Publications

Found 1228 results
Author Title [ Type(Asc)] Year
Journal Article
Herrault, F., D. P. Arnold, I. Zana, P. Galle, and M. G. Allen, "High temperature operation of multi-watt, axial-flux, permanent-magnet microgenerators", Sensors & Actuators A, vol. 148, pp. 299-305, NOV, 2008.
Fazeli, A., M. Mortazavi, and S. Moghaddam, "Hierarchical biphilic micro/nanostructures for a new generation phase-change heat sink", Applied Thermal Engineering, vol. 78, pp. 380 - 386, Jan-03-2015.
Liu, J., D. Martin, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Harmonic Balance Nonlinear Identification of a capacitive dual-backplate MEMS microphone", J. Microelectromechanical Systems, vol. 17, no. 3, pp. 698-708, JUN, 2008.
Yang, H., L. Xi, S. Samuelson, H. Xie, L. Yang, and H. Jiang, "Handheld miniature probe integrating diffuse optical tomography with photoacoustic imaging through a MEMS scanning mirror", Biomedical Optics Express, vol. 4, issue 3, pp. 427, 2013.
Taylor, A. P., C. Velez Cuervo, D. P. Arnold, and L. Fernando Velasquez-Garcia, "Fully 3D-Printed, Monolithic, Mini Magnetic Actuators for Low-Cost, Compact Systems", Journal of Microelectromechanical Systems, vol. 28, issue 3, pp. 481 - 493, Jan-06-2019.
Halim, M. A., H. M. Kabir, H. Cho, and J. Yeong Park, "A Frequency Up-Converted Hybrid Energy Harvester Using Transverse Impact-Driven Piezoelectric Bimorph for Human-Limb Motion", Micromachines, vol. 10, issue 10, pp. 701, Jan-10-2019.
Wang, W., J. Chen, A. Zivkovic, and H. Xie, "A Fourier Transform Spectrometer Based on an Electrothermal MEMS Mirror with Improved Linear Scan Range", Sensors, vol. 16, issue 10, pp. 1611, Jan-10-2016.
Wang, D., H. Liu, J. Zhang, Q. Chen, W. Wang, X. Zhang, and H. Xie, "Fourier transform infrared spectrometer based on an electrothermal MEMS mirror", Applied Optics, vol. 57, issue 21, pp. 5956, Jan-01-2018.
Holman, R., Y. Utturkar, R. Mittal, B. Smith, and L. Cattafesta, "Formation Criterion for Synthetic Jets", AIAA Journal, vol. 43, issue 10, no. 10, pp. 2110-2116, OCT, 2005.
Freidkes, B., D. A. Mills, W. C. Patterson, P. M. Fournier, and M. Sheplak, "A Flush-Mounted Dual-Axis Wall Shear Stress Sensor", Journal of Microelectromechanical Systems, pp. 1 - 7, Jan-01-2020.
Zito, J., R. Durscher, J. Soni, S. Roy, and D. P. Arnold, "Flow and force inducement using micron size dielectric barrier discharge actuators", Appl. Phys. Lett., vol. 100, 05/2012.
Sondhi, K., N. Garraud, D. Alabi, D. P. Arnold, A. Garraud, S. G. R. Avuthu, Z. H. Fan, and T. Nishida, "Flexible screen-printed coils for wireless power transfer using low-frequency magnetic fields", Journal of Micromechanics and Microengineering, vol. 29, issue 8, pp. 084006, Jan-08-2019.
DelBello, S., P. Dopico, W. Mihalko, T. Brolin, F. Azar, and T. W. Throckmorton, "First Place Award: A quantitative analysis of the effect of glenoid bone volume on baseplate failure in reverse total shoulder arthroplasty in patients with inflammatory arthritis: a retrospective case control study", Current Orthopaedic Practice, vol. 31, issue 4, pp. 327 - 329, Jan-01-2020.
Ramasubramanian, V. Suganthan, M. S. Sundaram, R. Thomas, V. S. Ramesh, R. B. Pai, M. Hazarika, S. Mohammed A. Khader, R. G. Poojary, H. Girish, and V. Seth Crasto, "Finite Element Analysis of Cornea and Lid Wiper during Blink, with and without Contact Lens", Journal of Ophthalmology, vol. 2022, pp. 1 - 13, May-05-2023, 2022.
Dhavalikar, R., L. Maldonado-Camargo, N. Garraud, and C. Rinaldi, "Ferrohydrodynamic modeling of magnetic nanoparticle harmonic spectra for magnetic particle imaging", Journal of Applied Physics, vol. 118, issue 17, pp. 173906, Jul-11-2015.
Lomenzo, P. D., Q. Takmeel, C. M. Fancher, C. Zhou, N. G. Rudawski, S. Moghaddam, J. L. Jones, and T. Nishida, "Ferroelectric Si-Doped HfO2 Device Properties on Highly Doped Germanium", IEEE Electron Device Letters, vol. 36, issue 8, pp. 766 - 768, Jan-08-2015.
Zhang, X., L. Zhou, and H. Xie, "A Fast, Large-Stroke Electrothermal MEMS Mirror Based on Cu/W Bimorph", Micromachines, vol. 6, issue 12, pp. 1876 - 1889, 12/2015.
Z. Fan, H., R. Khnouf, and B. D. Chapman, "Fabrication optimization of a miniaturized array device for cell-free protein synthesis", ELECTROPHORESIS, vol. 32, issue 22, pp. 3101 - 3107, 11/2011.
Pal, S., and H. Xie, "Fabrication of robust electrothermal MEMS devices using aluminum–tungsten bimorphs and polyimide thermal isolation", Journal of Micromechanics and Microengineering, vol. 22, issue 11, pp. 115036, 11/2012.
Mei, Q., Z. Xia, F. Xu, S. A. Soper, and H. Z. Fan, "Fabrication of Microfluidic Reactors and Mixing Studies for Luciferase Detection", Analytical Chemistry, vol. 80, issue 15, pp. 6045 - 6050, 08/2008.
Sawant, S. G., N. Wang, M. S. Hanna, C. R. Taylor, and D. P. Arnold, "Fabrication, Characterization, and Modeling of Fully-Batch-Fabricated Piston-Type Electrodynamic Microactuators", Journal of Microelectromechanical Systems, vol. 23, no. 1, pp. 220-229, 2013, 2014.
Xie, H., and G. K. Fedder, "Fabrication, characterization, and analysis of a DRIE CMOS-MEMS gyroscope", IEEE Sensors Journal, vol. 3, issue 5, pp. 622 - 631, 10/2003.
Jiang, X., and H. Z. Fan, "Fabrication and Operation of Paper-Based Analytical Devices", Annual Review of Analytical Chemistry, vol. 9, issue 1, pp. 203 - 222, Dec-06-2016.
Yang, T-S., N. Wang, and D. P. Arnold, "Fabrication and characterization of parylene-bonded Nd–Fe–B powder micromagnets", J. Applied Physics, vol. 109, no. 071753, 3 pages, 04/2011.
Shukla, S., K. Tae Kim, A. Baev, Y.K. Yoon, N. Litchinitser, and P. N. Prasad, "Fabrication and Characterization of Gold-Polymer Nanocomposite Plasmonic Nanoarrays in a Porous Alumina Template", ACS Nano, vol. 4, 2010.