Publications

Found 16 results
Author [ Title(Asc)] Type Year
Filters: Author is I Zana  [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
V
Arnold, D. P., I. Zana, F. Cros, and M. G. Allen, "Vertically-laminated magnetic cores by electroplating Ni-Fe into micromachined Si", IEEE Trans. Magn., vol. 40, no. 4, pp. 3060-3062, JUL, 2004.
S
Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
P
Jacobson, S., S. Das, N. Savoulides, J. Steyn, J. H. Lang, H. Li, C. Livermore, M. Schmidt, C. Teo, S. Umans, et al., "Progress toward a microfabricated gas turbine generator for soldier portable power applications", Proc. 24th Army Science Conf., Orlando, FL, November, 2004.
O
Arnold, D. P., I. Zana, F. Herrault, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Optimization of a microscale, axial-flux, permanent-magnet generator", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 165-168, November, 2005.
M
Das, S., D. P. Arnold, I. Zana, J. Park, J. H. Lang, and M. G. Allen, "Multi-watt electric power from a microfabricated permanent-magnet generator", Tech. Dig. 18th IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2005), Miami Beach, FL, pp. 287-290, January, 2005.
Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.
Das, S., D. P. Arnold, I. Zana, J. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.
Zana, I., F. Herrault, D. P. Arnold, and M. G. Allen, "Magnetic patterning of permanent-magnet rotors for microscale motor/generators", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 116-119, November, 2005.
Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines integrated into bulk-micromachined silicon", J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.
Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines embedded in fusion-bonded silicon", Tech. Dig. Solid-State Sensor, Actuator, and MicrosystemsWorkshop (Hilton Head 2004), pp. 129-132, June, 2004.
L
Zana, I., D. P. Arnold, and M. G. Allen, "Large volume, high performance electroplated Co-Pt micromagnets for MEMS applications", Electrochemical Processing in ULSI and MEMS (Electrochem. Soc. Proc. Vol. 2004-17), pp. 404-411, May, 2004.
H
Arnold, D. P., I. Zana, J. Park, S. Das, Y. Joung, D. Veazie, J. H. Lang, and M. G. Allen, "High-speed characterization and mechanical modeling of microscale, axial-flux, permanent-magnet generators", 13th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers 05), vol. 1, Seoul, Korea, pp. 701-704, June, 2005.
Herrault, F., D. P. Arnold, I. Zana, P. Galle, and M. G. Allen, "High temperature operation of multi-watt, axial-flux, permanent-magnet microgenerators", Sensors & Actuators A, vol. 148, pp. 299-305, NOV, 2008.
E
Arnold, D. P., F. Cros, I. Zana, D. Veazie, and M. G. Allen, "Electroplated metal microstructures embedded in fusion-bonded silicon: conductors and magnetic materials", J. Microelectromech. Syst., vol. 13, no. 5, pp. 791-798, OCT, 2004.
D
Arnold, D. P., F. Herrault, I. Zana, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Design optimization of an 8-Watt, microscale, axial-flux, permanent-magnet generator", J. Micromech. Microeng., vol. 16, no. 9, pp. s290-s296, SEP, 2006.
A
Arnold, D. P., I. Zana, and M. G. Allen, "Analysis and optimization of vertically oriented, throughwafer, laminated magnetic cores in silicon", J. Micromech. Microeng, vol. 15, no. 5, pp. 971-977, MAY, 2005.