Publications

Wen, X., J. S. Andrew, and D. P. Arnold, "Exchange-coupled hard magnetic Fe-Co/CoPt nanocomposite films fabricated by electro-infiltration", AIP Advances, vol. 7, issue 5, pp. 056225, Jan-05-2017.

Cheng, S., R. D. Natarajan, and D. P. Arnold, "Experimental demonstration of an electrodynamic transformer", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4433-4436, 10/2011.

Chyczewski, S., S. Hwangbo, Y-K. Yoon, and D. P. Arnold, "Experimental demonstration of multi-watt wireless power transmission to ferrite-core receivers at 6.78 MHz", Wireless Power Transfer, vol. 6, issue 1, pp. 17 - 25, Jan-03-2019.

Burch, H. C., A. Garraud, M. F. Mitchell, R. C. Moore, and D. P. Arnold, "Experimental Generation of ELF Radio Signals Using a Rotating Magnet", IEEE Transactions on Antennas and Propagation, vol. 66, issue 11, pp. 6265 - 6272, Jan-11-2018.

Bernard, B. P., M. J. Mazzoleni, N. Garraud, D. P. Arnold, and B. Mann, "Experimental investigation of bifurcation induced bandgap reconfiguration", J. Appl. Phys., vol. 116, 2014.

Garraud, N., and D. P. Arnold, "Experimental investigation of magnetic anisotropy in spin vortex discs", Journal of Applied Physics, vol. 115, 2014.

Meloy, J., J. Sells, V. Chandrasekharan, J. Griffin, L. Cattafesta, D. P. Arnold, and M. Sheplak, "Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications", Hilton Head 2012, Hilton Head Island, SC, 06/2012.

Zito, J., D. P. Arnold, R. Durscher, and S. Roy, "Exploration of ceramic dielectrics for microscale dielectric barrier discharge plasma actuators", 44th AIAA Plasmadynamics and Lasers Conf., pp. 23, 06/2013.

Prestidge, D., R. Dhavalikar, A. C. Bohorquez, N. Garraud, M. Unni, A. Chiu-Lam, D. P. Arnold, and C. Rinaldi, "Exploring Iron Oxide Response under Biological Conditions using Magnetic Particle Spectrometry", 2016 Biomedical Engineering Society Annual Meeting, 2016.

Garraud, N., D. Alabi, S. Chyczewski, J. D. Varela, D. P. Arnold, and A. Garraud, "Extending the range of wireless power transmission for bio-implants and wearables", Journal of Physics: Conference Series, vol. 1052, pp. 012023, Jan-07-2018.

Garraud, N., D. Alabi, S. Chyczewski, J. D. Varela, D. P. Arnold, and A. Garraud, "Extending the range of wireless power transmission for bioimplants and wearables", 17th PowerMEMS, Kanazawa, Japan, 2017.

Yang, T-S., N. Wang, and D. P. Arnold, "Fabrication and characterization of parylene-bonded Nd–Fe–B powder micromagnets", J. Applied Physics, vol. 109, no. 071753, 3 pages, 04/2011.

Zito, J., and D. P. Arnold, "Fabrication and Electrical Characterization of Microscale Dielectric Barrier Discharge Devices", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head), Hilton Head, SC, pp. 238-241, 06/2010.

Sawant, S. G., N. Wang, M. S. Hanna, C. R. Taylor, and D. P. Arnold, "Fabrication, Characterization, and Modeling of Fully-Batch-Fabricated Piston-Type Electrodynamic Microactuators", Journal of Microelectromechanical Systems, vol. 23, no. 1, pp. 220-229, 2013, 2014.

Velez, C., I. Torres-Díaz, L. Maldonado-Camargo, C. Rinaldi, and D. P. Arnold, "Fabrication of magnetic microstructures by in situ crosslinking of magnetically assembled nanoparticles", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2014), Hilton Head, SC, pp. 331-334, 06/2014.

Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, 2009.

Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, pp. 157-190, 2009.

Velez, C., I. Torres-Díaz, L. Maldonado-Camargo, C. Rinaldi, and D. P. Arnold, "Fabrication of patterned magnetic microstructures using magnetically assembled nanoparticles", 2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS)2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS), Estoril, Portugal, IEEE, pp. 964 - 967, 2015.

Qi, B., and D. P. Arnold, "Fabrication of size-tunable monodisperse Nd2Fe14B@CoFe2 nanocomplexes", 23rd Intl. Workshop on Rare Earth and Future Permanent Magnets and Their Applications (REPM 2014), Annapolis, MD, 08/2014.

Sondhi, K., N. Garraud, D. Alabi, D. P. Arnold, A. Garraud, S. G. R. Avuthu, Z. H. Fan, and T. Nishida, "Flexible screen-printed coils for wireless power transfer using low-frequency magnetic fields", Journal of Micromechanics and Microengineering, vol. 29, issue 8, pp. 084006, Jan-08-2019.

Zito, J., R. Durscher, J. Soni, S. Roy, and D. P. Arnold, "Flow and force inducement using micron size dielectric barrier discharge actuators", Appl. Phys. Lett., vol. 100, 05/2012.

Taylor, A. P., C. Velez Cuervo, D. P. Arnold, and L. Fernando Velasquez-Garcia, "Fully 3D-Printed, Monolithic, Mini Magnetic Actuators for Low-Cost, Compact Systems", Journal of Microelectromechanical Systems, vol. 28, issue 3, pp. 481 - 493, Jan-06-2019.

Wang, N., and D. P. Arnold, "Fully batch-fabricated MEMS magnetic vibrational energy harvesters", Tech. Dig. 9th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2009), Washington, DC, December, 2009.

Rao, Y., S. Cheng, and D. P. Arnold, "A fully self-sufficient energy harvesting system for human movements", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Herrault, F., D. P. Arnold, I. Zana, P. Galle, and M. G. Allen, "High temperature operation of multi-watt, axial-flux, permanent-magnet microgenerators", Sensors & Actuators A, vol. 148, pp. 299-305, NOV, 2008.