David Arnold

Primary tabs

Found 249 results
[ Author(Desc)] Title Type Year
Filters: Author is D. P. Arnold
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
S
Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly of multiple component types: simultaneous and sequential sorting of a heterogeneous mixture", Proc. 6th Conf. Foundations of Nanoscience (FNANO 2009), Snowbird, UT, 04/2009.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly with angular orientation and selective bonding", 2009 NSF CMMI Engineering Research and Innovation Conference, Honolulu, HI, 06/2009.
C
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Metal-On-Silicon Differential Capacitive Shear Stress Sensor", Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.
M
Morgan, B. C., S. S. Bedair, W. Nothwang, D. P. Arnold, C. D. Meyer, B. Bowers, A. Sopeju, C. M. Dougherty, L. Xue, and R. Bashirullah, "Micro-power requirements & conversion for autonomous microsystems", NATO SET-150 Specialist Meeting on Energy Technologies & Management for Portable Power for Military Applications, Brdo pri Kranju, Slovenia, 05/2009.
S
Shetye, S., I. Eskinazi, and D. P. Arnold, "Part-to-Part and Part-to-Substarte Magnetic Self-Assembly of Millimeter Scale Components with Angular Orientation", Tech. Dig. 22nd IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2009), Sorrento, Italy, pp. 669-672, January, 2009.
A
Arnold, D. P., and N. Wang, "Permanent Magnets for MEMS", J. Microelectromech. Syst., vol. 18, no. 6, pp. 1255-1266, 12/2009.
B
Bowers, B., and D. P. Arnold, "Spherical, rolling magnet generators for passive energy harvesting from human motion", J. Micromech. Microeng., vol. 19, no. 9, pp. 094008, 09/2009.
A
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.
L
Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.
S
Shetye, S., and D. P. Arnold, "Magnetic self-assembly of millimeter scale components", 2008 NSF CMMI Engineering Research and Innovation Conference, Knoxville, TN, 01/2008.
C
Cheng, S., and D. P. Arnold, "A Multi-Pole Magnetic Generator with Enhanced Voltage Output for Low-Frequency Vibrational Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2008), Sendai Japan, pp. 125-128, November, 2008.
S
Shetye, S., I. Eskinazi, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", IEEE Trans. Magn., vol. 44, no. 11, pp. 4293-4296, NOV, 2008.
B
Bowers, B., and D. P. Arnold, "Spherical Magnetic Generators for Bio-Motional Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (Power MEMS 2008), Sendai, Japan, pp. 281-284, November, 2008.
W
Wang, N., and D. P. Arnold, "Thick electroplated Co-rich Co–Pt micromagnet arrays for magnetic MEMS", IEEE Trans. Magn., vol. 44, no. 11, pp. 3969-3972, 11/2008.
Wang, N., B. Bowers, and D. P. Arnold, "Wax-bonded NdFeB micromagnets for microelectromechanical systems application", J. Applied Physics, vol. 103, pp. 07E109, 04/2008.
M
Masilamani, S., I. Boniche, C. D. Meyer, R. Durscher, and D. P. Arnold, "Design of a tubular microfabricated power generation system for hot exhaust streams", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Germany, pp. 249-252, November, 2007.
S
Shetye, S., J. Agashe, and D. P. Arnold, "Investigation of microscale magnetic forces for magnet array self-assembly", IEEE Trans. Magn., vol. 43, no. 6, pp. 2713-2715, JUN, 2007.
B
Bowers, B., J. Agashe, and D. P. Arnold, "A method to form bonded micromagnets embedded in silicon", Proc. 14th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 07), vol. 2, pp. 1581-1584, June, 2007.
L
Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.
C
Cheng, S., N. Wang, and D. P. Arnold, "Modeling of magnetic vibrational energy harvesters using equivalent circuit representations", J. Micromech. Microeng., vol. 17, no. 11, pp. 2328-2335, NOV, 2007.
Cheng, S., N. Wang, and D. P. Arnold, "Optimization of magnetic vibrational energy harvesting systems using equivalent circuit representations", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2007), Freiburg, Germany, pp. 89-92, November, 2007.