Publications

Pal, S., and H. Xie, "Analysis and Fabrication of Curved Multimorph Transducers that Undergo Bending and Twisting", IEEE/ASME Journal of Microelectromechanical Systems (accepted, In Press), 2012.

Sun, J., C. Duan, S. Samuelson, and H. Xie, "Design and Characterization of MEMS Based Optical Coherence Tomography Endoscopic Probe", Biomedical OpticsBiomedical Optics and 3-D Imaging, Miami, FloridaWashington, D.C., OSA, pp. BTu3A.79, 2012.

Pal, S., and H. Xie, "Fabrication of robust electrothermal MEMS devices using aluminum–tungsten bimorphs and polyimide thermal isolation", Journal of Micromechanics and Microengineering, vol. 22, issue 11, pp. 115036, 11/2012.

Xi, L., S. Grobmyer, L. Wu, R. Chen, G. Zhou, L. Gutwein, J. Sun, W. Liao, Q. Zhou, H. Xie, et al., "Intraoperative photoacoustic tumor imaging", Biomedical OpticsBiomedical Optics and 3-D Imaging, Miami, FloridaWashington, D.C., OSA, pp. BSu3A.48, 2012.

Liu, L., S. Pal, and H. Xie, "MEMS mirrors based on a curved concentric electrothermal actuator", Sensors and Actuators A: Physical (In Press), 2012.

Liu, L., S. Pal, and H. Xie, "MEMS mirrors based on a curved concentric electrothermal actuator", Sensors and Actuators A: Physical, 3/2012.

Pal, S., S. Samuelson, and H. Xie, "Novel mechanisms for millimeter range piston actuation of vertical micromirrors and microlenses", International Conference on Optical MEMS and Nanophotonics, Banff, Alberta, Canada, 2012.

Liu, L., and H. Xie, "Three-dimensional confocal scanning microscope using an MEMS mirror for lateral scan and an MEMS lens scanner for depth scan", Optical MEMS and Nanophotonics (OMN), 2012 International Conference on, pp. 158-159, Aug, 2012.

Li, J., K. D. T. Ngo, G-Q. Lu, and H. Xie, "Wafer-level fabrication of high-power-density MEMS passives based on silicon molding technique", Integrated Power Electronics Systems (CIPS), 2012 7th International Conference on, pp. 1-5, March, 2012.

Li, J., K. D. T. Ngo, G-Q. Lu, and H. Xie, "Wafer-level fabrication of high-power-density MEMS passives based on silicon molding technique", Integrated Power Electronics Systems (CIPS), 2012 7th International Conference on, pp. 1-5, March, 2012.

Wu, L., S. Samuelson, J. Sun, K. Jia, W. Lau, S. Choe, B. S. Sorg, and H. Xie, "A 2.8-mm imaging probe based on a high-fill-factor mems mirror and wire-bonding-free packaging for endoscopic optical coherence tomography", IEEE MEMS 2011, Cancun, Mexico, 2011.

Pal, S., and H. Xie, "Analysis, simulation and fabrication of curved multimorphs that undergo bending and twisting", Sensors, 2011 IEEE, pp. 667-670, Oct, 2011.

Sun, H., K. Jia, X. Liu, G. Zhen Yan, Y-W. Hsu, R. M. Fox, and H. Xie, "A CMOS-MEMS Gyroscope Interface Circuit Design With High Gain and Low Temperature Dependence", IEEE Sensors Journal, vol. 11, issue 11, pp. 2740 - 2748, 11/2011.

Pal, S., and H. Xie, "A Curved Multimorph Based Electrothermal Micromirror with Large Scan Range and Low Drive Voltage", Sensors & Actuators: A. Physical, vol. 170, pp. pp. 156-163, 2011.

Pal, S., and H. Xie, "Design and Fabrication of 2D Fast Electrothermal Micromirrors with Large Scan Range and Small Center Shift", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.

Wang, D., L. Fu, J. Sun, H. Jia, and H. Xie, "Design Optimization and Implementation of a Miniature Optical Coherence Tomography Probe Based on a MEMS Mirror", the 4th International Symposium on Photoelectronic Detection and Imaging (ISPDI 2011), Beijing, China, May 24- 26, 2011.

Jia, K., S. Samuelson, and H. Xie, "High-Fill-Factor Micromirror Array With Hidden Bimorph Actuators and Tip–Tilt-Piston Capability", Journal of Microelectromechanical Systems, 2011.

Sun, H., D. Fang, K. Jia, F. Maarouf, H. Qu, and H. Xie, "A Low-Power Low-Noise Dual-Chopper Amplifier for Capacitive CMOS-MEMS Accelerometers", IEEE Sensors Journal, vol. 11, issue 4, pp. 925 - 933, 04/2011.

Liu, L., S. Pal, and H. Xie, "MEMS Mirrors Based on Curved Concentric Electrothermal Actuators with Very Small Lateral Shift and Tilt", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.

Sun, J., and H. Xie, "MEMS-Based Endoscopic Optical Coherence Tomography", International Journal of Optics, vol. 2011, no. 825629, 2011.

Liu, L., L. Wu, J. Sun, E. Lin, and H. Xie, "Miniature endoscopic optical coherence tomography probe employing a two-axis microelectromechanical scanning mirror with through-silicon vias", Journal of Biomedical Optics, vol. 16, issue 2, pp. 026006, 2011.

Liao, W., W. Liu, L. Xi, J. Sun, Y. Zhu, L. Wu, H. Jiang, and H. Xie, "Miniature Photoacoustic Imaging Probe Using MEMS Scanning Micromirror", IEEE Optical MEMS and Nanophotonics, Istanbul, Turkey, 08/2011.

Lee, S.J., J. Sun, J. Flint, S. Guo, H. Xie, M. King, and M. Sarntinoranont, "Optically based-indentation technique for acute rat brain tissue slices and thin biomaterials", Journal of Biomedical Materials Research: Part B - Applied Biomaterials, vol. 97B, no. 1,, 2011.

Zhu, Y., W. Liu, K. Jia, W. Liao, and H. Xie, "A piezoelectric unimorph actuator based tip-tilt-piston micromirror with high fill factor and small tilt and lateral shift", Sensors and Actuators A: Physical, vol. 167, issue 2, no. 6, pp. 495 - 501, 6/2011.

Lee, S. Jin, J. Sun, M. King, H. Xie, and M. Sarntinoranont, "Viscoelastic Property Changes of Acute Rat Brain Tissue Slices As A Function Of Cell Viability", ASME 2011 Summer Bioengineering Conference (SBC2011), Famington, Pennsylvania, USA, June 22-25, 2011.