Publications

Found 32 results
Author Title Type [ Year(Asc)]
Filters: Author is Sheplak, Mark and First Letter Of Title is M  [Clear All Filters]
2017
Sheplak, M., "MEMS-Based acoustic sensors for fluid mechanics and aeroacoustics", The Journal of the Acoustical Society of America, vol. 141, issue 5, pp. 3721 - 3721, Jan-05-2017.
2012
Sawant, S. G., M. Oyarzun, M. Sheplak, L. Cattafesta, and D. P. Arnold, "Modeling of electrodynamic zero-net mass-flux actuators", AIAA Journal, vol. 50, no. 6, 06/2012.
Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", Journal of Applied Mechanics, vol. 79, no. 1, 01/2012.
2011
Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.
Griffin, B. A., V. Chandrasekaran, M. D. Williams, B. V. Sankar, and M. Sheplak, "Model for thermoelastic actuation of an axisymmetric isotropic circular plate via an internal harmonic heat source", International Journal of Solids and Structures, 02/2011.
2010
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A MEMS Direct Skin Friction Sensor", Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.
2009
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Metal-On-Silicon Differential Capacitive Shear Stress Sensor", Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.
Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", 2009 ASME International Mechanical Engineering Congress, Lake Buena Vista, FL, November, 2009.
2008
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.
2007
Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.
Guo, B., J. Li, H. Zmuda, and M. Sheplak, "Multifrequency Microwave-Induced Thermal Acoustic Imaging for Breast Cancer Detection", IEEE Trans. Bio. Eng., vol. 54, no. 11, pp. 2000-2010, NOV, 2007.
Liu, F., S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, "A multiple degree of freedom electromechanical Helmholtz resonator", J. Acoust. Soc. Am., vol. 122, no. 1, pp. 291-301, JUL, 2007.
2006
Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "A MEMS Acoustic Energy Harvester", J. Micromech. Microeng., vol. 16, pp. S174-S181, SEP, 2006.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in square ducts", J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.
Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.
2005
Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.
2004
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.