Christopher Meyer

Primary tabs

Found 16 results
[ Author(Asc)] Title Type Year
Filters: First Letter Of Last Name is T  [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
M
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined wiring board with integrated microinductor for chip-scale power conversion", IEEE Trans. Power Electron, vol. 29, no. 11, Nov. 2014.
Meyer, C. D., S. S. Bedair, B. C. Morgan, X. Lin, R. Bashirullah, D. P. Arnold, I. M. Kierzewski, and N. Lazarus, "Power management for small scale systems", Proc. SPIE Defense Security & Sensing Conf. (Micro- and Nanotechnology Sensors, Systems, and Applications VI), vol. 9083, Baltimore, MD, pp. 90831U, 05/2014.
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors", IEEE Transactions on Magnetics, vol. 48, issue 11, pp. 4436 - 4439, 11/2012.
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Ultra-miniaturized power converter modules using micromachined copper scaffolds", Hilton Head 2012, Hilton Head Island, SC, 06/2012.
Meyer, C. D., S. S. Bedair, L. Xue, C. M. Dougherty, R. Bashirullah, D. P. Arnold, and B. C. Morgan, "Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process", 220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.
X
Xue, L., C. D. Meyer, D. P. Arnold, and R. Bashirullah, "Towards miniature step-up power converters for mobile microsystems", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1451-1455, 03/2011.
B
Bedair, S. S., C. D. Meyer, and B. C. Morgan, "Magnetic Nanoparticle Dosing of MEMS Structures by Solvent Evaporation in Capillaries", IEEE Transactions on Magnetics, vol. 46, issue 6, no. 6, pp. 2198 - 2201, 06/2010.
M
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined thick-film copper power inductors and transformers for integrated power converters", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2010), Hilton Head, SC, pp. 455-458, 06/2010.
Morgan, B. C., S. S. Bedair, J. S. Pulskamp, R. G. Polcawich, C. D. Meyer, C. M. Dougherty, L. Xue, D. P. Arnold, R. Bashirullah, R. Miller, et al., "Power considerations for MAST platforms", Proc. SPIE Defense Security & Sensing Conf. (Micro- and Nanotechnology Sensors, Systems, and Applications II), vol. 7679, no. 76790V, 12 pages, Orlando, FL, 05/2010.
Morgan, B. C., S. S. Bedair, C. D. Meyer, L. Xue, C. M. Dougherty, R. Bashirullah, and D. P. Arnold, "Power for autonomous microsystems", 27th Army Science Conf., Orlando, FL, 11/2010.
Morgan, B. C., S. S. Bedair, W. Nothwang, D. P. Arnold, C. D. Meyer, B. Bowers, A. Sopeju, C. M. Dougherty, L. Xue, and R. Bashirullah, "Micro-power requirements & conversion for autonomous microsystems", NATO SET-150 Specialist Meeting on Energy Technologies & Management for Portable Power for Military Applications, Brdo pri Kranju, Slovenia, 05/2009.
H
Heymann, D., C. D. Meyer, N. Jankowski, and B. C. Morgan, "Performance Modeling of Thermoelectric Generators as a Function of System Thermal Management", PowerMEMS, Washington, DC, Technical Digest of the 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, 12/2009.
M
Masilamani, S., I. Boniche, C. D. Meyer, R. Durscher, and D. P. Arnold, "Design of a tubular microfabricated power generation system for hot exhaust streams", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Germany, pp. 249-252, November, 2007.
B
Boniche, I., C. D. Meyer, P. Taylor, N. Dhar, and D. P. Arnold, "Progress towards a micromachined thermoelectric generator using PbTe and PbSnSeTe thin films", Tech. Dig. 6th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2006), Berkeley, CA, pp. 195-198, November, 2006.