Publications
"An ultra-fast electrothermal micromirror with bimorph actuators made of copper/tungsten", 2017 International Conference on Optical MEMS and Nanophotonics (OMN)2017 International Conference on Optical MEMS and Nanophotonics (OMN), Santa Fe, NM, USA, IEEE, 2017.
, "Ultra-High Q-factor Through Fused-silica Via (TFV) Integrated 3D Solenoid Inductor for Millimeter Wave Applications", 2021 IEEE 71st Electronic Components and Technology Conference (ECTC)2021 IEEE 71st Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, IEEE, 2021.
, "Ultra-High Q-factor Through Fused-silica Via (TFV) Integrated 3D Solenoid Inductor for Millimeter Wave Applications", 2021 IEEE 71st Electronic Components and Technology Conference, 2021.
, "Ultra-Low-Power Current Sensor Utilizing Magnetoelectric Nanowires", IEEE Sensors Journal, vol. 20, issue 10, pp. 5139 - 5145, Mar-05-2021, 2020.
, "Ultralow-voltage electrothermal MEMS based fiber-optic scanning probe for forward-viewing endoscopic OCT", Optics Letters, vol. 44, issue 9, pp. 2232, Jan-01-2019.
, "Ultra-miniaturized power converter modules using micromachined copper scaffolds", Hilton Head 2012, Hilton Head Island, SC, 06/2012.
, "Ultra-Thick Electroplated CoPt Magnets for MEMS", Journal of Microelectromechanical Systems, vol. 28, issue 2, pp. 311 - 320, Jan-04-2019.
, "Uncertainty Analysis of the Standard Delay-and-Sum Beamformer and Array Calibration", 15th AIAA/CEAS Aeroacoustics Conference, Miami, FL, May, 2009.
, "Uncertainty Analysis of the Standard Delay-and-Sum Beamformer and Array Calibration", Journal of Sound and Vibration, vol. 329, no. 13, pp. 2654-2682, 06/2010.
, "Uncertainty analysis of the two-microphone method", J. Sound Vib., vol. 304, no. 1-2, pp. 91-109, JUL, 2007.
, "Uncertainty Analysis of the Two-Microphone Method", 8th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2002-2465, June, 2002.
, "Uncertainty-based Design Optimization of a Micro Piezoelectric Composite Energy Reclamation Device", 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York, September, 2004.
, "Uniaxial Process Induced Strained Si: Extending the CMOS Roadmap", IEEE Trans. Electron Dev., vol. 53, pp. 1010-1020, MAY, 2006.
, "A universal tumor cell isolation method enabled by fibrin-coated microchannels", The Analyst, vol. 141, issue 2, pp. 563 - 566, 2016.
, "Use of Miniaturized Devices and Isothermal Amplification for Pathogen Detection in the Field", International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS), Basel, Switzerland, pp. 831-832, 2019.
, "The use of polyurethane as an elastomer in thermoplastic microfluidic devices and the study of its creep properties", ELECTROPHORESIS, vol. 35, issue 2-3, pp. 289 - 297, 02/2014, 2013.
, "Use of RNA amplification and electrophoresis for studying virus aerosol collection efficiency and their comparison with plaque assays", ELECTROPHORESIS, vol. 37, issue 19, pp. 2574 - 2580, Jan-10-2016.
, "Use of vacuum bagging for fabricating thermoplastic microfluidic devices", Lab Chip, vol. 15, issue 1, pp. 62 - 66, 2015.
, "Using 2 x 2 switching modules to build large 2-D MEMS optical switches", GLOBECOM '03. IEEE Global Telecommunications Conference (IEEE Cat. No.03CH37489)GLOBECOM '03. IEEE Global Telecommunications Conference (IEEE Cat. No.03CH37489), vol. 5, San Fransico, CA, USA, IEEE, pp. 2798 - 2802, 2003.
, "Using a combination of gangliosides and cell surface vimentin as surface biomarkers for isolating osteosarcoma cells in microfluidic devices", Journal of Bone Oncology, vol. 28, 06/2021.
, "Using airbrushes to pattern reagents for microarrays and paper-fluidic devices", Microsystems & Nanoengineering, vol. 3, pp. 17055, Nov-20-2017.
, "Using the mass ratio to induce band gaps in a 1D array of nonlinearly coupled oscillators", Proc. ASME 2012 Int. Design Engineering Tech. Conf. & Computers and Information in Eng. Conf. (IDETC/CIE 2012), Chicago, IL, ASME, 08/2012.
, "Validation of a Low Reynolds Number Aerodynamic Characterization Facility", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0880, January, 2009.
, "Valve-Enabled Sample Preparation and Isothermal Amplification for SARS-CoV-2 Detection at the Point-of-Care", International Mechanical Engineering Congress and Exposition, online, ASME, 2021.
, "A Valve-Enabled Sample Preparation Device with Isothermal Amplification for Multiplexed Virus Detection at the Point-of-Care", ACS Sensors, vol. 6, pp. 4176–4184, 2021.
,