David Arnold

Primary tabs

Found 249 results
Author Title Type [ Year(Desc)]
Filters: First Letter Of Title is G  [Clear All Filters]
2010
Wang, N., and D. P. Arnold, "Batch-fabricated electrodynamic microactuators with integrated micromagnets", IEEE Trans. Magn., vol. 46, no. 6, pp. 1798-1801, 06/2010.
Chandrasekharan, V., J. Sells, D. P. Arnold, and M. Sheplak, "Effect of dynamic pressure on direct shear stress sensor design", 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-004, 01/2010.
Zhang, Y., and D. P. Arnold, "Electromechanical inductors for power converter applications", 10th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2010), Leuven, Belgium, pp. 131-134, 12/2010.
Zito, J., and D. P. Arnold, "Fabrication and Electrical Characterization of Microscale Dielectric Barrier Discharge Devices", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head), Hilton Head, SC, pp. 238-241, 06/2010.
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "High-Inductance-Density, Air-Core, Power Inductors, and Transformers Designed for Operation at 100–500 MHz", IEEE Transactions on Magnetics, vol. 46, issue 6, pp. 2236 - 2239, 06/2010.
Cheng, S., R. D. Natarajan, and D. P. Arnold, "The importance of coupling strength for maximizing the output power of electrodynamic vibrational energy harvesters", 10th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2010), Leuven, Belgium, pp. 351-354, 12/2010.
Rao, Y., and D. P. Arnold, "An Input-Powered Active AC/DC Converter with Zero Standby Power for Energy Harvesting Applications", IEEE Energy Conversion Congress and Exposition (ECCE), Atlanta, GA, pp. 4441-4446, 09/2010.
Zito, J., D. P. Arnold, R. Durscher, and S. Roy, "Investigation of impedance characteristics and power delivery for dielectric barrier discharge plasma actuators", 48th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2010.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Magnetic self-assembly of millimeter-scale components with angular orientation", J. Micromech. Syst., vol. 19, issue 3, pp. 599-609, 06/2010.
Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A MEMS Direct Skin Friction Sensor", Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined thick-film copper power inductors and transformers for integrated power converters", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2010), Hilton Head, SC, pp. 455-458, 06/2010.
Sells, J., V. Chandrasekharan, H. Zmuda, M. Sheplak, and D. P. Arnold, "Passive Wireless Direct Shear Stress Measurement", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 368-371, 06/2010.
Morgan, B. C., S. S. Bedair, J. S. Pulskamp, R. G. Polcawich, C. D. Meyer, C. M. Dougherty, L. Xue, D. P. Arnold, R. Bashirullah, R. Miller, et al., "Power considerations for MAST platforms", Proc. SPIE Defense Security & Sensing Conf. (Micro- and Nanotechnology Sensors, Systems, and Applications II), vol. 7679, no. 76790V, 12 pages, Orlando, FL, 05/2010.
Morgan, B. C., S. S. Bedair, C. D. Meyer, L. Xue, C. M. Dougherty, R. Bashirullah, and D. P. Arnold, "Power for autonomous microsystems", 27th Army Science Conf., Orlando, FL, 11/2010.
Boniche, I., and D. P. Arnold, "Radial Thermoelectric Generator Modules for In-Line Power Generation From Hot Gas Streams", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head), Hilton Head, SC, pp. 118-121, 06/2010.
Cheng, S., and D. P. Arnold, "A study of a multi-pole magnetic generator for low-frequency vibrational energy harvesting", J. Micromech. Microeng., vol. 20, no. 2, pp. 025015, 02/2010.
Cheng, S., and D. P. Arnold, "Wireless power transmission via magnetic coupling to an electrodynamic receiver", 10th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2010), Leuven, Belgium, pp. 61-64, 12/2010.
2009
Cheng, S., Y. Jin, Y. Rao, and D. P. Arnold, "A Bridge Voltage Doubler AC/DC Converter for Low-Voltage Energy Harvesting Applications", Tech. Dig. 9th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2009), Washington DC, pp. 25-28,, December, 2009.
Chandrasekharan, V., J. Sells, D. P. Arnold, and M. Sheplak, "Characterization of a MEMS-Based Floating Element Shear Stress Sensor", 47th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, 01/2009.
Boniche, I., S. Masilamani, R. Durscher, B. C. Morgan, and D. P. Arnold, "Design of a Miniaturized Thermoelectric Generator using Micromachined Silicon Substrates", Journal of Electronic Materials, vol. 38, no. 7, pp. 1293-1302, 07/2009.
Agashe, J., D. P. Arnold, and L. Cattafesta, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2009.
Je, S. - S., N. Wang, H. C. Brown, D. P. Arnold, and J. Chae, "An electromagnetically actuated microspeaker with fully-integrated wax-bonded Nd–Fe–B micromagnets for hearing aid applications", 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, 06/2009.
Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, 2009.
Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, pp. 157-190, 2009.
Wang, N., and D. P. Arnold, "Fully batch-fabricated MEMS magnetic vibrational energy harvesters", Tech. Dig. 9th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2009), Washington, DC, December, 2009.