Publications

Cheng, S., N. Wang, and D. P. Arnold, "Optimization of magnetic vibrational energy harvesting systems using equivalent circuit representations", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2007), Freiburg, Germany, pp. 89-92, November, 2007.

Arnold, D. P., I. Zana, F. Herrault, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Optimization of a microscale, axial-flux, permanent-magnet generator", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 165-168, November, 2005.

Das, S., D. P. Arnold, I. Zana, J. Park, J. H. Lang, and M. G. Allen, "Multi-watt electric power from a microfabricated permanent-magnet generator", Tech. Dig. 18th IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2005), Miami Beach, FL, pp. 287-290, January, 2005.

Cheng, S., and D. P. Arnold, "A Multi-Pole Magnetic Generator with Enhanced Voltage Output for Low-Frequency Vibrational Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2008), Sendai Japan, pp. 125-128, November, 2008.

Oniku, O. D., A. Garraud, E. Shorman, W. C. Patterson, and D. P. Arnold, "Modeling of a micromagnetic imprinting process", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2014), Hilton Head, SC, pp. 187-190, 06/2014.

Oniku, O. D., and D. P. Arnold, "Mitigation of interfacial silicide reactions for electroplated CoPt films on Si substrates", Journal of Physics: Conference Series, vol. 660, no. 1, pp. 012140, 2015.

Garraud, A., O. D. Oniku, W. C. Patterson, E. Shorman, D. LeRoy, N. M. Dempsey, and D. P. Arnold, "Microscale Magnetic Patterning Of Hard Magnetic Films Using Microfabricated Magnetizing Masks", 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), San Francisco, CA, IEEE, 2014.

Zito, J., D. P. Arnold, T. Houba, J. Soni, R. Durscher, and S. Roy, "Microscale dielectric barrier discharge plasma actuators: performance characterization and numerical comparison", 43rd AIAA Plasmadynamics and Lasers Conf., New Orleans, LA, AIAA, 06/2012.

Morgan, B. C., S. S. Bedair, W. Nothwang, D. P. Arnold, C. D. Meyer, B. Bowers, A. Sopeju, C. M. Dougherty, L. Xue, and R. Bashirullah, "Micro-power requirements & conversion for autonomous microsystems", NATO SET-150 Specialist Meeting on Energy Technologies & Management for Portable Power for Military Applications, Brdo pri Kranju, Slovenia, 05/2009.

Cros, F., D. P. Arnold, M. G. Allen, S. Das, H. Koser, and J. H. Lang, "Micro-magnetic induction machines for portable power applications", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 17-21, April, 2003.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined thick-film copper power inductors and transformers for integrated power converters", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2010), Hilton Head, SC, pp. 455-458, 06/2010.

Velez, C., and D. P. Arnold, "Microfabrication of magnetically attached end effectors for micro/milli robots", Proc. 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS 2017), Montreal, Canda, 07/2017.

Li, Y., T. Nishida, D. P. Arnold, and M. Sheplak, "Microfabrication of a wall shear stress sensor using side-implanted piezoresistive tethers", Proceeding of SPIE 14th Annual International Symposium on Smart Structures and Materials, Paper No.6529-13, San Diego, CA, May, 2007.

Bowers, B., O. D. Oniku, and D. P. Arnold, "Microfabrication and process integration of powder-based permanent magnets", Technologies for Future Micro-Nano Manufacturing, Napa, California, August 2011.

Sells, J., V. Chandrasekharan, J. Meloy, M. Sheplak, H. Zmuda, and D. P. Arnold, "Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor", 2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.

Garraud, N., D. Alabi, J.D. Varela, D. P. Arnold, and A. Garraud, "Microfabricated electrodynamic wireless power receiver for bio-implants and wearables", 2018 Digital Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, South Carolina, USASan Diego, Transducer Research Foundation, 2018.

Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductor with high inductance density via mechanical energy storage", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 181-184, 11/2011.

Bowers, B., J. Agashe, and D. P. Arnold, "A method to form bonded micromagnets embedded in silicon", Proc. 14th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 07), vol. 2, pp. 1581-1584, June, 2007.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Metal-On-Silicon Differential Capacitive Shear Stress Sensor", Tech. Dig. 15th Int. Conf. Solid-State Sensors, Actuators, and Microsystems (Transducers 2009), Denver, CO, June, 2009.

Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.

Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.

Challa, V. R., and D. P. Arnold, "MEMS electrodynamic vibrational energy harvesters using multi-pole magnetic architectures", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A MEMS Direct Skin Friction Sensor", Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.

Zito, J., R. Durscher, J. Soni, S. Roy, and D. P. Arnold, "Mechano-fluidic characterization of microscale dielectric barrier discharge plasma actuators", Hilton Head 2012, Hilton Head Island, SC, 06/2012.

Arnold, D. P., F. Cros, T. Glover, M. G. Allen, K. Hillman, and D. Veazie, "Materials and fabrication methods for high-temperature micro-magnetic machines for micro-turbine power generation", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 77-81, April, 2003.