Other

Dr. Fan’s group will have an open house this Friday 10/18 (tomorrow) at 11:00 AM in the Microfluidics lab (Benton 237E). For those who have join IMG recently, the open house is an invitation to everyone in IMG to learn about the research, the projects, and the equipment of an IMG group. Some demos will be set up in the lab, and we will be showing some of our projects:
 

- Pablo, Minh-Chau & Zac: Circulating Tumor Cells (CTCs): explanation on how to run a device for CTCs capture, and visualization of the cells under the microscope.

Dr. Arnold’s group will have an open house on Friday 11/16 at 1:00 PM in the Magnetics lab (Larsen 126). The open house is an invitation to everyone in IMG to learn about the research, the projects, and the equipments of an IMG group. Some demos will be set up in the magnetic lab, and students will discuss about their projects.

• Nicolas Garraud: Electrodynamic wireless power transfer (EWPT).
• Keisha Castillo-Torres: Bio-applications of the rotational dynamics setup and magnetic microdiscs.
• Connor Smith: Vibrating sample magnetometer (VSM) general overview and demo.
• Yuzheng Wang: Characterization of electro-permanent magnet (EPM) samples using the VSM.
• Jacob Ewing: Screen-printed magnetic films for MEMS.

Come learn about the exciting research done by Dr. Yoon's group! The students and research topics are below.

Benton 210 (E-Test)

• Seahee Hwangbo - Through-glass via wireless communications and metaconductors
• Renuka Bowrothu - Through-glass via 5G components and technology
• Timothy Clingenpeel - Metaconductor theory, simulation, reliability, and tunability

Benton 237C (Litho-Lab)

• Todd Schumann - RF and optical applications of perovskite ferroelectric materials; smart mouthguard

Come on out to learn about the research going on in the Nishida group! The students and research topics can be found below.

Benton 214 (M-test):

• Paul Chojecki - Stress measurements and modeling of ferroelectric hafnium oxide   
• Zane Forrester - Pyroelectric characterization of thin hafnium oxide films  
• Kartik Sondhi - Flexible and Stretchable Printed electronics
• Glen Walters - Ferroelectric fabrication and characterization of hafnium oxide for non-volatile memory 

Benton 230 (Microfab):

• Aftab Bhanvadia - Development of a microstereolithography system (3D printing) for micro-devices (Demo outside, tour for those with access to 230)

Ana will defend her Undergraduate Honors Thesis titled:"Exploiting Micromechanical Resonators for Extraction of Acoustic Properties in AlGaN films" in Larsen 234 at 12:30pm. Snacks will served.