Publications

Found 249 results
Author Title [ Type(Desc)] Year
Filters: Author is David P. Arnold  [Clear All Filters]
Conference Paper
Sells, J., V. Chandrasekharan, H. Zmuda, M. Sheplak, and D. P. Arnold, "Passive Wireless Direct Shear Stress Measurement", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 368-371, 06/2010.
Halim, M. A., J. M. Samman, S. E. Smith, and D. P. Arnold, "Piezoceramic Electrodynamic Wireless Power Receiver Using Torsion Mode Meandering Suspension", 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS), Krakow, Poland, IEEE, 2019.
Paprotny, I., A. Waterbury, V. R. Challa, Q. Xu, D. P. Arnold, S. Sanders, and P. K. Wright, "Piezoelectrodynamic gyrator: analysis, experiments, and applications to wireless power transfer", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.
Arnold, D. P., S. Bhardwaj, S. Gururaj, T. Nishida, and M. Sheplak, "A Piezoresistive Microphone for Aeroacoustic Measurements", Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
Morgan, B. C., S. S. Bedair, J. S. Pulskamp, R. G. Polcawich, C. D. Meyer, C. M. Dougherty, L. Xue, D. P. Arnold, R. Bashirullah, R. Miller, et al., "Power considerations for MAST platforms", Proc. SPIE Defense Security & Sensing Conf. (Micro- and Nanotechnology Sensors, Systems, and Applications II), vol. 7679, no. 76790V, 12 pages, Orlando, FL, 05/2010.
Morgan, B. C., S. S. Bedair, C. D. Meyer, L. Xue, C. M. Dougherty, R. Bashirullah, and D. P. Arnold, "Power for autonomous microsystems", 27th Army Science Conf., Orlando, FL, 11/2010.
Meyer, C. D., S. S. Bedair, B. C. Morgan, X. Lin, R. Bashirullah, D. P. Arnold, I. M. Kierzewski, and N. Lazarus, "Power management for small scale systems", Proc. SPIE Defense Security & Sensing Conf. (Micro- and Nanotechnology Sensors, Systems, and Applications VI), vol. 9083, Baltimore, MD, pp. 90831U, 05/2014.
Jacobson, S., S. Das, N. Savoulides, J. Steyn, J. H. Lang, H. Li, C. Livermore, M. Schmidt, C. Teo, S. Umans, et al., "Progress toward a microfabricated gas turbine generator for soldier portable power applications", Proc. 24th Army Science Conf., Orlando, FL, November, 2004.
Boniche, I., C. D. Meyer, P. Taylor, N. Dhar, and D. P. Arnold, "Progress towards a micromachined thermoelectric generator using PbTe and PbSnSeTe thin films", Tech. Dig. 6th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2006), Berkeley, CA, pp. 195-198, November, 2006.
Boniche, I., and D. P. Arnold, "Radial Thermoelectric Generator Modules for In-Line Power Generation From Hot Gas Streams", Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head), Hilton Head, SC, pp. 118-121, 06/2010.
Cheng, S., and D. P. Arnold, "A resonant DC/AC inverter using an electromechanical device", PowerMEMS 2011, Seoul, Korea, 11/2011.
Wen, X., J. Starr, J. S. Andrew, and D. P. Arnold, "A scalable nanomanufacturing process for nanocomposite magnetic microstructures", Workshop on Enabling Nanofabrication for Rapid Innovation, Napa, CA, 05/2013.
Smith, C. S., K. Sondhi, B. Y. Jimenez, H. Z. Fan, T. Nishida, and D. P. Arnold, "Screen-printed inductive silver ink strain sensor on stretchable TPU substrate", 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), Virtual, 2020.
Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
Arnold, D. P., P. Galle, F. Herrault, S. Das, J. H. Lang, and M. G. Allen, "A self-contained, flow-powered microgenerator system", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 113-115, November, 2005.
A. Rodriguez, S., N. Garraud, D. Alabi, A. Garraud, and D. P. Arnold, "A simple passive 390 mV ac/dc rectifier for energy harvesting applications", 18th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Application (Power MEMS 2018), Daytona Beach, FL, 2018.
Velez, C., W. C. Patterson, and D. P. Arnold, "Simulation and experimental validation of a selective magnetization process for batch-patterning magnetic layers", Journal of Physics: Conference Series, vol. 660, no. 1, pp. 012006, 2015.
Bowers, B., and D. P. Arnold, "Spherical Magnetic Generators for Bio-Motional Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (Power MEMS 2008), Sendai, Japan, pp. 281-284, November, 2008.
Velez, C., Z. I. Gonzalez, J. F. Osma, and D. P. Arnold, "Sub-millimeter electropermanent magnets for microgrippers", Proc. 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS 2017), Montreal, Canada, 07/2017.
Clingenpeel, T., S. Hwangbo, N. Garraud, D. P. Arnold, and Y-K. Yoon, "Thermal Stability of Cu/Co Metaconductor and Its Millimeter Wave Applications", 2018 IEEE 68th Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, IEEE, 2018.
Xue, L., C. D. Meyer, D. P. Arnold, and R. Bashirullah, "Towards miniature step-up power converters for mobile microsystems", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1451-1455, 03/2011.
Castillo-Torres, K. Y., N. Garraud, E. S. McLamore, and D. P. Arnold, "Towards pathogen detection via optical interrogation of magnetic microdiscs", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2016), Hilton Head, SC, 06/2016.
Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Ultra-miniaturized power converter modules using micromachined copper scaffolds", Hilton Head 2012, Hilton Head Island, SC, 06/2012.
Bernard, B. P., J. W. Peyser, B. Mann, and D. P. Arnold, "Using the mass ratio to induce band gaps in a 1D array of nonlinearly coupled oscillators", Proc. ASME 2012 Int. Design Engineering Tech. Conf. & Computers and Information in Eng. Conf. (IDETC/CIE 2012), Chicago, IL, ASME, 08/2012.
Cheng, S., R. Sathe, R. D. Natarajan, and D. P. Arnold, "A Voltage-Multiplying Self-Powered AC/DC Converter with 0.35 V Minimum Input Voltage for Energy Harvesting Applications", Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1311-1318, 03/2011.