Publications

Found 1228 results
Author Title Type [ Year(Desc)]
2004
Gallas, Q., R. Holman, R. Raju, R. Mittal, M. Sheplak, and L. Cattafesta, "Low Dimensional Modeling of Zero-Net Mass Flux Actuators", 2nd AIAA Flow Control Conference, AIAA Paper 2004-2413, Portland, OR, June, 2004.
Wu, J., G. K. Fedder, and L.R. Carley, "A low-noise low-offset capacitive sensing amplifier for a 50-/spl mu/g//spl radic/Hz monolithic CMOS MEMS accelerometer", IEEE Journal of Solid-State Circuits, vol. 39, issue 5, pp. 722 - 730, 05/2004.
Fang, D., and H. Xie, "A Low-Power Low-Noise Capacitive Sensing Amplifier for Integrated CMOS-MEMS Inertial Sensors", The IASTED International Conference on Circuits, Signals, and Systems, Clearwater Beach, FL, November, 2004.
Fredrickson, C. K., and H. Z. Fan, "Macro-to-Micro Interface for Microfluidic Devices", Lab on a Chip, vol. 4, no. 6, pp. 526-533, SEP, 2004.
Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines embedded in fusion-bonded silicon", Tech. Dig. Solid-State Sensor, Actuator, and MicrosystemsWorkshop (Hilton Head 2004), pp. 129-132, June, 2004.
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
Kegerise, M., E. Spina, S. Garg, and L. Cattafesta, "Mode-Switching and Nonlinear Effects in Compressible Flow Over a Cavity", Physics of Fluids, vol. 16, no. 3, pp. 678-687, MAR, 2004.
Horowitz, S., T-A. Chen, L. Cattafesta, M. Sheplak, T. Nishida, and V. Chandrasekaran, "Optical Flow Sensor Using Geometric Moire Interferometry", 34th International Conference on Environmental Systems, SAE Paper 2004-01-2267, Colorado Springs, CO, July, 2004.
Jacobson, S., S. Das, N. Savoulides, J. Steyn, J. H. Lang, H. Li, C. Livermore, M. Schmidt, C. Teo, S. Umans, et al., "Progress toward a microfabricated gas turbine generator for soldier portable power applications", Proc. 24th Army Science Conf., Orlando, FL, November, 2004.
Kegerise, M., R. Cabell, and L. Cattafesta, "Real-Time Adaptive Control of Flow-Induced Cavity Tones", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0572, January, 2004.
Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
Qu, H., D. Fang, and H. Xie, "A Single-crystal Silicon 3-axis CMOS-MEMS Accelerometer", IEEE Sensors, 2004, Vienna, Austria, IEEE, pp. 661 - 664, 10/2004.
Sadat, A., Y. Liu, J. Yuan, and H. Xie, "Soft breakdown effects on MOS switch and passive mixer", 2004 IEEE International Reliability Physics Symposium.2004 IEEE International Reliability Physics Symposium. Proceedings, Phoenix, AZ, USA, IEEE, pp. 653 - 654, 04/2004.
Taylor, R., F. Liu, S. Horowitz, K. Ngo, T. Nishida, L. Cattafesta, and M. Sheplak, "Technology Development for Electromechanical Acoustic Liners", Active 04 Paper a04-093, Williamsburg, VA, September, 2004.
Jain, A., A. Kopa, Y. Pan, G. K. Fedder, and H. Xie, "A Two-Axis Electrothermal Micromirror for Endoscopic Optical Coherence Tomography", IEEE Journal of Selected Topics in Quantum Electronics, vol. 10, issue 3, pp. 636 - 642, 05/2004.
Gurav, S., A. Kasyap V.S., M. Sheplak, L. Cattafesta, R. T. Haftka, J. Goosen, and F. Van Keulen, "Uncertainty-based Design Optimization of a Micro Piezoelectric Composite Energy Reclamation Device", 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York, September, 2004.
Arnold, D. P., I. Zana, F. Cros, and M. G. Allen, "Vertically-laminated magnetic cores by electroplating Ni-Fe into micromachined Si", IEEE Trans. Magn., vol. 40, no. 4, pp. 3060-3062, JUL, 2004.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Wafer-Bonded, Floating Element Shear-Stress Sensor", Solid State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, pp. 13-18, June, 2004.
Wang, Y., J. Li, P. Stoica, M. Sheplak, and T. Nishida, "Wideband RELAX and Wideband CLEAN for Aeroacoustic Imaging", J. Acoust. Soc. Am., vol. 115, no. 2, pp. 757-767, MAR, 2004.
2005
Todd, S., A. Jain, H. Qu, and H. Xie, "A 3-D Micromirror Utilizing Inverting-Series-Connected Electrothermal Bimorph Actuators for Piston and Tilt Motion", 2005 IEEE/LEOS International Conference on Optical MEMS and Their Applications, Oulu, Finland, IEEE, August, 2005.
Arnold, D. P., I. Zana, and M. G. Allen, "Analysis and optimization of vertically oriented, throughwafer, laminated magnetic cores in silicon", J. Micromech. Microeng, vol. 15, no. 5, pp. 971-977, MAY, 2005.
Todd, S., and H. Xie, "An analytical electrothermal model of a 1D electrothermal MEMS micromirror", Smart Structures, Devices, and Systems IIProceedings of SPIE, vol. 5649, Sydney, Australia, SPIE, pp. 344 - 353, 2005.
Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.
Lu, C-K., H. Qu, H. Xie, and D. J. Young, "CMOS MEMS Accelerometer for Long-Term In Vivo Real-Time Small Animal Biological Monitoring", IEEE Sensors, 2005, Irvine, CA, IEEE, pp. 1377 - 1380, 10/2005.