David Arnold

Primary tabs

Found 249 results
Author Title [ Type(Asc)] Year
Filters: First Letter Of Title is F  [Clear All Filters]
Journal Article
Arnold, D. P., "Review of microscale magnetic power generation", IEEE Trans. Magn., vol. 43, no. 11, pp. 3940-3951, NOV, 2007.
Arnold, D. P., F. Herrault, I. Zana, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Design optimization of an 8-Watt, microscale, axial-flux, permanent-magnet generator", J. Micromech. Microeng., vol. 16, no. 9, pp. s290-s296, SEP, 2006.
Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines integrated into bulk-micromachined silicon", J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.
Conference Paper
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Conference Paper
Boniche, I., C. D. Meyer, P. Taylor, N. Dhar, and D. P. Arnold, "Progress towards a micromachined thermoelectric generator using PbTe and PbSnSeTe thin films", Tech. Dig. 6th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2006), Berkeley, CA, pp. 195-198, November, 2006.
Journal Article
Arnold, D. P., I. Zana, and M. G. Allen, "Analysis and optimization of vertically oriented, throughwafer, laminated magnetic cores in silicon", J. Micromech. Microeng, vol. 15, no. 5, pp. 971-977, MAY, 2005.
Conference Paper
Arnold, D. P., I. Zana, J. Park, S. Das, Y. Joung, D. Veazie, J. H. Lang, and M. G. Allen, "High-speed characterization and mechanical modeling of microscale, axial-flux, permanent-magnet generators", 13th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers 05), vol. 1, Seoul, Korea, pp. 701-704, June, 2005.
Zana, I., F. Herrault, D. P. Arnold, and M. G. Allen, "Magnetic patterning of permanent-magnet rotors for microscale motor/generators", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 116-119, November, 2005.
Das, S., D. P. Arnold, I. Zana, J. Park, J. H. Lang, and M. G. Allen, "Multi-watt electric power from a microfabricated permanent-magnet generator", Tech. Dig. 18th IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2005), Miami Beach, FL, pp. 287-290, January, 2005.
Arnold, D. P., I. Zana, F. Herrault, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Optimization of a microscale, axial-flux, permanent-magnet generator", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 165-168, November, 2005.
Arnold, D. P., P. Galle, F. Herrault, S. Das, J. H. Lang, and M. G. Allen, "A self-contained, flow-powered microgenerator system", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 113-115, November, 2005.
Journal Article
Arnold, D. P., F. Cros, I. Zana, D. Veazie, and M. G. Allen, "Electroplated metal microstructures embedded in fusion-bonded silicon: conductors and magnetic materials", J. Microelectromech. Syst., vol. 13, no. 5, pp. 791-798, OCT, 2004.
Conference Paper
Zana, I., D. P. Arnold, and M. G. Allen, "Large volume, high performance electroplated Co-Pt micromagnets for MEMS applications", Electrochemical Processing in ULSI and MEMS (Electrochem. Soc. Proc. Vol. 2004-17), pp. 404-411, May, 2004.
Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines embedded in fusion-bonded silicon", Tech. Dig. Solid-State Sensor, Actuator, and MicrosystemsWorkshop (Hilton Head 2004), pp. 129-132, June, 2004.
Jacobson, S., S. Das, N. Savoulides, J. Steyn, J. H. Lang, H. Li, C. Livermore, M. Schmidt, C. Teo, S. Umans, et al., "Progress toward a microfabricated gas turbine generator for soldier portable power applications", Proc. 24th Army Science Conf., Orlando, FL, November, 2004.
Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
Journal Article
Arnold, D. P., I. Zana, F. Cros, and M. G. Allen, "Vertically-laminated magnetic cores by electroplating Ni-Fe into micromachined Si", IEEE Trans. Magn., vol. 40, no. 4, pp. 3060-3062, JUL, 2004.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "A directional acoustic array using silicon micromachined piezoresistive microphones", J. Acous. Soc. Amer., vol. 113, no. 1, pp. 289-298, JAN, 2003.
Conference Paper
Arnold, D. P., F. Cros, T. Glover, M. G. Allen, K. Hillman, and D. Veazie, "Materials and fabrication methods for high-temperature micro-magnetic machines for micro-turbine power generation", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 77-81, April, 2003.
Cros, F., D. P. Arnold, M. G. Allen, S. Das, H. Koser, and J. H. Lang, "Micro-magnetic induction machines for portable power applications", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 17-21, April, 2003.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.
Arnold, D. P., S. Bhardwaj, S. Gururaj, T. Nishida, and M. Sheplak, "A Piezoresistive Microphone for Aeroacoustic Measurements", Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.