David Arnold

Zito, J., D. P. Arnold, T. Houba, J. Soni, R. Durscher, and S. Roy, "Microscale dielectric barrier discharge plasma actuators: performance characterization and numerical comparison", 43rd AIAA Plasmadynamics and Lasers Conf., New Orleans, LA, AIAA, 06/2012.

Sawant, S. G., M. Oyarzun, M. Sheplak, L. Cattafesta, and D. P. Arnold, "Modeling of electrodynamic zero-net mass-flux actuators", AIAA Journal, vol. 50, no. 6, 06/2012.

Paprotny, I., A. Waterbury, V. R. Challa, Q. Xu, D. P. Arnold, S. Sanders, and P. K. Wright, "Piezoelectrodynamic gyrator: analysis, experiments, and applications to wireless power transfer", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Ultra-miniaturized power converter modules using micromachined copper scaffolds", Hilton Head 2012, Hilton Head Island, SC, 06/2012.

Bernard, B. P., J. W. Peyser, B. Mann, and D. P. Arnold, "Using the mass ratio to induce band gaps in a 1D array of nonlinearly coupled oscillators", Proc. ASME 2012 Int. Design Engineering Tech. Conf. & Computers and Information in Eng. Conf. (IDETC/CIE 2012), Chicago, IL, ASME, 08/2012.

Challa, V. R., J. Oscar Mur-Miranda, and D. P. Arnold, "Wireless power transmission to an electromechanical receiver using low-frequency magnetic fields", Smart Materials and Structures, vol. 21, issue 11, pp. 115017, 11/2012.

Cheng, S., Y. Jin, Y. Rao, and D. P. Arnold, "An active voltage doubling ac/dc converter for low-voltage energy harvesting applications", IEEE Transactions on Power Electronics, vol. 26, no. 8, pp. 2258-2265, 08/2011.

Arnold, D. P., Y.K. Yoon, and M. Saumer, "Additive Processes for Metals", MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.

Cheng, S., R. D. Natarajan, and D. P. Arnold, "Experimental demonstration of an electrodynamic transformer", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4433-4436, 10/2011.

Yang, T-S., N. Wang, and D. P. Arnold, "Fabrication and characterization of parylene-bonded Nd–Fe–B powder micromagnets", J. Applied Physics, vol. 109, no. 071753, 3 pages, 04/2011.

Rao, Y., and D. P. Arnold, "Input-powered energy harvesting interface circuits with zero standby power", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1992-1999, 03/2011.

Rao, Y., and D. P. Arnold, "An input-powered vibrational energy harvesting interface circuit with zero standby power", IEEE Trans. Power Electron., vol. 46, no. 12, pp. 3524-3533, 12/2011.

Meyer, C. D., S. S. Bedair, L. Xue, C. M. Dougherty, R. Bashirullah, D. P. Arnold, and B. C. Morgan, "Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process", 220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.

Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductor with high inductance density via mechanical energy storage", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 181-184, 11/2011.

Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.

Bowers, B., O. D. Oniku, and D. P. Arnold, "Microfabrication and process integration of powder-based permanent magnets", Technologies for Future Micro-Nano Manufacturing, Napa, California, August 2011.

Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.

Yang, T-S., N. Wang, and D. P. Arnold, "Morphology and magnetic properties of electroplated Co-rich Co-Zn thin films", Microsystem Technologies, vol. 17, no. 1, pp. 85-91, 01/2011.

Cheng, S., and D. P. Arnold, "Optimization of Permanent Magnet Assemblies Using Genetic Algorithms", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4104-4107, 11/2011.

Cheng, S., and D. P. Arnold, "A resonant DC/AC inverter using an electromechanical device", PowerMEMS 2011, Seoul, Korea, 11/2011.

Xue, L., C. D. Meyer, D. P. Arnold, and R. Bashirullah, "Towards miniature step-up power converters for mobile microsystems", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1451-1455, 03/2011.

Cheng, S., R. Sathe, R. D. Natarajan, and D. P. Arnold, "A Voltage-Multiplying Self-Powered AC/DC Converter with 0.35 V Minimum Input Voltage for Energy Harvesting Applications", IEEE Transactions on Power Electronics, vol. 26, no. 9, pp. 2542-2549, 09/2011.

Cheng, S., R. Sathe, R. D. Natarajan, and D. P. Arnold, "A Voltage-Multiplying Self-Powered AC/DC Converter with 0.35 V Minimum Input Voltage for Energy Harvesting Applications", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1311-1318, 03/2011.

Challa, V. R., V. Divakar, J. Oscar Mur-Miranda, and D. P. Arnold, "Wireless power transmission to an electrodynamic energy harvester using low-frequency magnetic fields", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 335-338, 11/2011.