Publications

Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "A MEMS Acoustic Energy Harvester", J. Micromech. Microeng., vol. 16, pp. S174-S181, SEP, 2006.

Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in square ducts", J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.

Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.

Fu, L., A. Jain, H. Xie, C. Cranfield, and M. Gu, "Nonlinear Optical Endoscopy based on a Double-clad Photonic Crystal Fiber and a MEMS Mirror", Optics Express, vol. 14, pp. 1027-1032, 02/2006.

Liu, F., S. Horowitz, L. Cattafesta, and M. Sheplak, "Optimization of an Electromechanical Helmholtz Resonator", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.

Mathew, J., Q. Song, B. V. Sankar, M. Sheplak, and L. Cattafesta, "Optimized Design of Piezoelectric Flap Actuators for Active Flow Control", AIAA Journal, vol. 44, no. 12, pp. 2919-2928, SEP, 2006.

Kadirvel, S., F. Liu, S. Horowitz, T. Nishida, K. Ngo, L. Cattafesta, and M. Sheplak, "A Self-Powered Wireless Active Acoustic Liner", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.

Sanchez, J. C., N. Alba, T. Nishida, C. Batich, and P. Carney, "Structural Modifications in Chronic Microwire Electrodes for Cortical Neuroprosthetics: A Case Study", IEEE Trans. Neural Systems and Rehab. Engr., vol. 14, no. 2, pp. 217-221, JUN, 2006.

Thompson, S., G-Y. Sun, Y. Choi, and T. Nishida, "Uniaxial Process Induced Strained Si: Extending the CMOS Roadmap", IEEE Trans. Electron Dev., vol. 53, pp. 1010-1020, MAY, 2006.

Nishida, T., J. Lin, K. Ngo, F. Ren, D. Norton, S. J. Pearton, L. Cattafesta, M. Sheplak, J. Jun, A. Kasyap V.S., et al., "Wireless Hydrogen Sensor Self-powered Using Ambient Vibration and Light", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-14644, November, 2006.

Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.

Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.

Xu, S., K. Ngo, T. Nishida, G-B. Chung, and A. Sharma, "Converter and Controller for Micro-Power Energy Harvesting", Proceedings of IEEE Applied Power Electronics Conference, pp. 226-230, November, 2005.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.

Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.

Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Dynamic calibration technique for thermal shear-stress sensors", Experiments in Fluids, vol. 38, pp. 56-65, JUL, 2005.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Dynamic calibration technique for thermal shear-stress sensors", Experiments in Fluids, vol. 38, pp. 56-65, JUL, 2005.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Dynamic calibration technique for thermal shear-stress sensors", Experiments in Fluids, vol. 38, pp. 56-65, JUL, 2005.

Chao, J., W. Shyy, S. Thakur, M. Sheplak, and R. Mei, "Effect of Conjugate Heat Transfer on MEMS-Based Thermal Shear Stress Sensor", Numerical Heat Transfer-A, vol. 48, no. 3, pp. 197-217, AUG, 2005.

Holman, R., Y. Utturkar, R. Mittal, B. Smith, and L. Cattafesta, "Formation Criterion for Synthetic Jets", AIAA Journal, vol. 43, issue 10, no. 10, pp. 2110-2116, OCT, 2005.

Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.