Publications

Garraud, A., O. D. Oniku, and D. P. Arnold, "Influence of temperature on the magnetic properties of electroplated L10 CoPt thick films", Journal of Applied Physics, vol. 117, issue 17, pp. 17C718, 05/2015.

Oniku, O. D., and D. P. Arnold, "Mitigation of interfacial silicide reactions for electroplated CoPt films on Si substrates", Journal of Physics: Conference Series, vol. 660, no. 1, pp. 012140, 2015.

Sheng, W., O. O. Ogunwobi, T. Chen, J. Zhang, T. J. George, C. Liu, and H. Fan, "Capture, release and culture of circulating tumor cells from pancreatic cancer patients using an enhanced mixing chip", Lab on a Chip, vol. 14, issue 1, pp. 89, 2013, 2014.

Oniku, O. D., B. Qi, and D. P. Arnold, "Electroplated L10 CoPt thick-film permanent magnets", J. Appl. Phys., vol. 115, pp. 17E521, 02/2014.

Oniku, O. D., P. V. Ryiz, A. Garraud, and D. P. Arnold, "Imprinting of fine-scale magnetic patterns in electroplated hard magnetic films using magnetic foil masks", Journal of Applied Physics, vol. 115, issue 17, pp. 17A718, 05/2014.

Garraud, A., E. Shorman, O. D. Oniku, B. Qi, and D. P. Arnold, "Influence of temperature on the magnetic properties of electroplated Co-rich Co-Pt thick films", Journal of Micromechanics and Microengineering, vol. 24, no. 1, 11/2013, 2014.

Garraud, A., O. D. Oniku, W. C. Patterson, E. Shorman, D. LeRoy, N. M. Dempsey, and D. P. Arnold, "Microscale Magnetic Patterning Of Hard Magnetic Films Using Microfabricated Magnetizing Masks", 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), San Francisco, CA, IEEE, 2014.

Oniku, O. D., A. Garraud, E. Shorman, W. C. Patterson, and D. P. Arnold, "Modeling of a micromagnetic imprinting process", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2014), Hilton Head, SC, pp. 187-190, 06/2014.

Cleveland, C., S. Moghaddam, and M. E. Orazem, "Nanometer-Scale Corrosion of Copper in De-Aerated Deionized Water", Journal of The Electrochemical Society, vol. 161, issue 3, pp. C107 - C114, May-12-2015, 2014.

Peterson, B., O. D. Oniku, W. C. Patterson, D. Le Roy, A. Garraud, F. Herrault, N. M. Dempsey, D. P. Arnold, and M. G. Allen, "Technology development for short-period magnetic undulators", Physics Procedia, vol. 52, 2014.

George, T. J., O. O. Ogunwobi, W. Sheng, H. Z. Fan, and C. Liu, "“Tissue is the Issue”: Circulating Tumor Cells in Pancreatic Cancer", Journal of Gastrointestinal Cancer, vol. 45, issue S1, pp. 222 - 225, 12/2014.

Oniku, O. D., R. Regojo, Z. A. Kaufman, W. C. Patterson, and D. P. Arnold, "Batch patterning of sub-millimeter features in hard magnetic films using pulsed magnetic fields and soft magnetizing heads", IEEE Trans. on Magn., vol. 49, no. 7, 07/2013.

Griffin, J., M. Oyarzun, L. Cattafesta, J. H. Tu, C. W. Rowley, and R. Mittal, "Control of a canonical separated flow", 43rd AIAA Fluid Dynamics Conference, San Diego, CA, 06/2013.

Cleveland, C., M. E. Orazem, and S. Moghaddam, "Corrosion of Copper in De-Aerated Water by Impedance Spectroscopy", 223rd Electrochemical Society Meeting, Ontario, Canada, 05/2013.

Oniku, O. D., B. Bowers, S. B. Shetye, N. Wang, and D. P. Arnold, "Permanent magnet microstructures using dry-pressed magnetic powders", Journal of Micromechanics and Microengineering, vol. 23, issue 7, pp. 075027, 07/2013.

Peterson, B., F. Herrault, O. D. Oniku, Z. A. Kaufman, and D. P. Arnold, "Assessment of laser-induced damage in laser-micromachined rare-earth permanent magnets", IEEE Trans. Magn., vol. 48, no. 11, 2012.

Oniku, O. D., and D. P. Arnold, "High-energy-density permanent micromagnets formed from heterogeneous magnetic powder mixtures", 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), Paris, France, IEEE, pp. 436 - 439, 2012.

Oniku, O. D., and D. P. Arnold, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.

Sawant, S. G., M. Oyarzun, M. Sheplak, L. Cattafesta, and D. P. Arnold, "Modeling of electrodynamic zero-net mass-flux actuators", AIAA Journal, vol. 50, no. 6, 06/2012.

Yang, S., F. Liu, M. Oyarzun, M. Palavicini, and L. Cattafesta, "Transfer Matrix Modeling of Synthetic Jet Actuators", Fluid Science and Technology, vol. 8, no. 2, 07/2012.

Yang, S., F. Liu, M. Oyarzun, M. Palavicini, and L. Cattafesta, "Transfer Matrix Modeling of Synthetic Jet Actuators", Fluid Science and Technology, vol. 8, no. 2, 07/2012.

Patrick, E., M. E. Orazem, J. C. Sanchez, and T. Nishida, "Corrosion of tungsten microelectrodes used in neural recording applications", J. Neuroscience Methods, vol. 198, pp. 14, 06/2011.

Young, C., M. Baykan, A. Agarwal, H. Madan, K. Akarvardar, C. Hobbs, I. Ok, W. Taylor, C.E. Smith, M.M. Hussain, et al., "Critical Discussion on (100) and (110) Orientation Dependent Transport: nMOS Planar and FinFET", Symposium on VLSI Technology, Kyoto, Japan, 2011.

Takahashi, H., F. Liu, M. Palavicini, M. Oyarzun, J. Griffin, L. Ukeiley, and L. Cattafesta, "Experimental Study of Adaptive Control of High-Speed Flow-Induced Cavity Oscillations", Journal of Fluid Science and Technology, vol. 6, no. 5, pp. 701-716, 07/2011.

Bowers, B., O. D. Oniku, and D. P. Arnold, "Microfabrication and process integration of powder-based permanent magnets", Technologies for Future Micro-Nano Manufacturing, Napa, California, August 2011.