Publications

Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear layer time-delay correction using a non-intrusive acoustic point source", International Journal of Aeroacoustics, vol. 10, no. 5 & 6, pp. 497-530, 9/2011.

Bahr, C., and L. Cattafesta, "Limits of Coherence-Based Aeroacoustic Analysis in the Presence of Distributed Sources", Journal of the Acoustical Society of America, vol. 129, no. 6, pp. EL248-EL253, 05/2011.

Bahr, C., T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, Vancouver, Canada, May, 2008.

Bahr, C., N. Zawodny, B. Bertolucci, K. Woolwine, F. Liu, J. Li, M. Sheplak, and L. Cattafesta, "Measurement of Phased Array Point Spread Functions for use with Beamforming", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.

Bahr, C., and L. Cattafesta, "Comparison of Trailing Edge Noise Measurement Methods", Florida Center for Advanced Aero-Propulsion (FCAAP) - Annual Technical Symposium 2010, Tallahassee, August 2010.

Bahr, C., J. Li, and L. Cattafesta, "Aeroacoustic Measurements in Open-jet Wind Tunnels - An Evaluation of Methods Applied to Trailing Edge Noise", 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June, 2011.

Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear Layer Correction Validation using a Non-Intrusive Acoustic Point Source", 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden, June, 2010.

Baek, SK., Y.K. Yoon, and J-H. Park, "Wireless actuated microvalve system using induction heating and its thermal effect on the microfluidic system", International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers’11), Beijing, China, 06/2011.

Azie, O., K. Castillo-Torres, Z. Greenberg, D. P. Arnold, and J. Dobson, "Magnetically triggered release of active TGF-B from spin vortex microdiscs", Journal of Magnetism and Magnetic Materials, vol. 546, pp. 168732, Jan-03-2022.

Augustine, S., P. Gu, X. Zheng, T. Nishida, and H. Z. Fan, "Low-power electrically controlled thermoelastic microvalves integrated in thermoplastic microfluidic devices", Microfluidics and Nanofluidics, vol. 19, issue 6, pp. 1385 - 1394, 12/2015.

Arunajatesan, S., Q. Song, M. Palavicini, C. Moreno, and L. Cattafesta, "Towards Adaptive Closed-Loop Control of Transonic Cavity Flows", 4th Flow Control Conference: AIAA, 06/2008.

Arunajatesan, S., M. Oyarzun, M. Palavicini, and L. Cattafesta, "Modeling of Zero-Net Mass-Flux Actuators for Feedback Flow Control", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0743, January, 2009.

Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines integrated into bulk-micromachined silicon", J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.

Arnold, D. P., F. Cros, I. Zana, D. Veazie, and M. G. Allen, "Electroplated metal microstructures embedded in fusion-bonded silicon: conductors and magnetic materials", J. Microelectromech. Syst., vol. 13, no. 5, pp. 791-798, OCT, 2004.

Arnold, D. P., and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, 2009.

Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.

Arnold, D. P., F. Herrault, I. Zana, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Design optimization of an 8-Watt, microscale, axial-flux, permanent-magnet generator", J. Micromech. Microeng., vol. 16, no. 9, pp. s290-s296, SEP, 2006.

Arnold, D. P., and N. Wang, "Permanent Magnets for MEMS", J. Microelectromech. Syst., vol. 18, no. 6, pp. 1255-1266, 12/2009.

Arnold, D. P., I. Zana, F. Cros, and M. G. Allen, "Vertically-laminated magnetic cores by electroplating Ni-Fe into micromachined Si", IEEE Trans. Magn., vol. 40, no. 4, pp. 3060-3062, JUL, 2004.

Arnold, D. P., P. Galle, F. Herrault, S. Das, J. H. Lang, and M. G. Allen, "A self-contained, flow-powered microgenerator system", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 113-115, November, 2005.

Arnold, D. P., I. Zana, J. Park, S. Das, Y. Joung, D. Veazie, J. H. Lang, and M. G. Allen, "High-speed characterization and mechanical modeling of microscale, axial-flux, permanent-magnet generators", 13th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers 05), vol. 1, Seoul, Korea, pp. 701-704, June, 2005.

Arnold, D. P., "Review of microscale magnetic power generation", IEEE Trans. Magn., vol. 43, no. 11, pp. 3940-3951, NOV, 2007.

Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.

Arnold, D. P., H. Burch, M. Mitchell, A. Garraud, and R. Moore, "Spinning magnets: an unconventional method for compact generation of ELF radio signals", IEEE AP-S/URSI, San Diego, CA, 2017.

Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "A directional acoustic array using silicon micromachined piezoresistive microphones", J. Acous. Soc. Amer., vol. 113, no. 1, pp. 289-298, JAN, 2003.