Publications

Zito, J., and D. P. Arnold, "Fabrication and Electrical Characterization of Microscale Dielectric Barrier Discharge Devices", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head), Hilton Head, SC, pp. 238-241, 06/2010.

Liu, L., L. Wu, P. Zory, and H. Xie, "Fiber-optic confocal microscope with an electrothermally-actuated, large-tunable-range microlens scanner for depth scanning", 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS)2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS), Wanchai, Hong Kong, China, IEEE, pp. 827 - 830, 2010.

Zito, J., D. P. Arnold, R. Durscher, and S. Roy, "Investigation of impedance characteristics and power delivery for dielectric barrier discharge plasma actuators", 48th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2010.

Guo, Z. Yang, L. Tao Lin, Q. Cheng Zhao, Z. Chuan Yang, H. Xie, and G. Zhen Yan, "A Lateral-Axis Microelectromechanical Tuning-Fork Gyroscope With Decoupled Comb Drive Operating at Atmospheric Pressure", Journal of Microelectromechanical Systems, vol. 19, issue 3, pp. 458 - 468, 06/2010.

Guo, Z. Yang, Q. Cheng Zhao, L. Tao Lin, Z. Chuan Yang, H. Xie, and G. Zhen Yan, "Normally On/Off Integrated Latching Acceleration Switch With Controlled Fracture Beams and Independent Multicontact", IEEE Electron Device Letters, vol. 31, issue 2, pp. 129 - 131, 02/2010.

Chen, T-A., D. Mills, V. Chandrasekharan, H. Zmuda, and M. Sheplak, "Optical Miniaturization of a MEMS-Based Floating Element Shear Stress Sensor with Moir", 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-0498, 01/2010.

Sells, J., V. Chandrasekharan, H. Zmuda, M. Sheplak, and D. P. Arnold, "Passive Wireless Direct Shear Stress Measurement", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 368-371, 06/2010.

Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear Layer Correction Validation using a Non-Intrusive Acoustic Point Source", 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden, June, 2010.

Yardibi, T., C. Bahr, N. Zawodny, F. Liu, L. Cattafesta, and J. Li, "Uncertainty Analysis of the Standard Delay-and-Sum Beamformer and Array Calibration", Journal of Sound and Vibration, vol. 329, no. 13, pp. 2654-2682, 06/2010.

Zhou, Y., J. Johnson, A. Ural, and H. Xie, "Carbon nanotube-cmos integration based on a maskless post-CMOS process", Proc. of the Nanoelectronic Devices for Defense & Security (NANO-DDS) Conference, Fort Lauderdale, FL, 2009.

Zawodny, N., F. Liu, T. Yardibi, and L. Cattafesta, "A Comparative Study of a 1/4-scale Gulfstream G550 Aircraft Nose Gear Model", 15th AIAA/CEAS Aeroacoustics Conference (30th AIAA Aeroacoustics Conference), AIAA Paper 2009-3153, May, 2009.

Zhou, Y., J. Johnson, A. Ural, and H. Xie, "Localized Growth of Carbon Nanotubes on CMOS Substrate at Room Temperature Using Maskless Post-CMOS Processing", IEEE Transactions on Nanotechnology, 2009.

Zhao, Y., Y.K. Yoon, S-O. Choi, X. Wu, Z. Liu, and M. G. Allen, "Three dimensional metal pattern transfer for replica molded microstructures", Applied Physics Letters, vol. 94, no. 2, 2009.

Yardibi, T., C. Bahr, N. Zawodny, F. Liu, L. Cattafesta, and J. Li, "Uncertainty Analysis of the Standard Delay-and-Sum Beamformer and Array Calibration", 15th AIAA/CEAS Aeroacoustics Conference, Miami, FL, May, 2009.

Zhou, Y., J. Johnson, L. Wu, S. Maley, A. Ural, and H. Xie, "Design and Fabrication of Microheaters for Localized Carbon Nanotube Growth", 2008 8th IEEE Conference on Nanotechnology (NANO)2008 8th IEEE Conference on Nanotechnology, Arlington, Texas, USA, IEEE, pp. 452 - 455, 2008.

Williams, M. D., J. Zito, J. Agashe, A. Sopeju, and D. P. Arnold, "Design of an Electrodynamically Actuated Microvalve Using COMSOL Multiphysics and MATLAB", COMSOL Conference, Hannover, Germany, November, 2008.

Zhang, J., C. Das, and H. Z. Fan, "Dynamic coating for protein separation in cyclic olefin copolymer microfluidic devices", Microfluidics and Nanofluidics, vol. 5, issue 3, pp. 327 - 335, 9/2008.

Herrault, F., D. P. Arnold, I. Zana, P. Galle, and M. G. Allen, "High temperature operation of multi-watt, axial-flux, permanent-magnet microgenerators", Sensors & Actuators A, vol. 148, pp. 299-305, NOV, 2008.

Das, C., J. Zhang, N. Denslow, and H. Z. Fan, "Integration of Isoelectric Focusing with Multi-channel Gel Electrophoresis by Using Microfluidic Pseudo-valves", Lab on a Chip, vol. 7, pp. 1806-1812, 12/2007.

Guo, B., J. Li, H. Zmuda, and M. Sheplak, "Multifrequency Microwave-Induced Thermal Acoustic Imaging for Breast Cancer Detection", IEEE Trans. Bio. Eng., vol. 54, no. 11, pp. 2000-2010, NOV, 2007.

Suthram, S., J. Ziegert, T. Nishida, and S. Thompson, "Piezoresistance Coefficients of (100) Silicon nMOSFETs Measured at Low and High ( 1.5GPa) Channel Stress", IEEE Electron. Dev. Lett., vol. 28, pp. 58-61, JAN, 2007.

Arnold, D. P., F. Herrault, I. Zana, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Design optimization of an 8-Watt, microscale, axial-flux, permanent-magnet generator", J. Micromech. Microeng., vol. 16, no. 9, pp. s290-s296, SEP, 2006.

Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines integrated into bulk-micromachined silicon", J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.

Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.

Das, S., D. P. Arnold, I. Zana, J. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.