Publications

Found 1223 results
[ Author(Asc)] Title Type Year
Filters: Filter is   [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
B
Bigham, S., and S. Moghaddam, "Analysis of Microchannel Flow Boiling Process using Unprecedented Microscale Experimental Data", ASME HT/FE/ICNMM 2016, 2016.
Bigham, S., A. Fazeli, and S. Moghaddam, "Physics of microstructures enhancement of thin film evaporation heat transfer in microchannels flow boiling", Scientific Reports, vol. 7, pp. 44745, May-17-2017.
Bigham, S., and S. Moghaddam, "Fundamentals of Microchannel Flow Boiling Sub-processes and Similarities and Differences with Pool Boiling", 15th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM), Cambridge, MA, 2017.
Tabrizian, R., "Fabrication Process Flows for Implementation of Piezoelectric MEMS Resonators", Microsystems and Nanosystems, vol. Piezoelectric MEMS Resonators, Cham, Springer International Publishing, pp. 283 - 298, 2017.
Bhardwaj, S., M. Sheplak, and T. Nishida, "S/N Optimization and Noise Considerations for Piezoresistive Microphones", 16th International Conference on Noise in Physical Systems and 1/f Fluctuations, Gainesville, FL, World Scientific, pp. 549-552, October, 2001.
Bhanvadia, A. A., R. T. Farley, Y. Noh, and T. Nishida, "3D printing of hollow geometries using blocking liquid substitution stereolithography", Scientific Reports, vol. 13, issue 1, Jan-09-2023.
Bhanvadia, A. A., R. T. Farley, Y. Noh, and T. Nishida, "High-resolution stereolithography using a static liquid constrained interface", Communications Materials, vol. 2, issue 1, 2021.
Bernard, B. P., M. J. Mazzoleni, N. Garraud, D. P. Arnold, and B. Mann, "Experimental investigation of bifurcation induced bandgap reconfiguration", J. Appl. Phys., vol. 116, 2014.
Bernard, B. P., J. W. Peyser, B. Mann, and D. P. Arnold, "Using the mass ratio to induce band gaps in a 1D array of nonlinearly coupled oscillators", Proc. ASME 2012 Int. Design Engineering Tech. Conf. & Computers and Information in Eng. Conf. (IDETC/CIE 2012), Chicago, IL, ASME, 08/2012.
Benard, N., L. Cattafesta, E. Moreau, J. Griffin, and J-P. Bonnet, "On the benefits of hysteresis effects for closed-loop separation control using plasma actuation", Physics of Fluids, vol. 23, issue 8, pp. 083601, 2011.
Benard, N., E. Moreau, J. Griffin, and L. Cattafesta, "Slope seeking for autonomous lift improvement by plasma surface discharge", Experiments in Fluids, vol. 48, issue 5, pp. 791-808, 05/2010.
Benard, N., E. Moreau, J. Griffin, and L. Cattafesta, "Plasma flow control - autonomous lift improvement by slope-seeking", 39th AIAA Fluid Dynamics Conference, AIAA Paper 2009-4182, San Antonio, TX, June, 2009.
Benard, N., J-P. Bonnet, E. Moreau, J. Griffin, and L. Cattafesta, "Benefits of Using Hysteresis Effects for Closed-Loop Separation Control by Plasma Actuator", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.
Bedair, S. S., C. D. Meyer, and B. C. Morgan, "Magnetic Nanoparticle Dosing of MEMS Structures by Solvent Evaporation in Capillaries", IEEE Transactions on Magnetics, vol. 46, issue 6, no. 6, pp. 2198 - 2201, 06/2010.
Baykan, M., S. Thompson, and T. Nishida, "Strain effects on three-dimensional, two-dimensional, and one-dimensional silicon logic devices: Predicting the future of strained silicon", Journal of Applied Physics, vol. 108, no. 9, pp. 093716-24, 11/2010.
Bauer, M. J., A. Thomas, B. Isenberg, J. Varela, A. Faria, D. P. Arnold, and J. S. Andrew, "Ultra-Low-Power Current Sensor Utilizing Magnetoelectric Nanowires", IEEE Sensors Journal, vol. 20, issue 10, pp. 5139 - 5145, Mar-05-2021, 2020.
Bauer, M. J., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Magnetic field sensors using arrays of electrospun magnetoelectric Janus nanowires", Microsystems & Nanoengineering, vol. 4, issue 1, Jan-12-2018.
Bauer, M., D. P. Arnold, and J. Andrew, "Arrays of Janus-Type Magnetoelectric Nanowires for Passive Magnetic Field Sensing", 2018 IEEE 18th International Conference on Nanotechnology (IEEE-NANO), Cork, Ireland, IEEE, 2018.
Bauer, M., X. Wen, P. Tiwari, D. P. Arnold, and J. S. Andrew, "Assembly of magnetoelectric nanowires into magnetic field sensors", 2017 Electronic Materials and Applications Conference, Orlando, FL, 2017.
Bashirullah, R., J. Harris, J. C. Sanchez, T. Nishida, and J. Principe, "Florida Wireless Implantable Recording Electrodes (FWIRE) for Brain Machine Interfaces", IEEE International Symposium on Circuits and Systems (ISCAS 2007), 2084 , June, 2007.
Barquist, C. S., P. Zheng, W. G. Jiang, Y. Lee, Y.-K. Yoon, T. Schumann, J. Nogan, and M. Lilly, "Development of a Spatially Resolved 3He Quasi-Particle Detector", Journal of Low Temperature Physics, vol. 183, issue 3-4, pp. 307 - 312, Jan-05-2016.
Barnard, C., D. Mills, and M. Sheplak, "A system for vector measurement of aerodynamic wall shear stress", 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS)2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Kaohsiung, IEEE, 2017.
Barnard, C., J. Meloy, and M. Sheplak, "An instrumentation grade wall shear stress sensing system", 2016 IEEE SENSORS, Orlando, FL, USA, IEEE, 2016.
Barnard, C., D. Mills, J. Meloy, and M. Sheplak, "Development of a Hydraulically Smooth Wall Shear Stress Sensor Utilizing Through Silicon Vias", Hilton Head 2016 Workshop, 2016.
Bahr, C., F. Liu, and L. Cattafesta, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.