Publications

Found 189 results
Author Title Type [ Year(Asc)]
Filters: First Letter Of Title is M  [Clear All Filters]
2006
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.
Das, S., D. P. Arnold, I. Zana, J. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in square ducts", J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.
Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.
Qu, H., D. Fang, and H. Xie, "A Monolithic CMOS-MEMS 3-Axis Accelerometer with A Low-Noise, Low-Power Dual Chopper Amplifier", Solid-state Sensors, Actuators and Microsystem Workshop, Hilton Head, SC, pp. 224-227, June, 2006.
Todd, S., A. Jain, H. Qu, and H. Xie, "A Multi-Degree-of-Freedom Micromirror Utilizing Inverted-Series-Connected Bimorph Actuators", Journal of Optics A: Pure and Applied Optics, vol. 8, pp. s352-s359, 06/2006.
2005
Zana, I., F. Herrault, D. P. Arnold, and M. G. Allen, "Magnetic patterning of permanent-magnet rotors for microscale motor/generators", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 116-119, November, 2005.
Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.
Xie, H., "MEMS-based endoscopic optical coherence tomography", MOEMS Display and Imaging Systems IIIProceedings of SPIE, vol. 5721, San Jose, CA, USA, SPIE, pp. 81 - 92, 2005.
Xie, H., "MEMS-Based Optical Coherence Imaging", 2005 Pacific Rim Conference on Lasers & Electro-Optics2005 Pacific Rim Conference on Lasers & Electro-Optics, Tokyo, Japan, IEEE, pp. 187 - 188, 2005.
Xie, H., G. K. Fedder, and Y. Pan, "MEMS-based Optical Coherence Tomography", Proceedings of at the SPIE Photonics West: MOEMS-MEMS 2005, San Jose, CA, 2005.
Qu, H., D. Fang, and H. Xie, Microfabrication and Characterization of an Integrated 3-Axis CMOS-MEMS Accelerometer: IEEE, pp. 60 - 67, 2005.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.
Das, S., D. P. Arnold, I. Zana, J. Park, J. H. Lang, and M. G. Allen, "Multi-watt electric power from a microfabricated permanent-magnet generator", Tech. Dig. 18th IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2005), Miami Beach, FL, pp. 287-290, January, 2005.
2004
Fredrickson, C. K., and H. Z. Fan, "Macro-to-Micro Interface for Microfluidic Devices", Lab on a Chip, vol. 4, no. 6, pp. 526-533, SEP, 2004.
Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines embedded in fusion-bonded silicon", Tech. Dig. Solid-State Sensor, Actuator, and MicrosystemsWorkshop (Hilton Head 2004), pp. 129-132, June, 2004.
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
Kegerise, M., E. Spina, S. Garg, and L. Cattafesta, "Mode-Switching and Nonlinear Effects in Compressible Flow Over a Cavity", Physics of Fluids, vol. 16, no. 3, pp. 678-687, MAR, 2004.
2003
Arnold, D. P., F. Cros, T. Glover, M. G. Allen, K. Hillman, and D. Veazie, "Materials and fabrication methods for high-temperature micro-magnetic machines for micro-turbine power generation", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 77-81, April, 2003.
Tuzzo, S., D. Martin, T. Nishida, L. Cattafesta, and M. Sheplak, "A MEMS-Based Sound Intensity Probe", 9th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2003-3260, Hilton Head, SC, May, 2003.
Cros, F., D. P. Arnold, M. G. Allen, S. Das, H. Koser, and J. H. Lang, "Micro-magnetic induction machines for portable power applications", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 17-21, April, 2003.