Publications

Found 57 results
[ Author(Desc)] Title Type Year
Filters: First Letter Of Title is A  [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
A
Alvi, F., and L. Cattafesta, "The art and science of flow control – case studies using flow visualization methods", The European Physical Journal - Special Topics, vol. 182, issue 1, pp. 97-112, 04/2010.
Arnold, D. P., I. Zana, and M. G. Allen, "Analysis and optimization of vertically oriented, throughwafer, laminated magnetic cores in silicon", J. Micromech. Microeng, vol. 15, no. 5, pp. 971-977, MAY, 2005.
Arnold, D. P., Y.K. Yoon, and M. Saumer, "Additive Processes for Metals", MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.
B
Bahr, C., J. Li, and L. Cattafesta, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
Bahr, C., T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.
Bahr, C., F. Liu, and L. Cattafesta, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.
Bauer, M., D. P. Arnold, and J. Andrew, "Arrays of Janus-Type Magnetoelectric Nanowires for Passive Magnetic Field Sensing", 2018 IEEE 18th International Conference on Nanotechnology (IEEE-NANO), Cork, Ireland, IEEE, 2018.
Bauer, M., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Assembly of magnetoelectric nanowires into magnetic field sensors", 2017 Electronic Materials and Applications Conference, Orlando, FL, 2017.
Bigham, S., and S. Moghaddam, "Analysis of Microchannel Flow Boiling Process using Unprecedented Microscale Experimental Data", ASME HT/FE/ICNMM 2016, 2016.
C
Carroll, B., E. Boulos, M. Sytsma, L. Cattafesta, J. Hubner, and M. Sheplak, "Aero-Optic Measurement Facility Characterization", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.
Cattafesta, L., and A. Pillarisetti, "Adaptive identification of fluid dynamic systems", 31th fluid dynamics conference & Exhibit, AIAA paper 2001-2978, June, 2001.
Cattafesta, L., and M. Sheplak, "Actuators for Active Flow Control", Annual Review of Fluid Mechanics, vol. 43, no. 1, pp. 247–272, 2011.
Cattafesta, L., Q. Song, D. Williams, C. W. Rowley, and F. Alvi, "Active Control of Flow-Induced Cavity Oscillations", Progress in Aerospace Sciences, vol. 44, pp. 459-502, DEC, 2008.
Cattafesta, L., Y. Tian, and R. Mittal, The Aerodynamics of Heavy Vehicles II: Trucks, Buses, and Trains, Lecture Notes in Applied and Computational Mechanics, vol. 21: Springer, pp. 151-160, DEC, 2008.
Chandrasekaran, V., B. V. Sankar, L. Cattafesta, T. Nishida, and M. Sheplak, "An Analytical Model for Thermoelastic Actuation of Composite Diaphragms", 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.
Cheng, J., W. Liu, Q. Chen, N. Xu, Q. Sun, Y. Liu, W. Wang, and H. Xie, "An auto-aligned vertical comb drive for low-cost variable optical attenuators", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.
Cheng, S., Y. Jin, Y. Rao, and D. P. Arnold, "An active voltage doubling ac/dc converter for low-voltage energy harvesting applications", IEEE Transactions on Power Electronics, vol. 26, no. 8, pp. 2258-2265, 08/2011.
G
Garraud, A., and D. P. Arnold, "Advancements in electrodynamic wireless power transmission", 2016 IEEE SENSORS, Orlando, FL, USA, IEEE, 2016.
Garraud, A., and D. P. Arnold, "Advancements in electrodynamic wireless power transmission", IEEE Sensors Conf., Orlando,FL, 10.2016.
Griffin, B. A., M. D. Williams, C. S. Coffman, and M. Sheplak, "Aluminum Nitride Ultrasonic Air-Coupled Actuator ", Journal of Microelectromechanical Systems, vol. 20, no. 2, pp. 476-486, 04/2011.
Griffin, J., T. Schultz, R. Holman, L. Ukeiley, and L. Cattafesta, "Application of multivariate outlier detection to fluid velocity measurements", Experiments in Fluids, vol. 49, issue 1, pp. 305-317, 07/2010.
Guo, Z. Yang, Q. Cheng Zhao, L. Tao Lin, H. T. Ding, X. S. Liu, J. Cui, Z. Chuan Yang, H. Xie, and G. Zhen Yan, "An acceleration switch with a robust latching mechanism and cylindrical contacts", Journal of Micromechanics and Microengineering, vol. 20, issue 5, pp. 055006, 05/2010.
H
Halim, M. A., A. A. Rendon-Hernandez, S. E. Smith, and D. P. Arnold, "Analysis of a Dual-Transduction Receiver for Electrodynamic Wireless Power Transfer", IEEE Transactions on Power Electronics, vol. 37, issue 6, pp. 7470 - 7479, Jan-06-2022.
Hsu, A., C. Cowan, W. Chu, B. McCoy, A. Wong-Foy, R. Pelrine, C. Velez, D. P. Arnold, J. Lake, J. Ballard, et al., "Automated 2D micro-assembly using diamagnetically levitated milli-robots", 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Montreal, QC, IEEE, 2017.
I
Isfahani, R. Nasr, and S. Moghaddam, "Absorption characteristics of lithium bromide (LiBr) solution constrained by superhydrophobic nanofibrous structures", International Journal of Heat and Mass Transfer, vol. 63, pp. 82 - 90, Jan-08-2013.