Publications
"Effects of Fabrication Process Parameters on the Properties of Cyclic Olefin Copolymer Microfluidic Devices", Journal of Microelectromechanical Systems, vol. 15, issue 5, pp. 1060 - 1068, 10/2006.
, "Macro-to-Micro Interface for Microfluidic Devices", Lab on a Chip, vol. 4, no. 6, pp. 526-533, SEP, 2004.
, "A Flush-Mounted Dual-Axis Wall Shear Stress Sensor", Journal of Microelectromechanical Systems, pp. 1 - 7, Jan-01-2020.
, "Development of a Two-Dimensional Wall Shear Stress Sensor for Wind Tunnel Applications", AIAA Scitech 2019 ForumAIAA Scitech 2019 Forum, San Diego, CaliforniaReston, Virginia, American Institute of Aeronautics and Astronautics, 2019.
, "Three-dimensional nonlinear optical endoscopy", Journal of Biomedical Optics, vol. 12, no. 040501, 07/2007.
, "Integration of a Double-Clad Photonic Crystal Fiber, a GRIN Lens and a MEMS Mirror for Nonlinear Optical Microscopy", Biomedical Optics 2006, Ft. Lauderdale, FL, 03/2006.
, "Nonlinear Optical Endoscopy based on a Double-clad Photonic Crystal Fiber and a MEMS Mirror", Optics Express, vol. 14, pp. 1027-1032, 02/2006.
, "Optimization of Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0635, Reno, NV, January, 2003.
, "Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0125, Reno, NV, January, 2002.
, "Low Dimensional Modeling of Zero-Net Mass Flux Actuators", 2nd AIAA Flow Control Conference, AIAA Paper 2004-2413, Portland, OR, June, 2004.
, "Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators", AIAA Journal, vol. 41, issue 2, no. 2, pp. 240-247, MAR, 2003.
, "Use of RNA amplification and electrophoresis for studying virus aerosol collection efficiency and their comparison with plaque assays", ELECTROPHORESIS, vol. 37, issue 19, pp. 2574 - 2580, Jan-10-2016.
, "Thermal lens microscopy as a detector in microdevices", ELECTROPHORESIS, vol. 35, issue 16, pp. 2279 - 2291, 08/2014.
, "Sessile droplets for chemical and biological assays", Lab on a Chip, vol. 17, issue 13, pp. 2150 - 2166, May-23-2017.
, "Quantitative Schlieren Measurements of Coherent Structures In a Cavity Shear Layer", Experiments in Fluids, vol. 30, no. 2, pp. 123-134, JAN, 2001.
, "Collection of magnetic particles from synovial fluid using Nd-Fe-B micromagnets", Symposium of Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), Cannes, France, 2014.
, "Benchtop magnetic particle relaxometer for detection, characterization and analysis of magnetic nanoparticles", Physics in Medicine & Biology, vol. 63, issue 17, pp. 175016, Jan-09-2018.
, "Characterization of the rotational dynamics of magnetic microdiscs in suspension", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2014), Hilton Head, SC, pp. 299-302, 06/2014.
, "Extending the range of wireless power transmission for bioimplants and wearables", 17th PowerMEMS, Kanazawa, Japan, 2017.
, "Experimental investigation of magnetic anisotropy in spin vortex discs", Journal of Applied Physics, vol. 115, 2014.
, "High-throughput focused-ion-beam lithography using doubly charged ions", Workshop on Enabling Nanofabrication for Rapid Innovation, Napa, CA, pp. 22-23, 08/2013.
, "Design and validation of magnetic particle spectrometer for characterization of magnetic nanoparticle relaxation dynamics", AIP Advances, vol. 7, issue 5, pp. 056730, 05/2017.
, "Microscale Magnetic Patterning Of Hard Magnetic Films Using Microfabricated Magnetizing Masks", 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), San Francisco, CA, IEEE, 2014.
, "Modeling and experimental analysis of rotating magnet receivers for electrodynamic wireless power transmission", Journal of Physics D: Applied Physics, vol. 52, issue 18, pp. 185501, Feb-27-2019.
, "Influence of temperature on the magnetic properties of electroplated Co-rich Co-Pt thick films", Journal of Micromechanics and Microengineering, vol. 24, no. 1, 11/2013, 2014.
,