David Arnold

Primary tabs

Found 249 results
Author Title Type [ Year(Asc)]
Filters: First Letter Of Title is D  [Clear All Filters]
2013
Cheng, S., and D. P. Arnold, "Defining the coupling coefficient for electrodynamic transducers", J. Acous. Soc. Amer., vol. 134, no. 5, 11/2013.
McEachern, K. M., and D. P. Arnold, "Electrodynamic Wireless Power Transmission to a Torsional Receiver", Journal of Physics: Conference Series, vol. 476, London, UK, IOP Publishing, pp. 012004, 12/2013.
Rao, Y., S. Cheng, and D. P. Arnold, "An energy harvesting system for passively generating power from human activities", J. Micromech. Microeng., vol. 23, no. 11, pp. 9, 11/2013.
Zito, J., D. P. Arnold, R. Durscher, and S. Roy, "Exploration of ceramic dielectrics for microscale dielectric barrier discharge plasma actuators", 44th AIAA Plasmadynamics and Lasers Conf., pp. 23, 06/2013.
Garraud, N., J. Fridmann, B. P. Gila, and D. P. Arnold, "High-throughput focused-ion-beam lithography using doubly charged ions", Workshop on Enabling Nanofabrication for Rapid Innovation, Napa, CA, pp. 22-23, 08/2013.
Mur-Miranda, J. Oscar, S. Cheng, and D. P. Arnold, "Improving the efficiency of electrodynamic wireless power transmission", 7th European Conf. Antennas and Propagation (EuCAP 2013), Gothenburg, Sweden, EurAAP, 04/2013.
Cheng, S., and D. P. Arnold, "Microfabricated electrodynamic transformers for electromechanical power conversion", J. Micromech. Microeng., vol. 23, no. 11, pp. 10, 11/2013.
Oniku, O. D., B. Bowers, S. B. Shetye, N. Wang, and D. P. Arnold, "Permanent magnet microstructures using dry-pressed magnetic powders", Journal of Micromechanics and Microengineering, vol. 23, issue 7, pp. 075027, 07/2013.
Challa, V. R., S. Cheng, and D. P. Arnold, "The role of coupling strength in the performance of electrodynamic vibrational energy harvesters", Smart Materials and Structures, vol. 22, issue 2, pp. 025005, 02/2013.
Wen, X., J. Starr, J. S. Andrew, and D. P. Arnold, "A scalable nanomanufacturing process for nanocomposite magnetic microstructures", Workshop on Enabling Nanofabrication for Rapid Innovation, Napa, CA, 05/2013.
2012
Peterson, B., F. Herrault, O. D. Oniku, Z. A. Kaufman, and D. P. Arnold, "Assessment of laser-induced damage in laser-micromachined rare-earth permanent magnets", IEEE Trans. Magn., vol. 48, no. 11, 2012.
Sawant, S. G., I. Eskinazi, M. Sheplak, L. Cattafesta, and D. P. Arnold, "A comparative study of two methods for driving electrodynamic zero-net-mass-flux actuators", 6th AIAA Flow Control Conf., New Orleans, LA, AIAA, 06/2012.
Cheng, S., and D. P. Arnold, "Demonstration of a micromachined electrodynamic transformer and application in a resonant dc/ac power inverter", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.
Challa, V. R., D. P. Arnold, and J. Oscar Mur-Miranda, "Electrodynamic wireless power transmission using low-frequency fields", 2nd Int. Workshop Wireless Energy Transport and Harvesting, Leuven, Belgium, 05/2012.
Zhang, Y., and D. P. Arnold, "Electromechanical inductors with enhanced electrical inductance", Sensors & Actuators A. Physical, vol. 180, pp. 187-192, 06/2012.
Meloy, J., J. Sells, V. Chandrasekharan, J. Griffin, L. Cattafesta, D. P. Arnold, and M. Sheplak, "Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications", Hilton Head 2012, Hilton Head Island, SC, 06/2012.
Zito, J., R. Durscher, J. Soni, S. Roy, and D. P. Arnold, "Flow and force inducement using micron size dielectric barrier discharge actuators", Appl. Phys. Lett., vol. 100, 05/2012.
Rao, Y., S. Cheng, and D. P. Arnold, "A fully self-sufficient energy harvesting system for human movements", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.
Oniku, O. D., and D. P. Arnold, "High-energy-density permanent micromagnets formed from heterogeneous magnetic powder mixtures", 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), Paris, France, IEEE, pp. 436 - 439, 2012.
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors", IEEE Transactions on Magnetics, vol. 48, issue 11, pp. 4436 - 4439, 11/2012.
Peterson, B., W. C. Patterson, F. Herrault, D. P. Arnold, and M. G. Allen, "Laser-micromachined permanent magnet arrays with spatially alternating magnetic field distribution", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.
Zito, J., R. Durscher, J. Soni, S. Roy, and D. P. Arnold, "Mechano-fluidic characterization of microscale dielectric barrier discharge plasma actuators", Hilton Head 2012, Hilton Head Island, SC, 06/2012.
Challa, V. R., and D. P. Arnold, "MEMS electrodynamic vibrational energy harvesters using multi-pole magnetic architectures", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.
Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductors with high inductance density via mechanical energy storage", J. Micromech. Microeng., vol. 22, no. 9, pp. 11, 08/2012.
Oniku, O. D., and D. P. Arnold, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.