Publications

Holman, R., Y. Utturkar, R. Mittal, B. Smith, and L. Cattafesta, "Formation Criterion for Synthetic Jets", AIAA Journal, vol. 43, issue 10, no. 10, pp. 2110-2116, OCT, 2005.

Wang, D., H. Liu, J. Zhang, Q. Chen, W. Wang, X. Zhang, and H. Xie, "Fourier transform infrared spectrometer based on an electrothermal MEMS mirror", Applied Optics, vol. 57, issue 21, pp. 5956, Jan-01-2018.

Wang, W., J. Chen, A. Zivkovic, and H. Xie, "A Fourier Transform Spectrometer Based on an Electrothermal MEMS Mirror with Improved Linear Scan Range", Sensors, vol. 16, issue 10, pp. 1611, Jan-10-2016.

Halim, M. A., H. M. Kabir, H. Cho, and J. Yeong Park, "A Frequency Up-Converted Hybrid Energy Harvester Using Transverse Impact-Driven Piezoelectric Bimorph for Human-Limb Motion", Micromachines, vol. 10, issue 10, pp. 701, Jan-10-2019.

Taylor, A. P., C. Velez Cuervo, D. P. Arnold, and L. Fernando Velasquez-Garcia, "Fully 3D-Printed, Monolithic, Mini Magnetic Actuators for Low-Cost, Compact Systems", Journal of Microelectromechanical Systems, vol. 28, issue 3, pp. 481 - 493, Jan-06-2019.

Yousuf, S. M. Enamul H., Y. Wang, N. G. Rudawski, and P. X. ‐L. Feng, "Graphene Trampoline Nanomechanical Resonators with Very High Quality Factors and Broad Dynamic Ranges", Advanced Functional Materials, vol. 35, issue 48, 2025.

Yang, H., L. Xi, S. Samuelson, H. Xie, L. Yang, and H. Jiang, "Handheld miniature probe integrating diffuse optical tomography with photoacoustic imaging through a MEMS scanning mirror", Biomedical Optics Express, vol. 4, issue 3, pp. 427, 2013.

Liu, J., D. Martin, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Harmonic Balance Nonlinear Identification of a capacitive dual-backplate MEMS microphone", J. Microelectromechanical Systems, vol. 17, no. 3, pp. 698-708, JUN, 2008.

Fazeli, A., M. Mortazavi, and S. Moghaddam, "Hierarchical biphilic micro/nanostructures for a new generation phase-change heat sink", Applied Thermal Engineering, vol. 78, pp. 380 - 386, Jan-03-2015.

Zheng, X-Q., T. Tharpe, S. M. Enamul H. Yousuf, N. G. Rudawski, P. X. - L. Feng, and R. Tabrizian, "High Quality Factors in Superlattice Ferroelectric Hf _0.5 Zr _0.5 O ₂ Nanoelectromechanical Resonators", ACS Applied Materials & Interfaces, vol. 14, issue 32, pp. 36807 - 36814, May-08-2023, 2022.

Herrault, F., D. P. Arnold, I. Zana, P. Galle, and M. G. Allen, "High temperature operation of multi-watt, axial-flux, permanent-magnet microgenerators", Sensors & Actuators A, vol. 148, pp. 299-305, NOV, 2008.

Ewing, J., Y. Wang, and D. P. Arnold, "High-current-density electrodeposition using pulsed and constant currents to produce thick CoPt magnetic films on silicon substrates", AIP Advances, vol. 8, issue 5, pp. 056711, Jan-05-2018.

Jia, K., S. Samuelson, and H. Xie, "High-Fill-Factor Micromirror Array With Hidden Bimorph Actuators and Tip–Tilt-Piston Capability", Journal of Microelectromechanical Systems, 2011.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "High-Inductance-Density, Air-Core, Power Inductors, and Transformers Designed for Operation at 100–500 MHz", IEEE Transactions on Magnetics, vol. 46, issue 6, pp. 2236 - 2239, 06/2010.

Lednicky, J., M. Pan, J. Loeb, H. Hsieh, A. Eiguren-Fernandez, S. Hering, H. Z. Fan, and C-Y. Wu, "Highly efficient collection of infectious pandemic influenza H1N1 virus (2009) through laminar-flow water based condensation", Aerosol Science and Technology, vol. 50, issue 7, pp. i - iv, Feb-07-2016.

Tang, H., G. J. Ehlert, Y. Lin, and H. A. Sodano, "Highly Efficient Synthesis of Graphene Nanocomposites", Nano Letters, vol. 12, no. 1, pp. 84-90, 11/2011.

Yousuf, S. M. Enamul H., M. Alam Sakib, and M. Zahurul Islam, "A High-Performance Plasmonic Nanosensor Based on an Elliptical Nanorod in an MIM Configuration", IEEE Sensors Journal, vol. 18, issue 15, pp. 6145 - 6153, Jan-08-2018.

Tabrizian, R., A. Daruwalla, and F. Ayazi, "High-Q energy trapping of temperature-stable shear waves with Lamé cross-sectional polarization in a single crystal silicon waveguide", Applied Physics Letters, vol. 108, issue 11, pp. 113503, 03/2016.

Li, J., V. Farm- Guoo Tseng, Z. Xiao, and H. Xie, "A High-Q In-Silicon Power Inductor Designed for Wafer-Level Integration of Compact DC–DC Converters", IEEE Transactions on Power Electronics, vol. 32, issue 5, pp. 3858 - 3867, Jul-07-2016, 2017.

Li, J., V. Tseng, Z. Xiao, and H. Xie, "A High-Q In-Silicon Power Inductor Designed for Wafer-Level Integration of Compact DC-DC Converters", IEEE Transactions on Power Electronics, pp. 1 - 1, 2016.

Bhanvadia, A. A., R. T. Farley, Y. Noh, and T. Nishida, "High-resolution stereolithography using a static liquid constrained interface", Communications Materials, vol. 2, issue 1, 2021.

Wang, H., Z. Chen, and H. Xie, "A High-SPL Piezoelectric MEMS Loud Speaker based on Thin Ceramic PZT", Sensors and Actuators A: Physical, pp. 112018, Jan-05-2020.

Castillo-Torres, K. Y., E. S. McLamore, and D. P. Arnold, "A High-Throughput Microfluidic Magnetic Separation (µFMS) Platform for Water Quality Monitoring", Micromachines, vol. 11, issue 1, pp. 16, Jan-01-2020.

Sun, G-Y., Y. Sun, T. Nishida, and S. Thompson, "Hole mobility in silicon inversion layers: Stress and surface orientation", Journal of Applied Physics, vol. 102, pp. 084501-1–084501-7, JAN, 2007.

Hsu, K-H., S-P. Fang, C-L. Lin, Y-S. Liao, Y.-K. Yoon, and A. Chauhan, "Hybrid Electrospun Polycaprolactone Mats Consisting of Nanofibers and Microbeads for Extended Release of Dexamethasone", Pharmaceutical Research, vol. 33, issue 6, pp. 1509 - 1516, Jan-06-2016.