Publications

Found 1228 results
Author [ Title(Asc)] Type Year
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
S
A Rodriguez, S., N. Garraud, D. Alabi, A. Garraud, and D. P. Arnold, "A simple passive 390 mV ac/dc rectifier for energy harvesting applications", Journal of Physics: Conference Series, vol. 1407, pp. 012018, Jan-11-2019.
Raju, R., E. Aram, R. Mittal, and L. Cattafesta, "Simple Models of Zero-Net Mass-Flux Jets for Flow Control Simulations", International Journal of Flow Control, vol. 1, no. 3, pp. 179-197, SEP, 2009.
Wang, D., C. A. Watkins, S. Koppal, and H. Xie, A silicon optical bench with vertically-oriented micromirrors for active beam steering, 2019.
Wang, M., J. Li, K. Ngo, and H. Xie, "Silicon Molding Techniques for Integrated Power MEMS Inductors", Sensors & Actuators: A. Physical, 2010.
Wang, W., J. Chen, A.S. Zivkovic, C. Duan, and H. Xie, "A silicon based Fourier transform spectrometer base on an open-loop controlled electrothermal MEMS mirror", TRANSDUCERS 2015 - 2015 18th International Solid-State Sensors, Actuators and Microsystems Conference2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, AK, USA, IEEE, pp. 212 - 215, 7/2015.
Das, C., A. Trivedi, K. Mitra, and T. Vo-Dinh, "Short pulse laser propagation through tissues for biomedical imaging", J. Phys. D: Appl. Phys., vol. 36, pp. 1714-1721, FEB, 2003.
Das, C., A. Trivedi, K. Mitra, and T. Vo-Dinh, "Short pulse laser propagation through tissues", SPIE, vol. 4958, pp. 126-136, August, 2003.
Chandrasekharan, V., J. Naughton, and M. Sheplak, "Shear Stress Measurements", Encyclopedia of Aerocpace Engineering, 1, vol. 1, 2010.
Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear layer time-delay correction using a non-intrusive acoustic point source", International Journal of Aeroacoustics, vol. 10, no. 5 & 6, pp. 497-530, 9/2011.
Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear Layer Correction Validation using a Non-Intrusive Acoustic Point Source", 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden, June, 2010.
Garcia-Cordero, J. L., and H. Z. Fan, "Sessile droplets for chemical and biological assays", Lab on a Chip, vol. 17, issue 13, pp. 2150 - 2166, May-23-2017.
Han, K., and T. Nishida, "Sequential substrate and channel hot electron injection to separate oxide and interface traps in n-MOST", Solid-State Electronics, vol. 38, pp. 105-113, JAN, 1995.
Smarslok, B. P., D. Alexander, R. T. Haftka, L. Carraro, and D. Ginsbourger, "Separable Monte Carlo Simulation Applied to Laminated Composite Plates Reliability", 49th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, AIAA, 04/2008.
Fang, S-P., T. Schumann, L. Garcia, and Y.-K. Yoon, "Semiconductor-Based SensorsEmerging Nanotechnology for Strain Gauge Sensor", Semiconductor-Based Sensors: WORLD SCIENTIFIC, pp. 435 - 472, 2016.
Kadirvel, S., F. Liu, S. Horowitz, T. Nishida, K. Ngo, L. Cattafesta, and M. Sheplak, "A Self-Powered Wireless Active Acoustic Liner", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
Arnold, D. P., P. Galle, F. Herrault, S. Das, J. H. Lang, and M. G. Allen, "A self-contained, flow-powered microgenerator system", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 113-115, November, 2005.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", IEEE Trans. Magn., vol. 44, no. 11, pp. 4293-4296, NOV, 2008.
Duan, C., W. Wang, X. Zhang, L. Zhou, A. Pozzi, and H. Xie, "A Self-Aligned 45°-Tilted Two-Axis Scanning Micromirror for Side-View Imaging", Journal of Microelectromechanical Systems, vol. 4, pp. 799-811, 2016.
Rassay, S., F. Hakim, C. Li, C. Forgey, N. Choudhary, and R. Tabrizian, "A Segmented‐Target Sputtering Process for Growth of Sub‐50 nm Ferroelectric Scandium–Aluminum–Nitride Films with Composition and Stress Tuning", physica status solidi (RRL) – Rapid Research Letters, vol. 15, issue 5, pp. 2100087, Jan-05-2021.
Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
Xie, H., Y. Pan, and G. K. Fedder, "A SCS Micromirror for Optical Coherance Tomographic Imaging", Sensors & Actuators, vol. 103, pp. 237-241, JAN, 2003.
Xie, H., Y. Pan, and G. K. Fedder, "A SCS CMOS micromirror for optical coherence tomographic imaging", MEMS 2002 IEEE International Conference. , Las Vegas, NV, USA, IEEE, pp. 495 - 498, 2002.
Smith, C. S., K. Sondhi, B. Y. Jimenez, H. Z. Fan, T. Nishida, and D. P. Arnold, "Screen-printed inductive silver ink strain sensor on stretchable TPU substrate", 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), Virtual, 2020.
Smith, C. S., R. Bowrothu, Y. Wang, F. Herrault, Y. K. Yoon, and D. P. Arnold, "Screen-Printable, Self-Biased SrM/PDMS Composites for Integrated Magnetic Microwave Devices", IEEE Transactions on Magnetics, vol. 57, issue 10, pp. 1 - 5, Jan-10-2021.
Smith, C. S., K. Sondhi, S. C. Mills, J. S. Andrew, H. Z. Fan, T. Nishida, and D. P. Arnold, "Screen-printable and stretchable hard magnetic ink formulated from barium hexaferrite nanoparticles", Journal of Materials Chemistry C, 2020.