Publications

Gallas, Q., R. Holman, T. Nishida, B. Carroll, M. Sheplak, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators", AIAA Journal, vol. 41, issue 2, no. 2, pp. 240-247, MAR, 2003.

Gallas, Q., R. Holman, T. Nishida, B. Carroll, M. Sheplak, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric-Driven Synthetic Jet Actuators", AIAA Journal, vol. 41, issue 2, no. 2, pp. 240-247, MAR, 2003.

V.S., A. Kasyap, A. Phipps, M. Sheplak, K. Ngo, T. Nishida, and L. Cattafesta, "Lumped Element Modeling of Piezoelectric Beams for Vibrational Energy Reclamation", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-, November, 2006.

Jun, J., B. Chou, J. Lin, A. Phipps, X. Shengwen, K. Ngo, D. Johnson, A. Kasyap V.S., T. Nishida, H. T. Wang, et al., "Low-Power Detection of Hydrogen Leakage Using a Self-Powered Wireless Hydrogen Sensor Node", 2006 Spring Meeting of American Inst. Chem. Engineers, Orlando, FL, April, 2006.

Wu, J., G. K. Fedder, and L.R. Carley, "A low-noise low-offset capacitive sensing amplifier for a 50-/spl mu/g//spl radic/Hz monolithic CMOS MEMS accelerometer", IEEE Journal of Solid-State Circuits, vol. 39, issue 5, pp. 722 - 730, 05/2004.

Xu, S., K. Ngo, T. Nishida, G-B. Chung, and A. Sharma, "Low Frequency Pulsed Resonant Converter for Energy Harvesting", IEEE Trans. Power Electronics, vol. 22, pp. 63-68, JAN, 2007.

Gallas, Q., R. Holman, R. Raju, R. Mittal, M. Sheplak, and L. Cattafesta, "Low Dimensional Modeling of Zero-Net Mass Flux Actuators", 2nd AIAA Flow Control Conference, AIAA Paper 2004-2413, Portland, OR, June, 2004.

Bahr, C., and L. Cattafesta, "Limits of Coherence-Based Aeroacoustic Analysis in the Presence of Distributed Sources", Journal of the Acoustical Society of America, vol. 129, no. 6, pp. EL248-EL253, 05/2011.

Lusk, T., L. Cattafesta, and L. Ukeiley, "Leading edge slot blowing on an open cavity in supersonic flow", Experiments in Fluids, 2012.

Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.

Li, Y., V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008.

Park, H. W., D. J. Cummings, R. Arora, J. A. Pellish, R. Reed, R. D. Schrimpf, D. McMorrow, S. E. Armstrong, U. Roh, T. Nishida, et al., "Laser-Induced Current Transients in Strained-Si Diodes", IEEE Transactions Nuclear Science, vol. 56, pp. 7, 12/2009.

Luo, J., Z. Chen, Y. Ding, Q. Chen, J. Ding, J. Cheng, and H. Xie, "A large-piston scanning electrothermal micromirror with a temperature control frame", 2016 International Conference on Optical MEMS and Nanophotonics (OMN), Singapore, Singapore, IEEE, 2016.

Luo, J., Z. Chen, Y. Ding, Q. Chen, J. Ding, J. Cheng, and H. Xie, "A large-piston scanning electrothermal micromirror with a temperature control frame", 2016 International Conference on Optical MEMS and Nanophotonics (OMN), Singapore, Singapore, IEEE, 2016.

Luo, J., Z. Chen, Y. Ding, Q. Chen, J. Ding, J. Cheng, and H. Xie, "A large-piston scanning electrothermal micromirror with a temperature control frame", 2016 International Conference on Optical MEMS and Nanophotonics (OMN), Singapore, Singapore, IEEE, 2016.

Liu, W., C. L. Cassano, X. Xu, and Z.H. Fan, "Laminated Paper-Based Analytical Devices (LPAD) with Origami-Enabled Chemiluminescence Immunoassay for Cotinine Detection in Mouse Serum", Analytical Chemistry, vol. 85, issue 21, pp. 10270 - 10276, 11/2013.

Cassano, C. L., and Z.H. Fan, "Laminated paper-based analytical devices (LPAD): fabrication, characterization, and assays", Microfluidics and Nanofluidics, vol. 15, issue 2, pp. 173 - 181, 8/2013.

Correa, J., C. Crane, and H. Xie, "Kinematic Analysis of a Compliant Microplatform", ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering ConferenceVolume 2: 32nd Mechanisms and Robotics Conference, Parts A and B, Brooklyn, New York, USA, ASME, pp. 331 - 338, 2008.

Correa, J., C. Crane, and H. Xie, "Kinematic Analysis of a Compliant Microplatform", ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering ConferenceVolume 2: 32nd Mechanisms and Robotics Conference, Parts A and B, Brooklyn, New York, USA, ASME, pp. 331 - 338, 2008.

Correa, J., C. Crane, and H. Xie, "Kinematic Analysis and Design of a Compliant Microplatform", Proc. of the American Nuclear Society 2nd International Joint Topical Meeting on Emergency Preparedness & Response and Robotics & Remote Systems, 2008.

Correa, J., C. Crane, and H. Xie, "Kinematic Analysis and Design of a Compliant Microplatform", Proc. of the American Nuclear Society 2nd International Joint Topical Meeting on Emergency Preparedness & Response and Robotics & Remote Systems, 2008.

Utturkar, Y., R. Holman, R. Mittal, B. Carroll, M. Sheplak, and L. Cattafesta, "A Jet Formation Criterion for Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0636, Reno, NV, January, 2003.

Utturkar, Y., R. Holman, R. Mittal, B. Carroll, M. Sheplak, and L. Cattafesta, "A Jet Formation Criterion for Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0636, Reno, NV, January, 2003.

Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.

Murray, N., Q. Song, L. Cattafesta, and L. Ukeiley, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 183-190, 2008.