Publications

Found 1228 results
Author [ Title(Desc)] Type Year
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
D
Tanguy, Q., S. Bargiel, H. Xie, N. Passilly, M. Barthès, O. Gaiffe, J. Rutkowski, P. Lutz, and C. Gorecki, "Design and Fabrication of a 2-Axis Electrothermal MEMS Micro-Scanner for Optical Coherence Tomography", Micromachines, vol. 8, issue 6, pp. 146, Jan-06-2017.
Tseng, V. F. G., and H. Xie, "Design and fabrication of a high-density multilayer metal–insulator–metal capacitor based on selective etching", Journal of Micromechanics and Microengineering, vol. 23, issue 3, pp. 035025, 03/2013.
Wang, H., Y. Yu, Z. Chen, H. Yang, H. Jiang, and H. Xie, "Design and Fabrication of a Piezoelectric Micromachined Ultrasonic Transducer Array Based on Ceramic PZT", IEEE Sensors, New Delhi, India, IEEE, 2018.
Tseng, V.F.-G., J. Li, X. Zhang, and H. Xie, "Design and fabrication of an electromagnetically actuated optical switch with precise tilt angle control", Optical MEMS and Nanophotonics (OMN), 2013 International Conference on, pp. 67-68, Aug, 2013.
Xie, H., Z. Pan, W. Frey, and G. K. Fedder, "Design and fabrication of an integrated CMOS-MEMS 3-axis accelerometer", Proc. of the 2003 Nanotechnology Conference, San Francisco, CA, USA, 2003.
Patrick, E., M. Ordonez, C. Batich, J. C. Sanchez, and T. Nishida, "Design and Fabrication of Flexible Substrate Microelectrode Array for Brain Machine Interfaces", IEEE EMBS, New York, NY, August, 2006.
Wang, M., I. Batarseh, K. Ngo, and H. Xie, "Design and Fabrication of Integrated Power Inductor Based on Silicon Molding Technology", Proc. of the 38th Annual IEEE Power Electronics Specialists Conference (PESC'07), Orlando, FL, IEEE, 06/2007.
Zhou, Y., J. Johnson, L. Wu, S. Maley, A. Ural, and H. Xie, "Design and Fabrication of Microheaters for Localized Carbon Nanotube Growth", 2008 8th IEEE Conference on Nanotechnology (NANO)2008 8th IEEE Conference on Nanotechnology, Arlington, Texas, USA, IEEE, pp. 452 - 455, 2008.
Oyarzun, M., and L. Cattafesta, "Design and Optimization of Piezoceramic Zero-Net Mass-Flux Actuators", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 07/2010.
Jansson, D., J. Mathew, J. Hubner, M. Sheplak, and L. Cattafesta, "Design and Validation of an Aeroacoustic Test Facility", 8th AIAA / CEAS Aeroacoustics Conference, AIAA Paper 2002-2466, Breckenridge, CO, June, 2002.
Garraud, N., R. Dhavalikar, L. Maldonado-Camargo, D. P. Arnold, and C. Rinaldi, "Design and validation of magnetic particle spectrometer for characterization of magnetic nanoparticle relaxation dynamics", AIP Advances, vol. 7, issue 5, pp. 056730, 05/2017.
Garraud, N., R. Dhavalikar, L. Maldonado-Camargo, D. P. Arnold, and C. Rinaldi, "Design and validation of magnetic particle spectrometer for characterization of magnetic nanoparticle relaxation dynamics", AIP Advances, vol. 7, issue 5, pp. 056730, Jan-05-2017.
Martin, D., "Design, fabrication, and characterization of a MEMS dual-backplate capacitive microphone", Deparment of Electrical and Computer Engineering, vol. Ph.D., Gainesville, University of Florida, pp. 250, 2007.
Desai, V. H., B. S. Spearman, C. S. Shafor, S. Natt, B. Teem, J. B. Graham, E. W. Atkinson, R. A. Wachs, E. A. Nunamaker, K. J. Otto, et al., "Design, fabrication, and characterization of a scalable tissue-engineered-electronic-nerve-interface (TEENI) device", 2017 8th International IEEE/EMBS Conference on Neural Engineering (NER), Shanghai, China, IEEE, 2017.
Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.
Rendon-Hernandez, A., and S. Basrour, "On the design guidelines for miniaturizing thermo-magnetically activated piezoelectric energy generator", Journal of Physics: Conference Series, vol. 1052, pp. 012053, Jan-07-2018.
Kadirvel, K., D. Martin, J. Liu, R. M. Fox, M. Sheplak, L. Cattafesta, and T. Nishida, "Design, Modeling and Simulation of a Closed-Loop Controller for a Dual Backplate MEMS Capacitive Microphone", 6th IEEE Conference on Sensors, Atlanta, GA, pp. 87-90, October, 2007.
Min, M., W. LEE, T. Burks, J. Jordan, A. Schumann, J. Schueller, and H. Xie, "Design of a hyperspectral nitrogen sensing system for orange leaves", Computers and Electronics in Agriculture, vol. 63, issue 2, pp. 215 - 226, 10/2008.
Homeijer, B., L. Cattafesta, T. Nishida, and M. Sheplak, "Design of a MEMS Piezoresistive Microphone for use in Aeroacoustic Measurements", 13th AIAA/CEAS Aeroacoustics Conference and Exhibit, Rome, Italy, May, 2007.
Boniche, I., S. Masilamani, R. Durscher, B. C. Morgan, and D. P. Arnold, "Design of a Miniaturized Thermoelectric Generator using Micromachined Silicon Substrates", Journal of Electronic Materials, vol. 38, no. 7, pp. 1293-1302, 07/2009.
Masilamani, S., I. Boniche, C. D. Meyer, R. Durscher, and D. P. Arnold, "Design of a tubular microfabricated power generation system for hot exhaust streams", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Germany, pp. 249-252, November, 2007.
Williams, M. D., J. Zito, J. Agashe, A. Sopeju, and D. P. Arnold, "Design of an Electrodynamically Actuated Microvalve Using COMSOL Multiphysics and MATLAB", COMSOL Conference, Hannover, Germany, November, 2008.
Patrick, E., V. Sankar, W. Rowe, J. C. Sanchez, and T. Nishida, "Design of an Implantable Intracortical Microelectrode System for Brain-Machine Interfaces", 4th International IEEE EMBS Conference on Neural Engineering, Antalya, Turkey, April, 2009.
Wang, D., L. Fu, J. Sun, H. Jia, and H. Xie, "Design Optimization and Implementation of a Miniature Optical Coherence Tomography Probe Based on a MEMS Mirror", the 4th International Symposium on Photoelectronic Detection and Imaging (ISPDI 2011), Beijing, China, May 24- 26, 2011.
Arnold, D. P., F. Herrault, I. Zana, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Design optimization of an 8-Watt, microscale, axial-flux, permanent-magnet generator", J. Micromech. Microeng., vol. 16, no. 9, pp. s290-s296, SEP, 2006.