Publications
The Aerodynamics of Heavy Vehicles II: Trucks, Buses, and Trains, Lecture Notes in Applied and Computational Mechanics, vol. 21: Springer, pp. 151-160, DEC, 2008.
, Fundamentals and Applications of Modern Flow Control, vol. 231, pp. 149-175, DEC, 2009.
, "Fundamentals of Wind-Tunnel Design", Encyclopedia of Aerospace Engineering, vol. 1: Wiley, 2010.
, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 67-73, 2008.
, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.
, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 183-190, 2008.
, "Acoustic Characteristics of a Circulation Control Airfoil", 15th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2009-3103, Miami, FL, May, 2009.
, "Adaptive Control of Separated Flow", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1401, Reno, NV, January, 2006.
, "Adaptive Feedback Control of Flow Separation", 3rd Flow Control Conference, AIAA Paper 2006-3016, San Francisco, CA, June, 2006.
, "Adaptive identification of fluid dynamic systems", 31th fluid dynamics conference & Exhibit, AIAA paper 2001-2978, June, 2001.
, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.
, "Aero-Optic Measurement Facility Characterization", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.
, "Analysis of a Composite Piezoelectric Circular Plate with Initial Stresses for MEMS", International Mechanical Engineering Congress & Exposition, ASME Paper IMECE2002-39337, New Orleans, LA, November, 2002.
, "Analysis of Coherent Power Techniques for Aeroacoustic Testing", Florida Center for Advanced Aero-Propulsion (FCAAP) – Annual Technical Symposium 2009, Orlando, August, 2009.
, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.
, "An Analytical Model for Thermoelastic Actuation of Composite Diaphragms", 12th International Conference on Solid-State Sensors and Actuators, Boston, MA, pp. 1844-1847, June, 2003.
, "Benefits of Using Hysteresis Effects for Closed-Loop Separation Control by Plasma Actuator", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.
, "Characterization of a Micromachined Thermal Shear Stress Sensor", 39th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0247, Reno, NV, January, 2001.
, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.
, "Characterization of Compliant-Backplate Helmholtz Resonators for an Electromechanical Acoustic Liner", 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA Paper 2002-0666, Reno, NV, January, 2002.
, "Chip-scale electrodynamic synthetic jet actuators", 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2015), Estoril, Portugal, IEEE, 01/2015.
, "A Comparative Study of a 1/4-scale Gulfstream G550 Aircraft Nose Gear Model", 15th AIAA/CEAS Aeroacoustics Conference (30th AIAA Aeroacoustics Conference), AIAA Paper 2009-3153, May, 2009.
, "A comparative study of two methods for driving electrodynamic zero-net-mass-flux actuators", 6th AIAA Flow Control Conf., New Orleans, LA, AIAA, 06/2012.
, "Comparison of the two microphone method and the modal decomposition method for acoustic impedance testing", 12th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2006-2695, Cambridge, MA, May, 2006.
, "Comparison of Trailing Edge Noise Measurement Methods", Florida Center for Advanced Aero-Propulsion (FCAAP) - Annual Technical Symposium 2010, Tallahassee, August 2010.
,