Publications

Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.

Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.

Horner, D., S. Ravi, and S. Moghaddam, "Monoporous micropillar wick structures, II-optimization & theoretical limits", Applied Thermal Engineering, vol. 73, issue 1, pp. 1378 - 1386, Jan-12-2014.

Harrison, D. J., K. Fluri, K. Seiler, H. Z. Fan, C. S. Effenhauser, and A. Manz, "Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip", Science, vol. 261, issue 5123, pp. 895 - 897, 08/1993.

Han, F., W. Wang, X. Zhang, and H. Xie, "Modeling and Control of a Large-Stroke Electrothermal MEMS Mirror for Fourier Transform Microspectrometers", Journal of Microelectromechanical Systems, vol. 4, pp. 750-760, 2016.

Han, F., W. Wang, X. Zhang, and H. Xie, "Miniature Fourier transform spectrometer with a dual closed-loop controlled electrothermal micromirror", Optics Express, vol. 24, issue 20, pp. 22650, Jan-01-2016.

Halim, M. A., A. A. Rendon-Hernandez, S. E. Smith, J. M. Samman, N. Garraud, and D. P. Arnold, "Miniature Electrodynamic Wireless Power Transmission Receiver Using a Micromachined Silicon Suspension", Journal of Microelectromechanical Systems, vol. 30, issue 1, pp. 144 - 155, Jan-02-2021.

Habibimatin, M., and S. Moghaddam, "Mechanism of transition from elongated bubbles to wavy-annular regime in flow boiling through microchannels", International Journal of Heat and Mass Transfer, vol. 176, pp. 121464, Jan-09-2021.

Guo, B., J. Li, H. Zmuda, and M. Sheplak, "Multifrequency Microwave-Induced Thermal Acoustic Imaging for Breast Cancer Detection", IEEE Trans. Bio. Eng., vol. 54, no. 11, pp. 2000-2010, NOV, 2007.

Griffin, B. A., V. Chandrasekaran, M. D. Williams, B. V. Sankar, and M. Sheplak, "Model for thermoelastic actuation of an axisymmetric isotropic circular plate via an internal harmonic heat source", International Journal of Solids and Structures, 02/2011.

Garraud, A., O. D. Oniku, W. C. Patterson, E. Shorman, D. LeRoy, N. M. Dempsey, and D. P. Arnold, "Microscale Magnetic Patterning Of Hard Magnetic Films Using Microfabricated Magnetizing Masks", 2014 IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), San Francisco, CA, IEEE, 2014.

Garraud, N., A. Garraud, D. Munzer, M. Althar, and D. P. Arnold, "Modeling and experimental analysis of rotating magnet receivers for electrodynamic wireless power transmission", Journal of Physics D: Applied Physics, vol. 52, issue 18, pp. 185501, Feb-27-2019.

Fredrickson, C. K., and H. Z. Fan, "Macro-to-Micro Interface for Microfluidic Devices", Lab on a Chip, vol. 4, no. 6, pp. 526-533, SEP, 2004.

Fazeli, A., S. Bigham, and S. Moghaddam, "Microscale layering of liquid and vapor phases within microstructures for a new generation two-phase heat sink", International Journal of Heat and Mass Transfer, vol. 95, pp. 368 - 378, Jan-04-2016.

Fazeli, A., and S. Moghaddam, "Microscale Phase Separation through Nanoporous Membranes", ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, 2013.

Fazeli, A., and S. Moghaddam, "Microscale phase separator for selective extraction of CO 2 from methanol solution flow", Journal of Power Sources, vol. 271, pp. 160 - 166, Jan-12-2014.

Fazeli, A., H. M. Matin, and S. Moghaddam, "Mechanism of Microlayer Formation and Evaporation in Microchannels – New Physical Insights and Governing Correlations", 15th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM), Cambridge, MA, 2017.

Z. Fan, H., and D. J. Harrison, "Micromachining of capillary electrophoresis injectors and separators on glass chips and evaluation of flow at capillary intersections", Analytical Chemistry, vol. 66, pp. 177-184, SEP, 1994.

Z. Fan, H., P. Jensen, C. Lee, and J. King, "Monitoring the refolding pathway for a large multimeric protein using capillary zone electrophoresis", Journal of Chromatography A, pp. 315-323, SEP, 1997.

Z. Fan, H., C. Manzanas, M. Alipanahrostami, J. A. Lednicky, and C-Y. Wu, Multiplex Devices and Methods for Pathogen Detection, 2021.

Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductors with high inductance density via mechanical energy storage", J. Micromech. Microeng., vol. 22, no. 9, pp. 11, 08/2012.

Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductor with high inductance density via mechanical energy storage", Tech. Dig. 11th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2011), Seoul, Korea, pp. pp. 181-184, 11/2011.

Dhavalikar, R., J. Chan, S. Savliwala, M. Unni, N. Garraud, D. P. Arnold, and C. Rinaldi, "Monitoring magnetic nanoparticle synthesis progress using a benchtop magnetic particle relaxometer", AIChE Annual Meeting, Minneapolis, MN, 2017.

Das, S., D. P. Arnold, I. Zana, J. Park, M. G. Allen, and J. H. Lang, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part I: modeling", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1330-1350, OCT, 2006.

Das, S., D. P. Arnold, I. Zana, J. Park, J. H. Lang, and M. G. Allen, "Multi-watt electric power from a microfabricated permanent-magnet generator", Tech. Dig. 18th IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2005), Miami Beach, FL, pp. 287-290, January, 2005.