Publications

Wu, L., S. Dooley, E. A. Watson, P. F. McManamon, and H. Xie, "A Tip-Tilt-Piston Micromirror Array for Optical Phased Array Applications", Journal of Microelectromechanical Systems, 2010.

Aram, E., R. Mittal, J. Griffin, and L. Cattafesta, "Towards Effective ZNMF Jet Based Control of a Canonical Separated Flow", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.

Benard, N., L. Cattafesta, E. Moreau, J. Griffin, and J-P. Bonnet, "On the benefits of hysteresis effects for closed-loop separation control using plasma actuation", Physics of Fluids, vol. 23, issue 8, pp. 083601, 2011.

Young, C., M. Baykan, A. Agarwal, H. Madan, K. Akarvardar, C. Hobbs, I. Ok, W. Taylor, C.E. Smith, M.M. Hussain, et al., "Critical Discussion on (100) and (110) Orientation Dependent Transport: nMOS Planar and FinFET", Symposium on VLSI Technology, Kyoto, Japan, 2011.

Young, C., M. Baykan, A. Agarwal, H. Madan, K. Akarvardar, C. Hobbs, I. Ok, W. Taylor, C.E. Smith, M.M. Hussain, et al., "Critical Discussion on (100) and (110) Orientation Dependent Transport: nMOS Planar and FinFET", Symposium on VLSI Technology, Kyoto, Japan, 2011.

Rueff, M., T. Schmitz, B. A. Griffin, D. Mills, and M. Sheplak, "Evaluation of Optical Fiber Positioning using Silicon V-Grooves", 39th North American Manufacturing Research Conference, Corvallis, OR, 2011.

Meloy, J., J. Griffin, J. Sells, V. Chandrasekharan, L. Cattafesta, and M. Sheplak, "Experimental Verification of a MEMS Based Skin Friction Sensor for Quantitative Wall Shear Stress Measurement", 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, 06/2011.

Jao, PF., M. Machado, X. Cheng, D. Senior, G. J. Kim, D. Ding, W. Sun, and Y.K. Yoon, "Fabrication of Nanoporous membrane and its non-lithographic patterning using Electrospinning and Stamp-thru-Mold (ESTM)", IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011), Cancun, Mexico, 01/2011.

Meyer, C. D., S. S. Bedair, L. Xue, C. M. Dougherty, R. Bashirullah, D. P. Arnold, and B. C. Morgan, "Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process", 220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.

Meyer, C. D., S. S. Bedair, L. Xue, C. M. Dougherty, R. Bashirullah, D. P. Arnold, and B. C. Morgan, "Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process", 220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.

Sun, H., D. Fang, K. Jia, F. Maarouf, H. Qu, and H. Xie, "A Low-Power Low-Noise Dual-Chopper Amplifier for Capacitive CMOS-MEMS Accelerometers", IEEE Sensors Journal, vol. 11, issue 4, pp. 925 - 933, 04/2011.

Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.

Blood, D., D. Mills, M. Sheplak, and T. Schmitz, "Picosecond Laser Ablation of Sapphire for High Temperature Sensor Fabrication", Technologies for Future Micro-Nano Manufacturing Workshop, Napa, CA, Transducers Research Foundation, 08/2011.

Griffin, B. A., D. Mills, T. Schmitz, and M. Sheplak, "A Sapphire Based Fiber Optic Dynamic Pressure Sensor for Harsh Environments: Fabrication and Characterization", 49th AIAA Aerospace Sciences Meeting, Orlando, FL, AIAA, 01/2011.

Xue, L., C. D. Meyer, D. P. Arnold, and R. Bashirullah, "Towards miniature step-up power converters for mobile microsystems", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1451-1455, 03/2011.

Challa, V. R., V. Divakar, J. Oscar Mur-Miranda, and D. P. Arnold, "Wireless power transmission to an electrodynamic energy harvester using low-frequency magnetic fields", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 335-338, 11/2011.

Challa, V. R., D. P. Arnold, and J. Oscar Mur-Miranda, "Electrodynamic wireless power transmission using low-frequency fields", 2nd Int. Workshop Wireless Energy Transport and Harvesting, Leuven, Belgium, 05/2012.

R Isfahani, N., J. Darabi, and S. Moghaddam, "Experimental Study of Membrane-based Desorption Process in a New Generation LiBr-Water Absorption System", ASME 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, Atlanta, GA, 03/2012.

Meloy, J., J. Sells, V. Chandrasekharan, J. Griffin, L. Cattafesta, D. P. Arnold, and M. Sheplak, "Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications", Hilton Head 2012, Hilton Head Island, SC, 06/2012.

Paneri, A., G. Ehlert, H. Sodano, and S. Moghaddam, "Graphene-based Proton Exchange Membrane for Direct Methanol Fuel Cells (DMFCs)", Nanotech Conference and Expo 2012, Santa Clara, CA, 07/2012.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors", IEEE Transactions on Magnetics, vol. 48, issue 11, pp. 4436 - 4439, 11/2012.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors", IEEE Transactions on Magnetics, vol. 48, issue 11, pp. 4436 - 4439, 11/2012.

Moghaddam, S., "Micro/Nanoengineering the Next Generation Thermal-Fluid and Energy Conversion Systems", ASME Heat Transfer, Fluid Engineering, and Nanochannels and Microchannels Conference, Puerto Rico, USA, 07/2012.

Yu, D., J. Chung, and S. Moghaddam, "Modeling of Membrane-based Absorption Process in a New Generation LiBr-Water Absorption Refrigeration System", ASME 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, Atlanta, GA, 03/2012.