Publications

Found 1223 results
[ Author(Asc)] Title Type Year
Filters: Filter is   [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
A
Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
Arnold, D. P., "Review of microscale magnetic power generation", IEEE Trans. Magn., vol. 43, no. 11, pp. 3940-3951, NOV, 2007.
Arnold, D. P., I. Zana, F. Herrault, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Optimization of a microscale, axial-flux, permanent-magnet generator", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 165-168, November, 2005.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "A directional acoustic array using silicon micromachined piezoresistive microphones", J. Acous. Soc. Amer., vol. 113, no. 1, pp. 289-298, JAN, 2003.
Arnold, D. P., F. Cros, T. Glover, M. G. Allen, K. Hillman, and D. Veazie, "Materials and fabrication methods for high-temperature micro-magnetic machines for micro-turbine power generation", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 77-81, April, 2003.
Arnold, D. P., S. Bhardwaj, S. Gururaj, T. Nishida, and M. Sheplak, "A Piezoresistive Microphone for Aeroacoustic Measurements", Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines embedded in fusion-bonded silicon", Tech. Dig. Solid-State Sensor, Actuator, and MicrosystemsWorkshop (Hilton Head 2004), pp. 129-132, June, 2004.
Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, pp. 157-190, 2009.
Aram, E., R. Mittal, and L. Cattafesta, "Toward Simple Boundary Condition Representations of Zero-Net Mass-Flux Actuators in Grazing Flow", 39th AIAA Fluid Dynamics Conference, AIAA Paper 2009-4018, San Antonio, TX, June, 2009.
Aram, E., R. Mittal, and L. Cattafesta, "Simple Representations of Zero-Net Mass-Flux Jets in Grazing Flow for Flow-Control Simulations", International Journal of Flow Control, vol. 2, issue 2, pp. 109 - 125, 06/2010.
Aram, E., R. Mittal, J. Griffin, and L. Cattafesta, "Towards Effective ZNMF Jet Based Control of a Canonical Separated Flow", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.
Appukuttan, A., W. Shyy, M. Sheplak, and L. Cattafesta, "Mixed Convection Induced by MEMS-Based Thermal Shear Stress Sensors", Numerical Heat Transfer-A, vol. 43, no. 3, pp. 283-305, JUL, 2003.
Alvi, F., and L. Cattafesta, "The art and science of flow control – case studies using flow visualization methods", The European Physical Journal - Special Topics, vol. 182, issue 1, pp. 97-112, 04/2010.
Alizadehghobadi, S., H. Biglari, H. Niroomand-Oscuii, and M. Habibimatin, "Numerical study of hemodynamics in a complete coronary bypass with venous and arterial grafts and different degrees of stenosis", Computer Methods in Biomechanics and Biomedical Engineering, pp. 1 - 14, Dec-12-2020.
Alipanahrostami, M., X. Jiang, C. Manzanas, J. C. Loeb, M. Pan, T. B. Tilly, J. A. Lednicky, C-Y. Wu, and H. Z. Fan, "Integration of Sample Preparation with RNA Amplification Device for Influenza Virus Detection", International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS), pp. 37-38, 2021.
Albertani, R., P. Khambatta, A. Hart, L. Ukeiley, M. Oyarzun, L. Cattafesta, and G. Abate, "Validation of a Low Reynolds Number Aerodynamic Characterization Facility", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0880, January, 2009.
Ahn, H., C. Kim, J. Kim, D. Senior, and Y.K. Yoon, "Electromechanically Steerable Directional Antenna with Floating Pillar Array", 2010 IEEE International Symposium Antennas and Propagation and CNC/USNC/URSI Radio Science Meeting, Toronto, ON, Canada, IEEE, pp. 1 - 4, 07/2010.
Aghoram, U., V. Anantharam, M. He, K. Natarajan, H. Xie, and M. P. Frank, "Driving Fully-Adiabatic Logic Circuits Using Custom High-Q MEMS Resonators", Proceedings of the 2004 International Conference on Embedded Systems and Applications (ESA’04), Las Vegas, Nevada, USA, 2004.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.
Agashe, J., and D. P. Arnold, "A study of scaling and geometry effects on the forces between cuboidal and cylindrical magnets using analytical force solutions", J. Phys. D: Appl. Phys., vol. 41, no. 10, pp. 105001-1–105001-9, MAY, 2008.
Agashe, J., D. P. Arnold, and L. Cattafesta, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2009.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Acosta, M. A., X. Jiang, P-K. Huang, K. B. Cutler, C. S. Grant, G. M. Walker, and M. P. Gamcsik, "A microfluidic device to study cancer metastasis under chronic and intermittent hypoxia", Biomicrofluidics, vol. 8, issue 5, pp. 054117, 09/2014.