Publications

Morrish, D., L. Wu, H. Xie, J. Reynolds, A. Boussioutas, and M. Gu, "Nonlinear Imaging by an Endoscope Probe Incorporating a Tip-Tilt-Piston Microelectromechanical System Mirror", Novel Techniques in Microscopy: Optical Society of America, pp. NWD1, 2009.

Morrish, D., L. Wu, H. Xie, J. Reynolds, A. Boussioutas, and M. Gu, "Nonlinear Imaging by an Endoscope Probe Incorporating a Tip-Tilt-Piston Microelectromechanical System Mirror", OSA Spring Optics & Photonics Congress,, Vancouver, Canada, April, 2009.

Siauw, W. Long, J-P. Bonnet, J. Tensi, and L. Cattafesta, "Physics of Separated Flow over a NACA 0015 Airfoil and Detection of Flow Separation", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-144, January, 2009.

Benard, N., E. Moreau, J. Griffin, and L. Cattafesta, "Plasma flow control - autonomous lift improvement by slope-seeking", 39th AIAA Fluid Dynamics Conference, AIAA Paper 2009-4182, San Antonio, TX, June, 2009.

McManamon, P. F., P. J. Bos, M. J. Escuti, J. Heikenfeld, S. Serati, H. Xie, and E. A. Watson, "A Review of Phased Array Steering for Narrow-Band Electrooptical Systems", Proceedings of the IEEE, vol. 97, issue 6, pp. 1078 - 1096, 06/2009.

Bowers, B., and D. P. Arnold, "Spherical, rolling magnet generators for passive energy harvesting from human motion", J. Micromech. Microeng., vol. 19, no. 9, pp. 094008, 09/2009.

Yardibi, T., C. Bahr, N. Zawodny, F. Liu, L. Cattafesta, and J. Li, "Uncertainty Analysis of the Standard Delay-and-Sum Beamformer and Array Calibration", 15th AIAA/CEAS Aeroacoustics Conference, Miami, FL, May, 2009.

Cattafesta, L., Y. Tian, and R. Mittal, The Aerodynamics of Heavy Vehicles II: Trucks, Buses, and Trains, Lecture Notes in Applied and Computational Mechanics, vol. 21: Springer, pp. 151-160, DEC, 2008.

Bahr, C., T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.

Min, M., W. LEE, T. Burks, J. Jordan, A. Schumann, J. Schueller, and H. Xie, "Design of a hyperspectral nitrogen sensing system for orange leaves", Computers and Electronics in Agriculture, vol. 63, issue 2, pp. 215 - 226, 10/2008.

Sheplak, M., L. Cattafesta, and Y. Tian, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 67-73, 2008.

Murray, N., Q. Song, L. Cattafesta, and L. Ukeiley, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 183-190, 2008.

Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.

Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.

Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS Shear Stress Sensor for Turbulence Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-269, Reno, Nevada, January, 2008.

Morrish, D., L. Wu, H. Xie, A. Boussioutas, and M. Gu, "Nonlinear imaging of tissue by an endoscope probe incorporating a 3D scanning MEMS mirror", Australian Institute of Physics 18th Annual Conference, Adelaide, Australia, 2008.

Boniche, I., B. C. Morgan, P. Taylor, C. D. Meyer, and D. P. Arnold, "Process development and material characterization of polycrystalline Bi2Te3, PbTe, and PbSnSeTe thin films on silicon for millimeter-scale thermoelectric generators", J. Vacuum Sci. Tech. A, vol. 26, no. 4, pp. 739-744, JUL, 2008.

Bowers, B., and D. P. Arnold, "Spherical Magnetic Generators for Bio-Motional Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (Power MEMS 2008), Sendai, Japan, pp. 281-284, November, 2008.

Sanchez, J. C., J. Principe, T. Nishida, R. Bashirullah, J. Harris, and J. Fortes, "Technology and Signal Processing for Brain-Machine Interfaces", IEEE Signal Processing Magazine, vol. 25, pp. 29-40, SEP, 2008.

Wang, N., B. Bowers, and D. P. Arnold, "Wax-bonded NdFeB micromagnets for microelectromechanical systems application", J. Applied Physics, vol. 103, pp. 07E109, 04/2008.

Wang, M., I. Batarseh, K. Ngo, and H. Xie, "Design and Fabrication of Integrated Power Inductor Based on Silicon Molding Technology", Proc. of the 38th Annual IEEE Power Electronics Specialists Conference (PESC'07), Orlando, FL, IEEE, 06/2007.

Masilamani, S., I. Boniche, C. D. Meyer, R. Durscher, and D. P. Arnold, "Design of a tubular microfabricated power generation system for hot exhaust streams", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Germany, pp. 249-252, November, 2007.

Bashirullah, R., J. Harris, J. C. Sanchez, T. Nishida, and J. Principe, "Florida Wireless Implantable Recording Electrodes (FWIRE) for Brain Machine Interfaces", IEEE International Symposium on Circuits and Systems (ISCAS 2007), 2084 , June, 2007.

Bowers, B., J. Agashe, and D. P. Arnold, "A method to form bonded micromagnets embedded in silicon", Proc. 14th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 07), vol. 2, pp. 1581-1584, June, 2007.

Patrick, E., M. Ordonez, C. Batich, J. C. Sanchez, and T. Nishida, "Design and Fabrication of Flexible Substrate Microelectrode Array for Brain Machine Interfaces", IEEE EMBS, New York, NY, August, 2006.