Publications

Sawant, S. G., N. Wang, M. S. Hanna, C. R. Taylor, and D. P. Arnold, "Fabrication, Characterization, and Modeling of Fully-Batch-Fabricated Piston-Type Electrodynamic Microactuators", Journal of Microelectromechanical Systems, vol. 23, no. 1, pp. 220-229, 2013, 2014.

Oniku, O. D., B. Bowers, S. B. Shetye, N. Wang, and D. P. Arnold, "Permanent magnet microstructures using dry-pressed magnetic powders", Journal of Micromechanics and Microengineering, vol. 23, issue 7, pp. 075027, 07/2013.

Yang, T-S., N. Wang, and D. P. Arnold, "Fabrication and characterization of parylene-bonded Nd–Fe–B powder micromagnets", J. Applied Physics, vol. 109, no. 071753, 3 pages, 04/2011.

Yang, T-S., N. Wang, and D. P. Arnold, "Morphology and magnetic properties of electroplated Co-rich Co-Zn thin films", Microsystem Technologies, vol. 17, no. 1, pp. 85-91, 01/2011.

Wang, N., and D. P. Arnold, "Batch-fabricated electrodynamic microactuators with integrated micromagnets", IEEE Trans. Magn., vol. 46, no. 6, pp. 1798-1801, 06/2010.

Je, S. - S., N. Wang, H. C. Brown, D. P. Arnold, and J. Chae, "An electromagnetically actuated microspeaker with fully-integrated wax-bonded Nd–Fe–B micromagnets for hearing aid applications", 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, 06/2009.

Wang, N., and D. P. Arnold, "Fully batch-fabricated MEMS magnetic vibrational energy harvesters", Tech. Dig. 9th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2009), Washington, DC, December, 2009.

Arnold, D. P., and N. Wang, "Permanent Magnets for MEMS", J. Microelectromech. Syst., vol. 18, no. 6, pp. 1255-1266, 12/2009.

Wang, N., and D. P. Arnold, "Thick electroplated Co-rich Co–Pt micromagnet arrays for magnetic MEMS", IEEE Trans. Magn., vol. 44, no. 11, pp. 3969-3972, 11/2008.

Wang, N., B. Bowers, and D. P. Arnold, "Wax-bonded NdFeB micromagnets for microelectromechanical systems application", J. Applied Physics, vol. 103, pp. 07E109, 04/2008.

Cheng, S., N. Wang, and D. P. Arnold, "Modeling of magnetic vibrational energy harvesters using equivalent circuit representations", J. Micromech. Microeng., vol. 17, no. 11, pp. 2328-2335, NOV, 2007.

Cheng, S., N. Wang, and D. P. Arnold, "Optimization of magnetic vibrational energy harvesting systems using equivalent circuit representations", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2007), Freiburg, Germany, pp. 89-92, November, 2007.