Publications

Sawant, S. G., B. George, L. S. Ukeiley, and D. P. Arnold, "Microfabricated Electrodynamic Synthetic Jet Actuators", Journal of Microelectromechanical Systems, vol. 27, issue 1, pp. 95 - 105, Nov-17-2017, 2018.

Cheng, S., and D. P. Arnold, "Microfabricated electrodynamic transformers for electromechanical power conversion", J. Micromech. Microeng., vol. 23, no. 11, pp. 10, 11/2013.

Wang, Y., B. Y. Jimenez, C. S. Smith, A. A. Rendon-Hernandez, J. Samman, and D. P. Arnold, "Microfabricated Electro-Permanent Magnets Using AlNiCo and CoPt", IEEE Magnetics Letters, vol. 12, pp. 1 - 5, Jan-01-2021.

Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.

Das, S., D. P. Arnold, I. Zana, J. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.

Qu, H., D. Fang, and H. Xie, Microfabrication and Characterization of an Integrated 3-Axis CMOS-MEMS Accelerometer: IEEE, pp. 60 - 67, 2005.

Oniku, O. D., and D. P. Arnold, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.

Acosta, M. A., X. Jiang, P-K. Huang, K. B. Cutler, C. S. Grant, G. M. Walker, and M. P. Gamcsik, "A microfluidic device to study cancer metastasis under chronic and intermittent hypoxia", Biomicrofluidics, vol. 8, issue 5, pp. 054117, 09/2014.

Martin, D., J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.

Boniche, I., and D. P. Arnold, "Micromachined radial thermoelectric modules for power generation using hot gas streams", J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Micromachined wiring board with integrated microinductor for chip-scale power conversion", IEEE Trans. Power Electron, vol. 29, no. 11, Nov. 2014.

Harrison, D. J., K. Fluri, K. Seiler, H. Z. Fan, C. S. Effenhauser, and A. Manz, "Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip", Science, vol. 261, issue 5123, pp. 895 - 897, 08/1993.

Z. Fan, H., and D. J. Harrison, "Micromachining of capillary electrophoresis injectors and separators on glass chips and evaluation of flow at capillary intersections", Analytical Chemistry, vol. 66, pp. 177-184, SEP, 1994.

Xu, X., K. Liu, and Z.H. Fan, "Microscale 2D separation systems for proteomic analysis", Expert Review of Proteomics, vol. 9, issue 2, pp. 135 - 147, 04/2012.

Chandrasekharan, V., J. Sells, J. Meloy, D. P. Arnold, and M. Sheplak, "A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor", Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.

Fazeli, A., S. Bigham, and S. Moghaddam, "Microscale layering of liquid and vapor phases within microstructures for a new generation two-phase heat sink", International Journal of Heat and Mass Transfer, vol. 95, pp. 368 - 378, Jan-04-2016.

Fazeli, A., and S. Moghaddam, "Microscale phase separator for selective extraction of CO 2 from methanol solution flow", Journal of Power Sources, vol. 271, pp. 160 - 166, Jan-12-2014.

Peng, C., H. Lai, M. E. Orazem, and S. Moghaddam, "Microstructure of clay fabric in electrokinetic dewatering of phosphatic clay dispersions", Applied Clay Science, vol. 158, pp. 94 - 101, Jan-06-2018.

Kim, J., and Y.K. Yoon, "Microworld: United We Stand", Lab on a Chip, vol. 10, 2010.

Wu, L., and H. Xie, "A Millimeter-Tunable-Range Microlens for Endoscopic Biomedical Imaging Applications", IEEE Journal of Quantum Electronics, vol. 46, issue 9, pp. 1237 - 1244, 09/2010.

Halim, M. A., A. A. Rendon-Hernandez, S. E. Smith, J. M. Samman, N. Garraud, and D. P. Arnold, "Miniature Electrodynamic Wireless Power Transmission Receiver Using a Micromachined Silicon Suspension", Journal of Microelectromechanical Systems, vol. 30, issue 1, pp. 144 - 155, Jan-02-2021.

Dai, X., H. Yang, T. Shan, H. Xie, S. A. Berceli, and H. Jiang, "Miniature Endoscope for Multimodal Imaging", ACS Photonics, vol. 4, issue 1, pp. 174 - 180, Dec-20-2016, 2017.

Luo, S., L. Zhou, D. Wang, C. Duan, H. Liu, Y. Zhu, G. Li, H. Zhao, J. Tang, Y. Wu, et al., "A Miniature Endoscopic Optical Coherence Tomography Probe Based on C-Lens", IEEE Photonics Journal, vol. 10, issue 5, pp. 1 - 10, Jan-10-2018.

Liu, L., L. Wu, J. Sun, E. Lin, and H. Xie, "Miniature endoscopic optical coherence tomography probe employing a two-axis microelectromechanical scanning mirror with through-silicon vias", Journal of Biomedical Optics, vol. 16, issue 2, pp. 026006, 2011.

Yang, H., D. Wang, T. Shan, X. Dai, H. Xie, L. Yang, and H. Jiang, "Miniature fluorescence molecular tomography (FMT) endoscope based on a MEMS scanning mirror and an optical fiberscope", Physics in Medicine & Biology, vol. 64, issue 12, pp. 125015, Jan-06-2019.