Publications

Mazzoleni, M. J., B. P. Bernard, N. Garraud, D. P. Arnold, and B. P. Mann, "Theoretical and Experimental Analysis of Bifurcation Induced Passive Bandgap Reconfiguration", Conference Proceedings of the Society for Experimental Mechanics SeriesNonlinear Dynamics, vol. 1, Cham, Springer International Publishing, pp. 155 - 162, 2016.

Mazzoleni, M. J., B. P. Bernard, N. Garraud, D. P. Arnold, and B. P. Mann, "Theoretical and Experimental Analysis of Bifurcation Induced Passive Bandgap Reconfiguration", Conference Proceedings of the Society for Experimental Mechanics SeriesNonlinear Dynamics, vol. 1, Cham, Springer International Publishing, pp. 155 - 162, 2016.

Cattafesta, L., Y. Tian, and R. Mittal, The Aerodynamics of Heavy Vehicles II: Trucks, Buses, and Trains, Lecture Notes in Applied and Computational Mechanics, vol. 21: Springer, pp. 151-160, DEC, 2008.

Cattafesta, L., Y. Tian, and R. Mittal, The Aerodynamics of Heavy Vehicles II: Trucks, Buses, and Trains, Lecture Notes in Applied and Computational Mechanics, vol. 21: Springer, pp. 151-160, DEC, 2008.

Cattafesta, L., C. Bahr, and J. Mathew, "Fundamentals of Wind-Tunnel Design", Encyclopedia of Aerospace Engineering, vol. 1: Wiley, 2010.

Murray, N., Q. Song, L. Cattafesta, and L. Ukeiley, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 183-190, 2008.

Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.

Sheplak, M., L. Cattafesta, and Y. Tian, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 67-73, 2008.

Murray, N., Q. Song, L. Cattafesta, and L. Ukeiley, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 183-190, 2008.

R Isfahani, N., and S. Moghaddam, "Absorption Characteristics of Thin Lithium Bromide (LiBr) Solution Film Constrained by a Porous Hydrophobic Membrane", ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, Sapporo, Japan, 06/2013.

Tian, Y., L. Cattafesta, and R. Mittal, "Adaptive Control of Separated Flow", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1401, Reno, NV, January, 2006.

Williams, M. D., B. A. Griffin, A. Ecker, J. Meloy, and M. Sheplak, "An Aluminum Nitride Piezoelectric Microphone for Aeroacoustics Applications", Hilton Head 2010: A Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, Transducer Research Foundation, Inc., 06/2010.

Hsu, A., C. Cowan, W. Chu, B. McCoy, A. Wong-Foy, R. Pelrine, C. Velez, D. P. Arnold, J. Lake, J. Ballard, et al., "Automated 2D micro-assembly using diamagnetically levitated milli-robots", 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), Montreal, QC, IEEE, 2017.

Benard, N., J-P. Bonnet, E. Moreau, J. Griffin, and L. Cattafesta, "Benefits of Using Hysteresis Effects for Closed-Loop Separation Control by Plasma Actuator", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.

Takmeel, Q., and S. Moghaddam, "Catalytic Activity of Pt/Ru Formed by Atomic Layer Deposition (ALD)", 13th International Conference on Atomic Layer Deposition, San Diego, CA, 2013.

Mills, D. A., W. C. Patterson, C. Keane, and M. Sheplak, "Characterization of a Fully-Differential Capacitive Wall Shear Stress Sensor for Low-Speed Wind Tunnels", 2018 AIAA Aerospace Sciences Meeting2018 AIAA Aerospace Sciences Meeting, Kissimmee, FloridaReston, Virginia, American Institute of Aeronautics and Astronautics, 2018.

Mills, D. A., W. C. Patterson, B. Freidkes, C. Keane, and M. Sheplak, "Characterization of a Fully-Differential, Dual-Axis, Capacitive Wall Shear Stress Sensor System for Low-Speed Wind Tunnels", AIAA Aviation 2019 ForumAIAA Aviation 2019 Forum, Dallas, TexasReston, Virginia, American Institute of Aeronautics and Astronautics, 2019.

Sheplak, M., E. Spina, and C. McGinley, "Characterization of a Hot-Film Probe for Hypersonic Flow", 6th AIAA International Aerospace Plane and Hypersonic Technologies Conference, AIAA Paper 95-6110, Nashville, TN, April, 1995.

Mills, D. A., C. Barnard, and M. Sheplak, "Characterization of a Hydraulically Smooth Wall Shear Stress Sensor for Low-Speed Wind Tunnel Applications", 55th AIAA Aerospace Sciences Meeting55th AIAA Aerospace Sciences Meeting, Grapevine, TexasReston, Virginia, American Institute of Aeronautics and Astronautics, 2017.

Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.

Rao, Y., K. M. McEachern, and D. P. Arnold, "A Compact Human-Powered Energy Harvesting System", PowerMEMS 2013, vol. 476, London, UK, IOP Publishing, pp. 012011, 12/2013.

Griffin, J., M. Oyarzun, L. Cattafesta, J. H. Tu, C. W. Rowley, and R. Mittal, "Control of a canonical separated flow", 43rd AIAA Fluid Dynamics Conference, San Diego, CA, 06/2013.

Cleveland, C., M. E. Orazem, and S. Moghaddam, "Corrosion of Copper in De-Aerated Water by Impedance Spectroscopy", 223rd Electrochemical Society Meeting, Ontario, Canada, 05/2013.

Young, C., M. Baykan, A. Agarwal, H. Madan, K. Akarvardar, C. Hobbs, I. Ok, W. Taylor, C.E. Smith, M.M. Hussain, et al., "Critical Discussion on (100) and (110) Orientation Dependent Transport: nMOS Planar and FinFET", Symposium on VLSI Technology, Kyoto, Japan, 2011.

Young, C., M. Baykan, A. Agarwal, H. Madan, K. Akarvardar, C. Hobbs, I. Ok, W. Taylor, C.E. Smith, M.M. Hussain, et al., "Critical Discussion on (100) and (110) Orientation Dependent Transport: nMOS Planar and FinFET", Symposium on VLSI Technology, Kyoto, Japan, 2011.