Publications

Found 167 results
Author Title Type [ Year(Desc)]
Filters: Author is Sheplak, M  [Clear All Filters]
1993
Sheplak, M., and E. Spina, "Elimination of Impinging Jet Resonance", 31st AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 93-0733, Reno, NV, January, 1993.
1994
Sheplak, M., and E. Spina, "Control of High-Speed Impinging Jet Resonance", AIAA Journal, vol. 32, no. 8, pp. 1583-1588, JUL, 1994.
Sheplak, M., E. Spina, and C. McGinley, "Hot-Film Anemometry in Hypersonic Flow", 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2232, Colorado Springs, CO, June, 1994.
McGinley, C., E. Spina, and M. Sheplak, "Turbulence Measurements in a Mach 11 Helium Boundary Layer", 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2364, Colorado Springs, CO, June, 1994.
1995
Sheplak, M., E. Spina, and C. McGinley, "Characterization of a Hot-Film Probe for Hypersonic Flow", 6th AIAA International Aerospace Plane and Hypersonic Technologies Conference, AIAA Paper 95-6110, Nashville, TN, April, 1995.
1996
Sheplak, M., E. Spina, and C. McGinley, "Progress in Hot-Film Anemometry for Hypersonic Flow", Experimental Thermal and Fluid Science, vol. 13, no. 1, pp. 21-28, JUL, 1996.
1998
Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear-Stress Sensor Using Stokes Layer Excitation", 36th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 98-0585, Reno, NV, January, 1998.
Sheplak, M., and J. Dugundji, "Large Deflections of Clamped Circular Plates Under Tension and Transitions to Membrane Behavior", J. Appl. Mech., vol. 65, no. 1, pp. 107-115, JUN, 1998.
1999
Sheplak, M., and J. Seiner, "A MEMS Microphone for Aeroacoustics Measurements", 37th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 99-0606, Reno, NV, January, 1999.
Kurdila, A., B. Carroll, T. Nishida, and M. Sheplak, "Reduced Order Modeling for Low Reynolds Number Flow Control", Proceedings of SPIEs 6th Annual International Symposium on Smart Structures and Materials, Mathematics Modeling and Control Conference, vol. 3667, Newport Beach, CA, pp. 68-79, March, 1999.
2000
Chandrasekaran, V., A. Cain, T. Nishida, and M. Sheplak, "Dynamic Calibration Technique for Thermal Shear Stress Sensors with Variable Mean Flow", 38th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2000-0508, Reno, NV, January, 2000.
Naughton, J., and M. Sheplak, "Modern Skin Friction Measurement Techniques: Description, Use, and What to Do with the Data", 21st AIAA Advanced Measurement Technology and Ground Testing Conference, AIAA Paper 2000-2521, Denver, CO, June, 2000.
Saini, R., S. Bhardwaj, T. Nishida, and M. Sheplak, "Scaling Relations for Piezoresistive Microphones", International Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2000.
2001
Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Compliant-Backplate Helmholtz Resonators for Active Noise Control Applications", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0817, Reno, NV, January, 2001.
Sheplak, M., A. Padmanabhan, M. Schmidt, and K. Breuer, "Dynamic Calibration of a Shear Stress Sensor using Stokes Layer Excitation", AIAA Journal, vol. 39, issue 5, no. 5, pp. 819-823, JUN, 2001.
Arnold, D. P., S. Bhardwaj, S. Gururaj, T. Nishida, and M. Sheplak, "A Piezoresistive Microphone for Aeroacoustic Measurements", Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
Bhardwaj, S., M. Sheplak, and T. Nishida, "S/N Optimization and Noise Considerations for Piezoresistive Microphones", 16th International Conference on Noise in Physical Systems and 1/f Fluctuations, Gainesville, FL, World Scientific, pp. 549-552, October, 2001.
Chandrasekaran, V., E. Chow, T. Kenny, T. Nishida, and M. Sheplak, "Through Wafer Electrical Interconnects for MEMS Sensors", Proceedings of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23846, vol. 2, New York, NY, November, 2001.
2002
Wang, G., B. V. Sankar, L. Cattafesta, and M. Sheplak, "Analysis of a Composite Piezoelectric Circular Plate with Initial Stresses for MEMS", International Mechanical Engineering Congress & Exposition, ASME Paper IMECE2002-39337, New Orleans, LA, November, 2002.
Sheplak, M., A. Cain, T. Nishida, and L. Cattafesta, "Characterization of a Micromachined Thermal Shear Stress Sensor", AIAA Journal, vol. 40, no. 6, pp. 1099-1104, APR, 2002.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", International Journal of Aeroacoustics, vol. 1, no. 2, pp. 183-205, APR, 2002.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0666, Reno, NV, January, 2002.
Jansson, D., J. Mathew, J. Hubner, M. Sheplak, and L. Cattafesta, "Design and Validation of an Aeroacoustic Test Facility", 8th AIAA / CEAS Aeroacoustics Conference, AIAA Paper 2002-2466, Breckenridge, CO, June, 2002.
V.S., A. Kasyap, J. Lim, K. Ngo, A. Kurdila, T. Nishida, M. Sheplak, and L. Cattafesta, "Energy Reclamation from a Vibrating Piezoceramic Composite Beam", 9th International Congress on Sound and Vibration, Orlando, FL, July, 2002.