Publications

Paneri, A., and S. Moghaddam, "Proton and Methanol Transport Characteristics of Laminated Graphene Oxide Nanoplatelets", ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, Sapporo, Japan, 06/2013.

Pal, S., and H. Xie, "Analysis and Fabrication of Curved Multimorph Transducers that Undergo Bending and Twisting", IEEE/ASME Journal of Microelectromechanical Systems (accepted, In Press), 2012.

Peterson, B., F. Herrault, O. D. Oniku, Z. A. Kaufman, and D. P. Arnold, "Assessment of laser-induced damage in laser-micromachined rare-earth permanent magnets", IEEE Trans. Magn., vol. 48, no. 11, 2012.

Prasad, A., Q-S. Xue, V. Sankar, T. Nishida, G. Shaw, W. J. Streit, and J. C. Sanchez, "Comprehensive characterization and failure modes of tungsten microwire arrays in chronic neural implants", Journal of Neural Engineering, vol. 9, issue 5, no. 5, pp. 056015, 09/2012.

Prasad, A., Q-S. Xue, V. Sankar, T. Nishida, G. Shaw, W. J. Streit, and J. C. Sanchez, "Comprehensive characterization of tungsten microwires in chronic neurocortical implants", 34th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, San Diego, CA, Aug 28-Sep 1, 2012.

Pal, S., and H. Xie, "Fabrication of robust electrothermal MEMS devices using aluminum–tungsten bimorphs and polyimide thermal isolation", Journal of Micromechanics and Microengineering, vol. 22, issue 11, pp. 115036, 11/2012.

Paneri, A., G. Ehlert, H. Sodano, and S. Moghaddam, "Graphene-based Proton Exchange Membrane for Direct Methanol Fuel Cells (DMFCs)", Nanotech Conference and Expo 2012, Santa Clara, CA, 07/2012.

Peterson, B., W. C. Patterson, F. Herrault, D. P. Arnold, and M. G. Allen, "Laser-micromachined permanent magnet arrays with spatially alternating magnetic field distribution", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Peterson, B., W. C. Patterson, F. Herrault, D. P. Arnold, and M. G. Allen, "Laser-micromachined permanent magnet arrays with spatially alternating magnetic field distribution", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Liu, L., S. Pal, and H. Xie, "MEMS mirrors based on a curved concentric electrothermal actuator", Sensors and Actuators A: Physical (In Press), 2012.

Liu, L., S. Pal, and H. Xie, "MEMS mirrors based on a curved concentric electrothermal actuator", Sensors and Actuators A: Physical, 3/2012.

Pal, S., S. Samuelson, and H. Xie, "Novel mechanisms for millimeter range piston actuation of vertical micromirrors and microlenses", International Conference on Optical MEMS and Nanophotonics, Banff, Alberta, Canada, 2012.

Paprotny, I., A. Waterbury, V. R. Challa, Q. Xu, D. P. Arnold, S. Sanders, and P. K. Wright, "Piezoelectrodynamic gyrator: analysis, experiments, and applications to wireless power transfer", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Prasad, A., Q-S. Xue, V. Sankar, T. Nishida, G. Shaw, W. J. Streit, and J. C. Sanchez, "Predicting Microelectrode Array Functionality Using Biotic and Abiotic Metrics in Vivo", 34th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, San Diego, CA, Aug 28-Sep 1, 2012.

Phipps, A., and T. Nishida, "System Modeling of Piezoelectric Energy Harvesters", IEEE Trans. Power Electronics, vol. 27, issue 2, 2012.

Streit, W. J., Q-S. Xue, A. Prasad, V. Sankar, E. Knott, A. T. Dyer, J. R. Reynolds, T. Nishida, G. Shaw, and J. C. Sanchez, "Tissue, Electrical, and Material Responses in Electrode Failure", IEEE Pulse, vol. 3, issue 1, pp. 30 - 33, 01/2012.

Yang, S., F. Liu, M. Oyarzun, M. Palavicini, and L. Cattafesta, "Transfer Matrix Modeling of Synthetic Jet Actuators", Fluid Science and Technology, vol. 8, no. 2, 07/2012.

Yang, S., F. Liu, M. Oyarzun, M. Palavicini, and L. Cattafesta, "Transfer Matrix Modeling of Synthetic Jet Actuators", Fluid Science and Technology, vol. 8, no. 2, 07/2012.

Bernard, B. P., J. W. Peyser, B. Mann, and D. P. Arnold, "Using the mass ratio to induce band gaps in a 1D array of nonlinearly coupled oscillators", Proc. ASME 2012 Int. Design Engineering Tech. Conf. & Computers and Information in Eng. Conf. (IDETC/CIE 2012), Chicago, IL, ASME, 08/2012.

Pal, S., and H. Xie, "Analysis, simulation and fabrication of curved multimorphs that undergo bending and twisting", Sensors, 2011 IEEE, pp. 667-670, Oct, 2011.

Patrick, E., M. E. Orazem, J. C. Sanchez, and T. Nishida, "Corrosion of tungsten microelectrodes used in neural recording applications", J. Neuroscience Methods, vol. 198, pp. 14, 06/2011.

Prasad, A., V. Sankar, A. T. Dyer, E. Knott, Q-S. Xue, T. Nishida, J. R. Reynolds, G. Shaw, W. J. Streit, and J. C. Sanchez, "Coupling Biotic and Abiotic Metrics to Create a Testbed for Predicting Neural Electrode Performance", 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC'11) August 30 - September 3, 2011, Boston, MA, 08/2011.

Pal, S., and H. Xie, "A Curved Multimorph Based Electrothermal Micromirror with Large Scan Range and Low Drive Voltage", Sensors & Actuators: A. Physical, vol. 170, pp. pp. 156-163, 2011.

Pal, S., and H. Xie, "Design and Fabrication of 2D Fast Electrothermal Micromirrors with Large Scan Range and Small Center Shift", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.

Takahashi, H., F. Liu, M. Palavicini, M. Oyarzun, J. Griffin, L. Ukeiley, and L. Cattafesta, "Experimental Study of Adaptive Control of High-Speed Flow-Induced Cavity Oscillations", Journal of Fluid Science and Technology, vol. 6, no. 5, pp. 701-716, 07/2011.