Publications

Found 161 results
Author Title Type [ Year(Asc)]
Filters: Author is Lou Cattafesta  [Clear All Filters]
2006
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Piezoelectric Microphone for Aeroacoustics Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in square ducts", J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.
Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.
Liu, F., S. Horowitz, L. Cattafesta, and M. Sheplak, "Optimization of an Electromechanical Helmholtz Resonator", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
Mathew, J., Q. Song, B. V. Sankar, M. Sheplak, and L. Cattafesta, "Optimized Design of Piezoelectric Flap Actuators for Active Flow Control", AIAA Journal, vol. 44, no. 12, pp. 2919-2928, SEP, 2006.
Kadirvel, S., F. Liu, S. Horowitz, T. Nishida, K. Ngo, L. Cattafesta, and M. Sheplak, "A Self-Powered Wireless Active Acoustic Liner", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
Nishida, T., J. Lin, K. Ngo, F. Ren, D. Norton, S. J. Pearton, L. Cattafesta, M. Sheplak, J. Jun, A. Kasyap V.S., et al., "Wireless Hydrogen Sensor Self-powered Using Ambient Vibration and Light", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-14644, November, 2006.
2005
Mathew, J., C. Bahr, M. Sheplak, B. Carroll, and L. Cattafesta, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.
Horowitz, S., T. Nishida, L. Cattafesta, and M. Sheplak, "Design and Characterization of a Micromachined Piezoelectric Microphone", 11th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2005-2998, May, 2005.
Mathew, J., C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.
Chandrasekaran, V., A. Cain, T. Nishida, L. Cattafesta, and M. Sheplak, "Dynamic calibration technique for thermal shear-stress sensors", Experiments in Fluids, vol. 38, pp. 56-65, JUL, 2005.
Holman, R., Y. Utturkar, R. Mittal, B. Smith, and L. Cattafesta, "Formation Criterion for Synthetic Jets", AIAA Journal, vol. 43, issue 10, no. 10, pp. 2110-2116, OCT, 2005.
Horowitz, S., M. Sheplak, L. Cattafesta, and T. Nishida, "MEMS Acoustic Energy Harvester", 5th International Workshop on Micro Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Tokyo, Japan, November, 2005.
Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.
Liu, J., D. Martin, K. Kadirvel, T. Nishida, L. Cattafesta, M. Sheplak, and B. Mann, "Nonlinear System Identification of a MEMS Dual-Backplate Capacitive Microphone by Harmonic Balance Method", 2005 ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2005-82880, Orlando, FL, November, 2005.
Mittal, R., R. B. Kotapati, and L. Cattafesta, "Numerical Study of Resonant Interactions and Flow Control in a Canonical Seperated Flow", AIAA 43rd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2005-1261, Reno, NV, December, 2005.
2004
Carroll, B., E. Boulos, M. Sytsma, L. Cattafesta, J. Hubner, and M. Sheplak, "Aero-Optic Measurement Facility Characterization", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0936, January, 2004.
Gallas, Q., R. Holman, R. Raju, R. Mittal, M. Sheplak, and L. Cattafesta, "Low Dimensional Modeling of Zero-Net Mass Flux Actuators", 2nd AIAA Flow Control Conference, AIAA Paper 2004-2413, Portland, OR, June, 2004.
Sheplak, M., L. Cattafesta, and T. Nishida, "MEMS Shear Stress Sensors: Promise and Progress", 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, AIAA 2004-2606 (invited), Portland, OR, June, 2004.
Horowitz, S., T-A. Chen, V. Chandrasekaran, K. Tedjojuwono, T. Nishida, L. Cattafesta, and M. Sheplak, "A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-1042, Reno, NV, January, 2004.
Kegerise, M., E. Spina, S. Garg, and L. Cattafesta, "Mode-Switching and Nonlinear Effects in Compressible Flow Over a Cavity", Physics of Fluids, vol. 16, no. 3, pp. 678-687, MAR, 2004.
Horowitz, S., T-A. Chen, L. Cattafesta, M. Sheplak, T. Nishida, and V. Chandrasekaran, "Optical Flow Sensor Using Geometric Moire Interferometry", 34th International Conference on Environmental Systems, SAE Paper 2004-01-2267, Colorado Springs, CO, July, 2004.
Kegerise, M., R. Cabell, and L. Cattafesta, "Real-Time Adaptive Control of Flow-Induced Cavity Tones", 42nd Aerospace Sciences Meeting and Exhibit, AIAA Paper 2004-0572, January, 2004.
Taylor, R., F. Liu, S. Horowitz, K. Ngo, T. Nishida, L. Cattafesta, and M. Sheplak, "Technology Development for Electromechanical Acoustic Liners", Active 04 Paper a04-093, Williamsburg, VA, September, 2004.