Publications
"Design, fabrication, and characterization of a MEMS dual-backplate capacitive microphone", Deparment of Electrical and Computer Engineering, vol. Ph.D., Gainesville, University of Florida, pp. 250, 2007.
, ,
Endoscopic OCT probes with immersed mems mirrors, no. US20190150715A1, 2019.
, , Integration of Lateral Filter Arrays with Immunoaffinity for Circulating Tumor Cell Isolation: Angew. Chem. Int. Ed., 2019.
, "A Wirelessly Rechargeable AA Battery Using Electrodynamic Wireless Power Transmission", Energies, vol. 14, issue 9, pp. 2368, Jan-05-2021.
, "Wireless power transmission to an electromechanical receiver using low-frequency magnetic fields", Smart Materials and Structures, vol. 21, issue 11, pp. 115017, 11/2012.
, "Wireless Power Transfer Systems Using Metamaterials: A Review", IEEE Access, vol. 8, pp. 147930 - 147947, Jan-01-2020.
, "Wideband RELAX and Wideband CLEAN for Aeroacoustic Imaging", J. Acoust. Soc. Am., vol. 115, no. 2, pp. 757-767, MAR, 2004.
, "Wide-angle structured light with a scanning MEMS mirror in liquid", Optics Express, vol. 24, issue 4, no. 4, pp. 3479-3487, 02/2016.
, "Wax-bonded NdFeB micromagnets for microelectromechanical systems application", J. Applied Physics, vol. 103, pp. 07E109, 04/2008.
, "VO₂-Based MEMS Mirrors", Journal of Microelectromechanical Systems, pp. 780-787, 2016.
, "A Voltage-Multiplying Self-Powered AC/DC Converter with 0.35 V Minimum Input Voltage for Energy Harvesting Applications", IEEE Transactions on Power Electronics, vol. 26, no. 9, pp. 2542-2549, 09/2011.
, "Vertically-laminated magnetic cores by electroplating Ni-Fe into micromachined Si", IEEE Trans. Magn., vol. 40, no. 4, pp. 3060-3062, JUL, 2004.
, "Vertical Comb-finger Capacitive Actuation and Sensing for CMOS-MEMS", Sensors & Actuators, vol. 95, pp. 212-221, 01/2002.
, "Velocity and Surface Pressure Measurements in an Open Cavity", Experiments in Fluids, vol. 38, issue 5, no. 5, pp. 656-671, MAY, 2005.
, "Valve‐Enabled Sample Preparation and RNA Amplification in a Coffee Mug for Zika Virus Detection", Angew Chem Int Ed Engl, vol. 57, issue 52, 10/2018.
, "A Valve-Enabled Sample Preparation Device with Isothermal Amplification for Multiplexed Virus Detection at the Point-of-Care", ACS Sensors, vol. 6, pp. 4176–4184, 2021.
, "Using airbrushes to pattern reagents for microarrays and paper-fluidic devices", Microsystems & Nanoengineering, vol. 3, pp. 17055, Nov-20-2017.
, "Using a combination of gangliosides and cell surface vimentin as surface biomarkers for isolating osteosarcoma cells in microfluidic devices", Journal of Bone Oncology, vol. 28, 06/2021.
, "Use of vacuum bagging for fabricating thermoplastic microfluidic devices", Lab Chip, vol. 15, issue 1, pp. 62 - 66, 2015.
, "Use of RNA amplification and electrophoresis for studying virus aerosol collection efficiency and their comparison with plaque assays", ELECTROPHORESIS, vol. 37, issue 19, pp. 2574 - 2580, Jan-10-2016.
, "The use of polyurethane as an elastomer in thermoplastic microfluidic devices and the study of its creep properties", ELECTROPHORESIS, vol. 35, issue 2-3, pp. 289 - 297, 02/2014, 2013.
, "A universal tumor cell isolation method enabled by fibrin-coated microchannels", The Analyst, vol. 141, issue 2, pp. 563 - 566, 2016.
, "Uniaxial Process Induced Strained Si: Extending the CMOS Roadmap", IEEE Trans. Electron Dev., vol. 53, pp. 1010-1020, MAY, 2006.
,