Publications

Cattafesta, L., and M. Sheplak, Fundamentals and Applications of Modern Flow Control, vol. 231, pp. 149-175, DEC, 2009.

Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.

Sheplak, M., L. Cattafesta, and Y. Tian, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 67-73, 2008.

Chandrasekharan, V., J. Naughton, and M. Sheplak, "Shear Stress Measurements", Encyclopedia of Aerocpace Engineering, 1, vol. 1, 2010.

Carroll, B., E. Boulos, M. Sytsma, L. Cattafesta, J. Hubner, and M. Sheplak, "Aero-Optic Measurement Facility Characterization", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.

Williams, M. D., B. A. Griffin, A. Ecker, J. Meloy, and M. Sheplak, "An Aluminum Nitride Piezoelectric Microphone for Aeroacoustics Applications", Hilton Head 2010: A Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, Transducer Research Foundation, Inc., 06/2010.

Wang, G., B. V. Sankar, L. Cattafesta, and M. Sheplak, "Analysis of a Composite Piezoelectric Circular Plate with Initial Stresses for MEMS", International Mechanical Engineering Congress & Exposition, ASME Paper IMECE2002-39337, New Orleans, LA, November, 2002.

Chandrasekaran, V., B. V. Sankar, L. Cattafesta, T. Nishida, and M. Sheplak, "An Analytical Model for Thermoelastic Actuation of Composite Diaphragms", 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.

Mills, D. A., W. C. Patterson, C. Keane, and M. Sheplak, "Characterization of a Fully-Differential Capacitive Wall Shear Stress Sensor for Low-Speed Wind Tunnels", 2018 AIAA Aerospace Sciences Meeting2018 AIAA Aerospace Sciences Meeting, Kissimmee, FloridaReston, Virginia, American Institute of Aeronautics and Astronautics, 2018.

Mills, D. A., W. C. Patterson, B. Freidkes, C. Keane, and M. Sheplak, "Characterization of a Fully-Differential, Dual-Axis, Capacitive Wall Shear Stress Sensor System for Low-Speed Wind Tunnels", AIAA Aviation 2019 ForumAIAA Aviation 2019 Forum, Dallas, TexasReston, Virginia, American Institute of Aeronautics and Astronautics, 2019.

Sheplak, M., E. Spina, and C. McGinley, "Characterization of a Hot-Film Probe for Hypersonic Flow", 6th AIAA International Aerospace Plane and Hypersonic Technologies Conference, AIAA Paper 95-6110, Nashville, TN, April, 1995.

Mills, D. A., C. Barnard, and M. Sheplak, "Characterization of a Hydraulically Smooth Wall Shear Stress Sensor for Low-Speed Wind Tunnel Applications", 55th AIAA Aerospace Sciences Meeting55th AIAA Aerospace Sciences Meeting, Grapevine, TexasReston, Virginia, American Institute of Aeronautics and Astronautics, 2017.

Chandrasekharan, V., J. Sells, D. P. Arnold, and M. Sheplak, "Characterization of a MEMS-Based Floating Element Shear Stress Sensor", 47th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, FL, 01/2009.

Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.

Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0666, Reno, NV, January, 2002.

Sawant, S. G., I. Eskinazi, M. Sheplak, L. Cattafesta, and D. P. Arnold, "A comparative study of two methods for driving electrodynamic zero-net-mass-flux actuators", 6th AIAA Flow Control Conf., New Orleans, LA, AIAA, 06/2012.

Schultz, T., L. Cattafesta, and M. Sheplak, "Comparison of the two microphone method and the modal decomposition method for acoustic impedance testing", 12th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2006-2695, Cambridge, MA, May, 2006.

Schultz, T., F. Liu, M. Sheplak, L. Cattafesta, and M. Jones, "A Comparison Study of Normal-Incidence Acoustic Impedance Measurements of a Perforate Liner", 15th AIAA/CEAS Aeroacoustics conference, AIAA 2009-3301, Miami, FL, May, 2009.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Compliant-Backplate Helmholtz Resonators for Active Noise Control Applications", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0817, Reno, NV, January, 2001.

Kadirvel, K., R. Taylor, S. Horowitz, W. Hunt, M. Sheplak, and T. Nishida, "Design and Characterization of a MEMS Optical Microphone", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1030, Reno, NV, January, 2004.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.

Jansson, D., J. Mathew, J. Hubner, M. Sheplak, and L. Cattafesta, "Design and Validation of an Aeroacoustic Test Facility", 8th AIAA / CEAS Aeroacoustics Conference, AIAA Paper 2002-2466, Breckenridge, CO, June, 2002.

Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.

Kadirvel, K., D. Martin, J. Liu, R. M. Fox, M. Sheplak, L. Cattafesta, and T. Nishida, "Design, Modeling and Simulation of a Closed-Loop Controller for a Dual Backplate MEMS Capacitive Microphone", 6th IEEE Conference on Sensors, Atlanta, GA, pp. 87-90, October, 2007.