold, and M. Sheplak, "Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications", Hilton Head 2012, Hilton Head Island, SC, 06/2012.
Zito, J., D. P. Arnold, R. Durscher, and S. Roy, "Exploration of ceramic dielectrics for microscale dielectric barrier discharge plasma actuators", 44th AIAA Plasmadynamics and Lasers Conf., pp. 23, 06/2013.
Zito, J., and D. P. Arnold, "Fabrication and Electrical Characterization of Microscale Dielectric Barrier Discharge Devices", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head), Hilton Head, SC, pp. 238-241, 06/2010.
Velez, C., I. Torres-Díaz, L. Maldonado-Camargo, C. Rinaldi, and D. P. Arnold, "Fabrication of magnetic microstructures by in situ crosslinking of magnetically assembled nanoparticles", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2014), Hilton Head, SC, pp. 331-334, 06/2014.
Velez, C., I. Torres-Díaz, L. Maldonado-Camargo, C. Rinaldi, and D. P. Arnold, "Fabrication of patterned magnetic microstructures using magnetically assembled nanoparticles", 2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS)2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS), Estoril, Portugal, IEEE, pp. 964 - 967, 2015.
Qi, B., and D. P. Arnold, "Fabrication of size-tunable monodisperse Nd2Fe14B@CoFe2 nanocomplexes", 23rd Intl. Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM 2014), Annapolis, MD, 08/2014.
Wang, N., and D. P. Arnold, "Fully batch-fabricated MEMS magnetic vibrational energy harvesters", Tech. Dig. 9th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2009), Washington, DC, December, 2009.
Rao, Y., S. Cheng, and D. P. Arnold, "A fully self-sufficient energy harvesting system for human movements", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.
Ewing, J., Y. Wang, and D. P. Arnold, "High-current-density electrodeposition using pulsed and constant currents to produce thick CoPt magnetic films on silicon substrates", AIP Advances, Jan-05-2018.
Oniku, O. D., and D. P. Arnold, "High-energy-density permanent micromagnets formed from heterogeneous magnetic powder mixtures", 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), Paris, France, IEEE, pp. 436 - 439, 2012.